DOWNLOAD Sharp DV-L80 (serv.man18) Service Manual ↓ Size: 2.27 MB | Pages: 113 in PDF or view online for FREE

While a disc is stopped, press SETUP to display the Setup screen.

Use 

' or " to select the “ 

 PARENTAL SETUP”.

Press ENTER to display the password
specification screen.

Use 

', ", \ or | to enter a 4-digit password.

• Press ' or " to select the number.

• Press \ or | to move to the place where you enter the number.

• When you have finished entering your 4-digit number,

       (password verification display) appears.

• You must input the correct password to make any changes in the parental level.

Be sure to keep a separate record of your password somewhere for later
reference.

• Some DVDs allow the viewer to temporarily change the parental level setting to

view the original scenes. When this prompt appears, input the password to view
the original scenes.

Press ENTER to confirm your password, re-enter the numbers you entered
in step 4 using 

', ", \ or |.

• If you enter the wrong number three times in succession, the normal

screen reappears.

If you forget your password, you can erase your current password by
pressing 

 (F.ADV) four times.

Press ENTER and then use 

\ or | to

change the parental level.
• Level 1: for most restrictive viewing 

→

Level 8: for adult viewing
(The smaller the number, the greater the
level of restriction.)

• When the parental level is set to “OFF”,

DVDs can be played back regardless of
the parental level.

 PARENTAL SETUP

    

  

    

PASSWORD:    

????

  

    
    

 

   

    

CODE:     UK

           1   2   3   4   5   6   7   8   OFF

 PARENTAL SETUP

    

  

    

SELECT LEVEL  

    
    

 

   

    

CODE:     UK

           1   2   3   4   5   6   7   8   OFF

Can be changed to
any number between
1 and 8 or OFF.

Press 

" to select “CODE” and then use \ or | to select the desired

country code. (See page 43.)

Press ENTER to confirm the setting.
• To exit the Setup screen and return to the Startup screen, press SETUP

or RETURN.

• Be sure to try playing back the disc to confirm that the parental level setting is

working correctly. If it is not working correctly, try changing the country code.

While a disc is stopped, press SETUP to display the Setup screen.

Use 

' or " to select the “ 

 PARENTAL SETUP”.

Press ENTER to display the password verification screen.

Use 

', ", \ or | to enter the 4-digit password that was set previously.

• Press ' or " to select the number.

• Press \ or | to move to the place where you enter the number.

• When you have finished entering your 4-digit number,

       changes to   

 

  .

If you forget your password, you can erase your current password by
pressing 

 (F.ADV) four times.

Press ENTER and then use 

\ or |  to change the parental level.

• If you enter the wrong number three times in succession, the normal

screen reappears.

Press 

" to select “CODE” and then use \ or | to select the desired

country code. (See page 43.)

Press ENTER to confirm the setting.
• To exit the Setup screen and return to the Startup screen, press SETUP

or RETURN.

Some DVDs will prompt the viewer to temporarily change the parental level. In
this event, the following screen appears.

 PARENTAL SETUP        

    TEMPORARY CHANGE?
                     YES
                     

NO

When this screen appears, use the procedure described below to temporarily
change the level.

Use 

' or " to select “YES” or “NO”.

YES: Temporarily changes the parental level (sets the level to a value

other than the current setting (page 45)).

Does not change the parental level (maintains the current level
(page 45)).

Press ENTER.
• If “NO” was selected in step 1, the

normal screen reappears.

• If “YES” was selected in step 1, the

screen shown on the right appears.

• To temporarily change the parental level, enter your password (page 45)

and confirm the password. The setting automatically changes
temporarily to the disc-specific parental level.

• When you have completed the temporary change procedure, press

ENTER. (The normal screen reappears.)

• This change only applies while the current disc is being played.

 PARENTAL SETUP        

    PASSWORD:     

––––

––––

COMPRESSION .......... Use this setting for increasing the average volume of

Dolby Digital audio when playing a DVD.

 DIGITAL/MPEG .... Use these settings for specifying the type of digital

output when playing a disc recorded using Dolby
Digital/MPEG Audio.

PRO LOGIC ................ Use this setting for playing discs recorded using Dolby

Pro Logic via an analogue connection.

When Dolby Digital is used to record the audio on a DVD, the average overall
volume level of the audio is relatively lower than that produced by a VIDEO CD/
Audio CD. This is to provide the widest possible dynamic range. To counteract
this, your Player automatically raises the overall average volume level of a disc
recorded using Dolby Digital to a level that is similar to that of a VIDEO CD/
Audio CD.

• OFF ....... Audio level recorded on disc is played back without modification.
• ON ........ Dolby Digital average audio level is increased so it sounds similar

to that of a VIDEO CD/Audio CD.

DVD

Dolby Digital audio

COMPRESSION:

OFF

COMPRESSION:

ON

• Low audio level

• Audio level the same

as Audio CD, etc.

VIDEO CDs

Audio CDs