DOWNLOAD Sharp DV-L70 (serv.man27) Service Manual ↓ Size: 1.67 MB | Pages: 99 in PDF or view online for FREE

The following describes how to charge the battery pack sold separately (BT-
L100 (S)/BT-L100 (BL)) and use it to power the DVD player.

Use the AC adapter that comes with the DVD player to charge the battery pack.

Plug the AC cord into the power socket
of the AC adapter (

1

).

• Push the cord into the AC adapter as far

as it can go.

Plug the other end of the AC cord into a
household power outlet (

2

).

Plug the DC cable into the battery pack (

3

).

• Make sure the main power switch of the DVD video player is in the “OFF”

position before attaching or detaching the AC adapter.

• A battery pack that is attached to the DVD player does not charge while the

player is turned on. Turn power off in order to charge the battery pack.

• Before storing a battery pack, first fully discharge it by using it to power DVD

player operation. At least every six months, charge a stored battery pack and
use it to power the DVD player.

• The battery pack becomes warm when charging. This is normal and does not

indicate abnormality.

• If the charge lamp flashes red or does not light when charging, it could mean the

battery pack is faulty. See “Troubleshooting” on page 88.

• The charge time noted here is the time required to bring a fully depleted

battery pack to full charge.

• Cold conditions and the condition of the battery pack may cause the

required charge time to be longer.

Charge Lamp
The charge lamp is red while charging
is in progress, and turns green when
the battery pack is fully charged.

For 

the U.K.

and Eire

1

2

3

2

Be sure to charge a battery pack before using it.

Make sure the DVD player’s main power switch is in the “OFF” position.

Align the battery guide 

"

 with the 

'

mark (

1

) on the battery pack.

Slide the DVD player in the
direction indicated by the arrow (

2

).

Plug the battery pack’s DC cable into the
DC input jack of the DVD player.

• To prevent mis-operation while attaching or removing the battery pack, make

sure the main power switch of the DVD player is in the “OFF” position.

• Make sure that the battery pack is positioned correctly when you attach it to

the DVD player. Positioning it wrong can cause malfunction.

• Remove the battery pack from the DVD player when you are through using it.

• The battery pack becomes warm during use. This is normal and does not

indicate malfunction.

Using the AC Adapter with the Battery Pack
• A safety feature automatically turns off DVD player power if you set the volume

level too high while playing certain types of discs. If this happens, lower the
volume level and restart play.

• You can charge the battery pack while it is attached to the DVD player by

connecting the AC adapter to the DVD player and turning off DVD player power.

•

Battery
guide

1

2

• The DVD continuous play time is a reference value indicating maximum play

time with low display brightness at 20

°

C.

• Play time may be shorter due to disc type, temperature, battery condition,

and speaker volume.

Make sure the DVD player’s main power switch is in the “OFF” position.

Unplug the DC cable. While holding down the battery release button, slide
the DVD player in the direction indicated by the arrow.

Lift the DVD player in the direction indicated by the arrow.

• Never remove the battery pack while a playback operation is in progress.

DVD continuous play time
(Using speakers)

Approximately 3 hours

Battery release button

• The battery capacity indicator appears only while the display mode is “AUTO”

or “ON”. With “AUTO”, the indicator appears for a short while and then
disappears.

• Battery condition, temperature, and operational conditions affect the

remaining capacity of a battery. Because of this the battery capacity
indicator is intended to be for reference purposes only.

• Regardless of the display mode, the low battery warning appears on the

display whenever the battery is about to go dead.

• The low battery warning does not appear when the display panel is closed.

When the power/standby lamp goes out, replace the battery pack with a
charged one or switch to AC adapter power.

• After the low battery warning appears, the DVD player shuts down. When this

happens, replace the battery pack with a charged one or switch to AC adapter
power.

When battery power is low, power may suddenly turn off when you change
to another operation mode (DVD, INPUT, etc.). When this happens, replace
the battery pack with a charged one or switch to AC adapter power.

➜

➜

Full charge

Flashing

Low