Panasonic CQ-RG133W1 Service Manual ▷ View online
General
Power Supply
DC 12V (11V - 16V),
Test Voltage 14.4V
Negative Ground
Tone Controls
Bass ; ±12dB at 100Hz
Treble ; ±12dB at 10kHz
Current Consumption
Less than 2.5A (Tape play mode,
0.5W×4ch)
0.5W×4ch)
Maximum Power Output
40W×4ch (at 400Hz, Vol. Max.)
Suitable Speaker Impedance
4-8
Ω
Pre-Amp Output Voltage
2V (CD play mode; 1kHz, 0dB)
Output Impedance
200
Ω
FM Stereo Radio
Frequency Range
87.5 - 108.0MHz
Usable Sensitivity
12.0dBf (1.1µV, 75
Ω
)
Frequency Response
30Hz to 15,000Hz (±3dB)
Alternate Channel Sensitivity
75dB
Stereo Separation
35dB(1kHz)
Signal to Noise Ratio
70dB(Mono)
CQ-RG133W1
Removable Face High-Power Cassette /
Receiver with Changer Control
Receiver with Changer Control
AM Radio
Frequency Range
531 - 1,602kHz
Usable Sensitivity
28dB/µV (25µV, S/N 20dB)
Tape Player
Reproduction System
4-track,2-program stereo
Tape Speed
1-7/8” /sec (4.76cm/sec)
FF/REW Time
Less than 200 sec (C-60)
Wavelength
780nm
Frequency Response
35Hz to 14,000Hz (±3dB)
Signal to Noise Ratio
52dB
Dimensions**
178×50×150mm
Weight**
1.6kg
* Specifications and the design are subject to possible modification
without notice due to improvements.
without notice due to improvements.
** Dimensions and Weight shown are approximate.
AUTOMOTIVE AFTERMARKET
Specification*
Order No. ACED050522C3
1
ABOUT LEAD FREE SOLDER (PbF)
2
2
FEATURES
2
3
REPLACING THE FUSE
2
4
MAINTENANCE
2
5
RADIO ALIGNMENT
2
6
DIMENSIONS
2
7
WIRING CONNECTION
3
8
BLOCK DIAGRAM
4
9
TERMINALS DESCRIPTION
5
1 ABOUT LEAD FREE
SOLDER (PbF)
Distinction of PbF PCB:
PCBs (manufactured) using lead free solder will have a PbF
stamp on the PCB.
stamp on the PCB.
Caution :
·
Pb free solder has a higher melting point than standard
solder; Typically the melting point is 50 - 70°F (30 -
40°C)
solder; Typically the melting point is 50 - 70°F (30 -
40°C)
higher.
Please
use
a
soldering
iron
with
temperature control and adjust it to 700 ± 20°F (370 ±
10°C). In case of using high temperature soldering iron,
please be careful not to heat too long.
10°C). In case of using high temperature soldering iron,
please be careful not to heat too long.
·
Pb free solder will tend to splash when heated too high
(about 1100°F/600°C)
(about 1100°F/600°C)
·
This lead free solder will be used for the products after
serial No. 1,000,001.
serial No. 1,000,001.
2 FEATURES
·
PLL (Phase Locked Loop) Synthesized Tuning
·
1DIN Size Body with Cassette Player,AM/FM Tuner, Power
AMP (30Wx4)
AMP (30Wx4)
·
18-FM , 6-AM stations preset
·
Auto preset and scan function
·
CD Changer Control function
3 REPLACING THE FUSE
Be sure to use a fuse of the specified rating (10A) when
replacing a blown fuse. Fuses with higher capacity ratings,use
of any substitute, or connection without a fuse may result in a
fire hazard or damage to the unit.
replacing a blown fuse. Fuses with higher capacity ratings,use
of any substitute, or connection without a fuse may result in a
fire hazard or damage to the unit.
4 MAINTENANCE
Your product is designed and manufactured to ensure a
minimum of maintenance. Use a soft cloth for routine exterior
cleaning. Never use benzine, or other solvent.
minimum of maintenance. Use a soft cloth for routine exterior
cleaning. Never use benzine, or other solvent.
5 RADIO ALIGNMENT
Do not align the AM/FM package blocks. When the package
block is necessary, it will be supplied already aligned at the
block is necessary, it will be supplied already aligned at the
10 PACKAGE AND IC BLOCK DIAGRAM
6
11 REPLACEMENT PARTS LIST (Unit)
8
12 EXPLODED VIEW (Unit)
12
13 REPLACEMENT PARTS LIST (Tape Player Parts)
13
14 EXPLODED VIEW (Tape Deck)
15
15 WIRING DIAGRAM
16
16 SCHEMATIC DIAGRAM
19
17 SCHEMATIC DIAGRAM for printing with A4 size
21
factory.
6 DIMENSIONS
CONTENTS
Page
Page
2
CQ-RG133W1
7 WIRING CONNECTION
3
CQ-RG133W1
8
BLOCK
DIAGRAM
4
CQ-
RG13
3W1