Sharp DV-L80 (serv.man18) User Manual / Operation Manual ▷ View online
GB
24
SETTING UP
Connecting the Player to audio equipment provides normal stereo sound plus
powerful stereo sound enhanced by Dolby Digital (5.1 channel), DTS and
MPEG Audio.
powerful stereo sound enhanced by Dolby Digital (5.1 channel), DTS and
MPEG Audio.
Playing 2 channel audio
The audio analogue input/output jack of the Player also doubles as an optical
digital output jack.
digital output jack.
■ Analogue Connection
Connecting to Audio Equipment
VIDEO
IN/OUT
AUDIO(L/R)
AUDIO OUT
PHONES
SURROUND
C/SW
DIGITAL OUT(OPTICAL)
ANALOG INPUT
L
R
(White)
(Red)
AUDIO (L/R)
Audio cable
(supplied)
(supplied)
Amplifier of stereo system, etc.
To amplifier
audio input jacks
audio input jacks
Jack and Plug Colours
Audio Left: White
Audio Right: Red
Audio Right: Red
After making the above connection
1
Set the “SPEAKER” in “SPEAKER SETUP” to “2ch” (see page 56).
• When connecting to audio equipment, we recommend that you set the
“COMPRESSION (Dolby Digital Output Level)” to “OFF” (see page 47).
25
GB
SETTING UP
■ Digital Connection
Connecting to Audio Equipment
VIDEO
IN/OUT
AUDIO(L/R)
AUDIO OUT
PHONES
SURROUND
C/SW
DIGITAL OUT(OPTICAL)
DIGITAL IN
OPTICAL
COAXIAL
DIGITAL OUT (OPTICAL)
To optical
digital input
jack
digital input
jack
Optical digital cable
(commercially available)
(commercially available)
Audio equipment with
optical digital input jack
optical digital input jack
After making the above connection
1
Set the “SPEAKER” in “SPEAKER SETUP” to “2ch” (see page 56).
2
Set the “
DIGITAL” in “AUDIO SETUP” to “D-PCM” (see page 49).
■ Digital Connection to Audio Equipment or MD Player without a Dolby
Digital Decoder
• Audio CD or VIDEO CD
Play the disc as you normally would, with the audio mode set to “L+R” (see
page 81). With a digital connection, audio of a disc recorded with DTS
sounds abnormal in this case.
page 81). With a digital connection, audio of a disc recorded with DTS
sounds abnormal in this case.
• DVD Video Disc
The digital connection illustrated above shows connection to audio equipment
that is not equipped with a decoder. Because of this, it cannot produce any
sound when playing a DVD whose audio track is recorded in Dolby Digital (5.1
channel), Dolby Surround (Pro Logic), DTS or MPEG Audio. To play the audio on
such a DVD, you must configure a digital connection with an audio processor or
amplifier equipped with a decoder for the type of audio on the DVD you are
attempting to play. (See page 27.) If you do not have an audio processor or
amplifier equipped with the proper decoder, use a 2-channel analogue (Down
Mix) connection. (See pages 24 and 49.) Note that discs recorded with linear
PCM audio should play normally using the digital connection illustrated above.
that is not equipped with a decoder. Because of this, it cannot produce any
sound when playing a DVD whose audio track is recorded in Dolby Digital (5.1
channel), Dolby Surround (Pro Logic), DTS or MPEG Audio. To play the audio on
such a DVD, you must configure a digital connection with an audio processor or
amplifier equipped with a decoder for the type of audio on the DVD you are
attempting to play. (See page 27.) If you do not have an audio processor or
amplifier equipped with the proper decoder, use a 2-channel analogue (Down
Mix) connection. (See pages 24 and 49.) Note that discs recorded with linear
PCM audio should play normally using the digital connection illustrated above.
Digital Connection to an MD to Record a CD
When you are using a digital connection to record the contents of a CD to
an MD, the track numbers of the CD may not match the track numbers
recorded to the MD.
an MD, the track numbers of the CD may not match the track numbers
recorded to the MD.
GB
26
SETTING UP
Connecting to Audio Equipment
Playing Dolby Digital (5.1 channel), DTS and MPEG audio
■ Analogue Connection
• This Player is equipped with the Dolby Digital (5.1ch)/ Dolby Surround (Pro
• This Player is equipped with the Dolby Digital (5.1ch)/ Dolby Surround (Pro
Logic)/MPEG Audio decoder as standard. Connecting an amplifier with
5.1ch input jacks to your Player provides richer, more powerful surround
sound.
5.1ch input jacks to your Player provides richer, more powerful surround
sound.
After making the above connection
1
Set the “SPEAKER” in “SPEAKER SETUP” to “5ch” or “5.1ch”. (See page
56.)
56.)
2
Set the “DELAY” in “SPEAKER SETUP” according to your speaker
position. (See page 58.)
position. (See page 58.)
VIDEO
IN/OUT
AUDIO(L/R)
AUDIO OUT
PHONES
SURROUND
C/SW
DIGITAL OUT(OPTICAL)
FL
FR
SL
SR
C
SW
5.1ch INPUT
AUDIO (L/R)
To AUDIO
(FRONT)
input jack
(FRONT)
input jack
AUDIO OUT
(SURROUND)
(SURROUND)
To AUDIO
(SURROUND)
input jack
(SURROUND)
input jack
AUDIO OUT
(C/SW)
(C/SW)
To AUDIO
(CENTRE/
SUBWOOFER)
input jack
(CENTRE/
SUBWOOFER)
input jack
Audio cable
(commercially
available)
(commercially
available)
Audio cable
(commercially
available)
(commercially
available)
Audio cable
(supplied)
Amplifier or processor
with 5.1ch input jacks
with 5.1ch input jacks
(White)
(Red)
(White)
(Red)
(White)
(Red)
Jack and Plug Colours
AUDIO (L/R) IN/OUT: Left: White
Right: Red
AUDIO OUT (SURROUND): Left: White
Right: Red
AUDIO OUT(C/SW): Centre: White
Subwoofer: Red
27
GB
SETTING UP
Connecting to Audio Equipment
• This Player cannot be connected to an amplifier or processor that does not have
5.1ch input jacks.
• With an analogue connection, audio cannot be produced from a DVD recorded
with DTS, so you should use an optical digital connection to play such discs.
• Refer to the operation manual for the processor or amplifier for information about
connecting to it.
■ Digital Connection
• Connecting an amplifier with a Dolby Digital/DTS/MPEG Audio digital surround
• Connecting an amplifier with a Dolby Digital/DTS/MPEG Audio digital surround
processor or a Dolby Digital/DTS/MPEG Audio digital surround decoder to
your Player’s optical digital jack provides richer, more powerful audio play.
your Player’s optical digital jack provides richer, more powerful audio play.
• To use DTS digital surround, use the Disc Menu screen (page 96) or the
Function control screen (page 74) to select DTS audio.
After making the above connection
1
Set the “SPEAKER” in “SPEAKER SETUP” to “2ch” (see page 56).
2
Set the “
DIGITAL” in “AUDIO SETUP” to “BITSTREAM” (see page 49).
• You need to purchase a commercially available optical digital cable to make the
connection described above.
• To play a disc recorded with DTS, you need to use DTS processor or amplifier.
• This connection is not possible if the processor or amplifier to which you want to
connect does not have an optical digital input jack.
• Refer to the operation manual for the processor or amplifier for information about
connecting to it.
VIDEO
IN/OUT
AUDIO(L/R)
AUDIO OUT
PHONES
SURROUND
C/SW
DIGITAL OUT(OPTICAL)
DIGITAL IN
OPTICAL
COAXIAL
Optical digital cable
(commercially available)
(commercially available)
To optical
digital
input jack
digital
input jack
Dolby Digital (5.1ch)/
DTS/MPEG Audio
processor or amplifier
DTS/MPEG Audio
processor or amplifier
DIGITAL OUT (OPTICAL)
Click on the first or last page to see other DV-L80 (serv.man18) service manuals if exist.