Sharp UP-600 / UP-700 (serv.man23) Service Manual ▷ View online
14. [14 BACKUP SEND]
DISPLAY: Setting item select screen
Select "14 BACKUP SEND" and press the ENTER key.
DISPLAY: BACKUP SEND screen
Select the item and press the ENTER key.
The contents of item are shown in the table below.
DISPLAY
CONTENTS
SELECT ITEM
MRS
SEND DATA
Send content
select
ALL RAM
ALL RAM
SSP
SPEED
Communication
speed setting
PROGRAMMED
PROGRAMMED
115,200 bps
57,600 bps
38,400 bps
19,200 bps
9,600 bps
4,800 bps
2,400 bps
Only channel 2 is available. For connection, a modular-D-sub con-
version cable is required.
For the modular-D-sub conversion cable, see Service Manual.
version cable is required.
For the modular-D-sub conversion cable, see Service Manual.
15. [15 BACKUP RECEIVE]
DISPLAY: Setting item select screen
Select "15 BACKUP RECEIVE" and press the ENTER key.
DISPLAY: BACKUP RECEIVE screen
Select the item and press the ENTER key.
The contents of item are shown in the table below.
DISPLAY
CONTENTS
SELECT ITEM
MRS
SPEED
Communication
speed setting
PROGRAMMED
PROGRAMMED
115,200 bps
57,600 bps
38,400 bps
19,200 bps
9,600 bps
4,800 bps
2,400 bps
Only channel 2 is available. For connection, a modular-D-sub con-
version cable is required.
For the modular-D-sub conversion cable, see Service Manual.
version cable is required.
For the modular-D-sub conversion cable, see Service Manual.
CHAPTER 4. SRV MODE PROGRAMMING ("3 IRC SET UP")
Before trying to perform inline setup, make sure to create (or delete)
the files required by the inline system using the following procedure:
[SRV MODE] - [2 SETTING] - [10 FILE]. And then perform inline
setup.
the files required by the inline system using the following procedure:
[SRV MODE] - [2 SETTING] - [10 FILE]. And then perform inline
setup.
DISPLAY: SRV mode screen
Select "3 IRC SET UP" and press the ENTER key.
DISPLAY: IRC SET UP item selection screen
Select the item and press the ENTER key.
The item setting input screen is displayed.
1. [1 TERMINAL SETTING]
DISPLAY: Setting item selection screen
Select the item to be changed and press the ENTER key.
The contents of setting are shown in the table below.
[1 SATELLITE]
DISPLAY: Setting screen
Select the item to be changed and press the ENTER key.
The setting content is described below.
DISPLAY
TEXT
CONTENTS
SELECT ITEM
MRS
IP ADDRESS 1
192
IP ADDRESS 2
168
IP ADDRESS 3
000
IP ADDRESS 4 Terminal No.
001-254
000
CLERK
Clerk system
CENTRALIZED CENTRALIZED
INDIVIDUAL
GLU
GLU system
CENTRALIZED CENTRALIZED
INDIVIDUAL
OTHER SAVE
FILE
FILE
Other save file
EXIST
NOT
NOT
BACKUP
MASTER
MASTER
Backup
master function
master function
EXIST
NOT
NOT
Regarding IP address 1-3, use the same address for all machines
(master, back-up master, and satellites) on the inline system.
(master, back-up master, and satellites) on the inline system.
For IP address 4, enter the terminal No. on the inline system.
When all the machine are set, press the [TL] key.
The [IRC SET UP] screen appears to start the setup.
DISPLAY:
IRC SET UP
1: SAVE FILE DELETE
2: OTHER FILE DELETE
3: SAVE FILE NON CREATE
4: OTHER FILE CREATE
2: OTHER FILE DELETE
3: SAVE FILE NON CREATE
4: OTHER FILE CREATE
[2 MASTER]
DISPLAY: Setting screen
Select the item to be changed and press the ENTER key.
The setting content is described below.
DISPLAY TEXT
CONTENTS
SELECT ITEM
MRS
IP ADDRESS 1
192
IP ADDRESS 2
168
IP ADDRESS 3
000
IP ADDRESS 4 Terminal No.
001-254
000
CLERK
Clerk system
CENTRALIZED CENTRALIZED
INDIVIDUAL
GLU
GLU system
CENTRALIZED CENTRALIZED
INDIVIDUAL
OTHER SAVE
FILE
FILE
Other save file
EXIST
NOT
NOT
BACKUP
MASTER
MASTER
Backup master
function
function
EXIST
NOT
NOT
Regarding IP address 1-3, use the same address for all machines
(master, back-up master, and satellites) on the inline system.
(master, back-up master, and satellites) on the inline system.
For IP address 4, enter the terminal No. on the inline system.
When all the machine are set, press the [TL] key.
The [IRC SET UP] screen appears to start the setup.
DISPLAY:
[3 BACKUP MASTER]
DISPLAY: Setting screen
Select the item to be changed and press the ENTER key.
The setting content is described below.
DISPLAY TEXT
CONTENTS
SELECT ITEM
MRS
IP ADDRESS 1
192
IP ADDRESS 2
168
IP ADDRESS 3
000
IP ADDRESS 4 Terminal No.
001-254
000
CLERK
Clerk system
CENTRALIZED CENTRALIZED
INDIVIDUAL
GLU
GLU system
CENTRALIZED CENTRALIZED
INDIVIDUAL
OTHER SAVE
FILE
FILE
Other save file
EXIST
NOT
NOT
Regarding IP address 1-3, use the same address for all machines
(master, back-up master, and satellites) on the inline system.
(master, back-up master, and satellites) on the inline system.
For IP address 4, enter the terminal No. on the inline system.
When all the machine are set, press the [TL] key.
The [IRC SET UP] screen appears to start the setup.
DISPLAY:
IRC SET UP
1: SAVE FILE DELETE
2: OTHER FILE DELETE
3: SAVE FILE NON CREATE
4: OTHER FILE CREATE
2: OTHER FILE DELETE
3: SAVE FILE NON CREATE
4: OTHER FILE CREATE
IRC SET UP
1: SAVE FILE DELETE
2: OTHER FILE DELETE
3: SAVE FILE NON CREATE
4: OTHER FILE CREATE
2: OTHER FILE DELETE
3: SAVE FILE NON CREATE
4: OTHER FILE CREATE
[4 STD. WITH IRC]
DISPLAY: Setting screen
Select the item to be changed and press the ENTER key.
The setting content is described below.
DISPLAY TEXT
CONTENTS
SELECT ITEM
MRS
IP ADDRESS 1
192
IP ADDRESS 2
168
IP ADDRESS 3
000
IP ADDRESS 4
Terminal No.
001-254
000
[5 STAND ALONE]
Used to restore to a stand alone machine.
Click on the first or last page to see other UP-600 / UP-700 (serv.man23) service manuals if exist.