DOWNLOAD Sharp DV-L70 (serv.man27) Service Manual ↓ Size: 1.67 MB | Pages: 99 in PDF or view online for FREE

1. You cannot play illegally produced discs.
• You cannot play discs of other region number than No. 2 (refer to the list

of region number 2 on page 13), such as discs for the use in U.S.A.
(region No. 1) and China (region No. 6).

2. You cannot play scratched discs.
3. You cannot play discs that are dusty, soiled or marked with fingerprints.
• If the playing surface of a disc is soiled or scratched, the player may

display indicator 

 on the screen and fail to play the disc correctly.

(Refer to the instructions on page 7 and clean discs before attempting to
play them.)
While a disc is playing, soiling or scratches on the disc may disrupt the
image (appearing as blocks on the screen). When the image is disrupted,
the player automatically restores the correct image after 2 or 3 seconds. If
the normal screen does not reappear, press the 

 button on the

remote control. This will bring up the normal screen again.

1. English
2. Chinese

1. English
2. Chinese

Number of recorded
audio tracks

Type of subtitles
recorded

Screen
aspect ratio
recorded

Region code
indicator
(see page 12)

Disc with
multiple
camera
angles

• DVDs are divided into “titles” and “chapters”. If the disc has more than one

movie on it, each movie would be a separate “title”. “chapters”, on the other
hand, are subdivisions of titles.

• Video CDs and audio CDs are divided into “tracks”. You can think of a

“track” as one tune on an audio CD.

• Numbers identify each title, chapter, and track on a disc. Most discs have these

numbers recorded on them, but some do not.

Title 1

Title 2

Chapter 1

Chapter 2

Chapter 3

Chapter 1

Chapter 2

Track 1

Track 2

Track 3

Track 4

Track 5

• The DVD player can play back discs recorded by NTSC using the modified

PAL system, such as Video CD, DVD-region 2, but cannot play back discs
for the use in U.S.A. (region No. 1).

• Region numbers cannot be changed in this system.

• This DVD player also has a built-in system converter which makes it possible

to view discs (Video CD, DVD-region 2) recorded by the NTSC system using
a PAL TV. (See “NTSC disc playback on a PAL TV” below.)

or

PAL

NTSC

Signal is converted from NTSC system
type to modified PAL system type.

PAL TV

Multi System TV

PAL signal
Modified PAL signal
NTSC signal

(

)

PUSH TO

CLOSE

ON/STANDBY

PAL/modified PAL image is
displayed on the LCD screen.

When playing an NTSC disc using a PAL TV, please note
the following:
• The picture will shrink vertically to some degree, as

shown in the diagram, but this does not indicate a
malfunction in your TV or DVD player.

• If your TV does not have a V-HOLD control, the picture

may roll and be unwatchable. However, if you use a TV
with V-HOLD control, you can stop the rolling by adjusting the V-HOLD
control and watch the picture.

This Quick Start Guide provides only the most basic information for operating
your DVD player. See the other sections of this Operation Manual for full details
about operational procedures, precautions, and other information.
• Connections and initial settings ... on pages 29 to 50
• To play a disc ............................... on pages 57 to 82
• To view images from a video deck or other external equipment

..................................................... on page 83

Correctly load two batteries into the remote control unit that comes with the
DVD player.

Press the display panel release.

Open the display panel.

While pressing down
at the point indicated
by the 

"

 mark, slide

the battery cover
from the remote
control unit.

Load the batteries.

Slide the battery
cover back into
place.

Load the two (R6 UM/
SUM-3 or AA) batteries
that come with the DVD
player, making sure their

 and 

 ends are

facing as indicated by
the markings inside the
battery compartment.

Press
here.