Sharp ER-A411 / ER-A421 (serv.man5) User Manual / Operation Manual ▷ View online
125
■
Department (continued)
• RECEIPT TYPE (Use the selective entry)
SINGLE:
One receipt is printed on the remote printer.
DOUBLE:
The same two receipts are printed on the remote printer.
• PRINT ON CLK (Use the selective entry)
YES: Prints the department sales information on the clerk report.
NO:
NO:
Prints nothing on the clerk report.
• HALO (Use the numeric entry)
This function is intended for prevention of accidentally entered unreasonably amounts.
Limit amount: 0.00 to 999999.99
Limit amount: 0.00 to 999999.99
NOTE
In the initial programming, the HALO function is programmed as “INVALID”.
• VMP No. (Use the numeric entry)
VMP fi le number for EAN (1 through 3).
If the number “0” is entered, no VMP fi le number is assigned.
If the number “0” is entered, no VMP fi le number is assigned.
• TAXABLE 1 through 6 (Use the selective entry)
Tax status
YES: Taxable
NO:
NO:
Non-taxable
NOTE
• The tax system of your register has been factory-set to automatic VAT1 - 6. If you desire to
select any of automatic tax 1 - 6, manual VAT1 - 6, manual VAT1, manual tax 1 - 6, and the
combination of the automatic VAT 1 - 3 and the automatic tax 4 - 6, contact your authorized
SHARP dealer.
combination of the automatic VAT 1 - 3 and the automatic tax 4 - 6, contact your authorized
SHARP dealer.
• When the combination of the automatic VAT1 - 3 and automatic tax 4 - 6 system is selected,
one of the taxable 1 - 3 can be selected in combination with taxable 4 - 6.
• AGE VERIFY (Use the selective entry)
Age verifi cation function
YES: Enables the age verifi cation function.
NO:
NO:
Disables the age verifi cation function.
126
■
PLU/EAN
NOTE
• In this manual, the word “EAN” represents EAN (European Article Number) and UPC (Universal
Product Code).
• With regard to the EAN codes applicable to this register, please refer to the chapter 13.
• To delete a PLU/EAN item in the “PLU/EAN” window, select the item and press the
• To delete a PLU/EAN item in the “PLU/EAN” window, select the item and press the
;
key. A
confi rmation window appears to ask you whether to delete the item, select the option you prefer.
Procedure
Program each item as follows:
Select a pertinent PLU code, or directly
enter a PLU code or EAN code.
enter a PLU code or EAN code.
▼
The screen continues.
• DEPT. CODE (Use the numeric entry)
Department code to be associated with the entered PLU/EAN
(01 through 99)
When a PLU/EAN is associated with a department,
the following functions of the PLU/EAN depend on the
programming for the department.
• Grouping (group 1 through 14)
• Single item cash sale
• HALO (only for subdepartments)
• Taxability
(01 through 99)
When a PLU/EAN is associated with a department,
the following functions of the PLU/EAN depend on the
programming for the department.
• Grouping (group 1 through 14)
• Single item cash sale
• HALO (only for subdepartments)
• Taxability
• TEXT (Use the character entry)
Description for a PLU/EAN. Up to 16 characters can be entered. (Default text: PLUnnnnn (PLU)/ space
(EAN))
(EAN))
• SIGN (Use the selective entry)
+: Plus PLU/EAN
-:
-:
Minus PLU/EAN
The function of every PLU/EAN varies according to the combination of its sign and the sign of its
associated department as follows:
associated department as follows:
Department: +
Serves as a normal plus PLU/EAN.
PLU/EAN:
+
Department: –
Serves as a normal minus PLU/EAN.
PLU/EAN:
–
Department: +
Accepts store coupon entries, but not split-pricing entries.
PLU/EAN:
–
Department: –
Not valid; not accepted
PLU/EAN:
+
• PRICE 1 through 3 (Use the numeric entry)
Unit price of each price level (max. 8 digits).
• BASE QTY (Use the numeric entry)
Base quantity for each PLU/EAN that should be applied only to split-pricing entries (max. 2 digits: 0 to
99)
99)
• MENU TYPE (Use the selective entry)
PLU/EAN menu type selection
NORMAL: Normal PLU/EAN
SET:
SET:
Set PLU/EAN
LINK:
Link PLU/EAN
127
■
PLU/EAN (continued)
• SET#/LINK# (Use the numeric entry)
Table number for set PLU/EANs/ link PLUs (1 through 99)
If the number “00” is entered, no table number for set PLU/EANs/link PLUs will be assigned to a PLU.
If the number “00” is entered, no table number for set PLU/EANs/link PLUs will be assigned to a PLU.
• COND. TBL# (Use the numeric entry)
You can assign a PLU to a condiment table (01 through 99).
If the number “00” is entered, no condiment table number will be assigned to a PLU.
If the number “00” is entered, no condiment table number will be assigned to a PLU.
NOTE
For EANs, it is fi xed to “00”.
• COND. TYPE (Use the selective entry)
A condiment type PLU is used only for condiment entry and cannot be entered alone.
YES: Sets a PLU as condiment type.
NO:
NO:
Does not set a PLU as condiment type.
NOTE
For EANs, it is fi xed to “NO”.
• CONDIMENT (Use the selective entry)
COMPULSORY:
Makes condiment entry compulsory.
NON COMPUL.:
Makes condiment entry non-compulsory.
NOTE
For EANs, it is fi xed to “NON COMPUL.”.
• COMMISSION# (Use the numeric entry)
You can assign a PLU/EAN to a commission group (1 through 9).
If the number “0” is entered, no commission group number will be assigned to a PLU/EAN.
If the number “0” is entered, no commission group number will be assigned to a PLU/EAN.
• OUTPUT KP No. 1 and 2 (Use the selective entry)
YES: Prints a receipt on the fi rst/second kitchen printer when a PLU/EAN is entered.
NO:
NO:
Does not print a receipt on the fi rst/second kitchen printer when a PLU/EAN is entered.
• ENTRY TYPE (Use the selective entry)
Mode parameter
OPEN:
Open price only
INHIBIT:
Inhibited
OPEN&PRESET: Open price and preset price
PRESET:
PRESET:
Preset price only
NOTE
For EAN, it is fi xed to “PRESET”.
128
■
PLU/EAN (continued)
• TAXABLE 1 through 6 (Use the selective entry)
YES: Makes the PLU/EAN taxable.
NO:
NO:
Makes the PLU/EAN non-taxable.
NOTE
• The tax system of your register has been factory-set to automatic VAT1 - 6. If you desire to
select any of automatic tax 1 - 6, manual VAT1 - 6, manual VAT1, manual tax 1 - 6, and the
combination of the automatic VAT1 - 3 and the automatic tax 4 - 6, contact your authorized
SHARP dealer.
combination of the automatic VAT1 - 3 and the automatic tax 4 - 6, contact your authorized
SHARP dealer.
• When the combination of the automatic VAT1 - 3 and automatic tax 4 - 6 system is selected,
one of the taxable 1 - 3 can be selected in combination with taxable 4 - 6.
• A PLU/EAN not programmed for any of these tax status is registered depending on the tax
status of the department which the PLU/EAN belongs to.
• PLU GROUP (Use the numeric entry)
You can assign a PLU to a PLU group (00 through 99).
• AGE VERIFY (Use the selective entry)
YES: Enables the age verifi cation function.
NO:
NO:
Disables the age verifi cation function.
• NON-ACCESS (Use the selective entry)
NON DEL.: Not delete non-accessed EANs by Z1 report.
DEL. BY Z: Delete non-accessed EANs by Z1 report.
DEL. BY Z: Delete non-accessed EANs by Z1 report.
NOTE
For PLU, it is fi xed to “NON DEL.”.
■
PLU range
You can program PLUs in the designated range.
Procedure
Enter a value or select an option for each item as follows:
▼
The screen continues.
• START (Use the numeric entry)
Starting PLU code (max. 5 digits)
• END (Use the numeric entry)
Ending PLU code (max. 5 digits)
• OPERATION (Use the selective entry)
DELETE:
Enables you to delete a specifi ed range of
PLUs.
PLUs.
MAINTENANCE: Enables you to change the setting you
have programmed.
NEW & MAINTE.: Enables you to change the current setting
when the specifi ed codes have already
been created or to create new codes when
the specifi ed codes have not been created
yet.
been created or to create new codes when
the specifi ed codes have not been created
yet.