Sharp ER-A411 / ER-A421 (serv.man5) User Manual / Operation Manual ▷ View online
117
HW;
i
(TEXT)
(j)*
(k)*
(B)*
S)
: Used for programming characters. For more information about programming characters,
see the section “How to Program Alphanumeric Characters”.
Also the
Also the
;
key is used to delete the record item.
|
I
: Used to move the cursor.
E (
ENTER
(
)
)*
: Used to program each setting.
A
: Used to program each setting and to fi nalize programming.
c (+)*
: Used to cancel programming and to get back to the previous screen.
(g)*
: Used to go back to the previous record, e.g., from the department 2 programming window
back to the department 1 programming window.
(h)*
: Used to go to the next record, for example, in order to program unit prices for sequential
departments.
(x)*
: Used to scroll the window to go to the next page.
(z)*
: Used to scroll the window to go back to the previous page.
l
: Used to clear the last setting you have programmed or clear the error state.
P
: Used to toggle between two or more options.
s
: Used to list those options which you can toggle by the
P
key.
Numeric keys : Used for entering fi gures.
* The keys in brackets are those on the ER-A421 keyboard. In the following sections, the procedure and
key operation will be described using the keys on the ER-A411 keyboard.
118
How to Program Alphanumeric Characters
This section discusses how to program alphanumeric characters for various texts.
■
Mobile phone method (ER-A411)/Text keyboard method (ER-A421)
Entering alphanumeric characters
ER-A411 :
To enter a character, use the numeric keys as shown below.
ER-A411 :
To enter a character, use the numeric keys as shown below.
To enter “A”, press the “8” key.
To enter “B”, press the “8” key twice.
To enter “C”, press the “8” key three times.
To enter “B”, press the “8” key twice.
To enter “C”, press the “8” key three times.
ER-A421 :
To enter a character, simply press a corresponding character key on the programming keyboard.
To enter a character, simply press a corresponding character key on the programming keyboard.
Entering double-size characters
W
:
This key toggles the double-size character mode and the normal-size character mode. The
default is the normal-size character mode. When the double-size character mode is selected,
the letter “W” appears at the bottom of the display.
default is the normal-size character mode. When the double-size character mode is selected,
the letter “W” appears at the bottom of the display.
Entering upper-case letters
H
:
You can enter an upper-case letter by using this key. Press this key just before you enter the
upper-case letter. You should press this key each time you enter an upper-case letter.
upper-case letter. You should press this key each time you enter an upper-case letter.
i
:
You can lock the upper-case letter mode once the this key is pressed.
Entering space
S
:
Enter a space in the cursor position.
To select a text editing mode
)
:
Toggles between the insert mode (“_”) and the overwrite (“ ”) mode.
To move the cursor
: Moves the cursor.
To delete a character or fi gure
;
:
Deletes a character or fi gure in the cursor position.
:
Backs up the cursor for deleting the character or fi gure at the left of the cursor.
To change the text input mode (ER-A411 only)
(TEXT)
:
This key toggles the text input mode, Alphabet (A), European character (Ä), numeric (1), and
symbol ( ).
symbol ( ).
Text copy/paste
Copy :
Move the cursor to the target text line to copy, and press the
key.
Paste :
Move the cursor to the target text line to paste, and press the
key.
119
■
Entering character codes
Numerals, letters and symbols are programmable by entering the
:
key and character codes. Use the
following procedure with the cursor placed at the position where you want to enter characters:
To enter a digit, simply press a corresponding numeric key.
XXX
XXX : character code (3 digits)
º
032
033
034
035
036
037
038
039
040
041
042
043
044
045
046
047
048
049
050
051
052
053
054
055
056
057
058
059
060
061
062
063
064
065
066
067
068
069
070
071
072
073
074
075
076
077
078
079
080
081
082
083
084
085
086
087
088
089
090
091
092
093
094
095
096
097
098
099
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
(DC)
032 - 047
Character
code:
code:
048 - 063
064 - 079
080 - 095
096 - 111
112 - 127
128 - 143
144 - 159
160 - 175
176 - 191
192 - 207
208 - 223
224 - 239
240 - 255
*(DC) : Double-size character code
120
b
Programming
This chapter explains how to program various items.
Before you start programming, press the
Before you start programming, press the
m
key and select PGM1, PGM2, AUTO KEY, SD CARD or iSDC
mode from the mode selection screen depending on the item you are going to program.
Basic Instructions
This section illustrates the basic programming by using an example of programming for departments.
■
Programming screen
Opening screen: When you select the PGM1 or PGM2 mode, your display will show a programming
opening screen corresponding to the mode you selected.
Mode you are in
(In case of PGM2)
Programming menu: Use the cursor keys or numeric keys to
select an option, and press the
E
key.
Numeric entry and status information area
Code selecting screen (Dept. PLU):
Selected menu/option
Code number and its description
(In case of PLU/EAN, two lines are used for one code, upper line -
code, lower line - description.)
Use the cursor keys or numeric keys to select an option, and
press the
Code number and its description
(In case of PLU/EAN, two lines are used for one code, upper line -
code, lower line - description.)
Use the cursor keys or numeric keys to select an option, and
press the
E
key.
Numeric entry and status information area
Programming screen:
Selected code
Setting items:
Use the cursor keys to select an item.
To select an option, follow the instruction shown below.
Numeric entry: Use numeric keys
Character entry: Use character keys
Selective entry: Press the
Setting items:
Use the cursor keys to select an item.
To select an option, follow the instruction shown below.
Numeric entry: Use numeric keys
Character entry: Use character keys
Selective entry: Press the
P
key to toggle options, or press the
s
key to show the option list. Use the cursor
keys to move the cursor and press the
s
or
E
key to select it.
Click on the first or last page to see other ER-A411 / ER-A421 (serv.man5) service manuals if exist.