DOWNLOAD Sony PCM-M1 (serv.man2) Service Manual ↓ Size: 3.65 MB | Pages: 44 in PDF or view online for FREE

Model Name Using Similar Mechanism

TCD-D100

Tape Transport Mechanism Type

MT-D100-128

t

w

AEP Model

US Model

Tape

Digital audio tape

Recording time

Standard: 120minutes
Long-play mode: 240minutes (with DT-120)

Sampling frequency

48kHz, 44.1kHz, 32kHz

Quantization

Standard: 16-bit linear
Long-play mode: 12-bit non linear

Frequency response

Standard: Fs 48kHz 20-22,000Hz (

±

1.0dB) (LINE IN)

Fs 44.1kHz 20-20,000Hz (

±

1.0dB) (LINE IN)

Fs 32kHz 20-14,500Hz (

±

1.0dB) (LINE IN)

Long-play mode: Fs32kHz 20-14,500Hz (

±

1.0dB) (LINE

IN)

Signal to noise ratio

Standard: more than 87dB
Long-play mode: more than 87dB
(1kHz IHF-A, LINE IN)

Dynamic range

Standard: more than 87dB
(1kHz IHF-A, LINE IN)

Total harmonic distortion

Standard: less than 0.008% (1kHz, 22kHz LPF, LINE IN)
Long-play mode: less than 0.09% (1kHz, 22kHz LPF,
LINE IN)

Wow and flutter

Below measurable limit (less than 

±

0.001% W.PEAK)

Input

Output

Input/Output

DIGITAL • REMOTE I/O jack (special jack)

Jack type

stereo minijack

Impedance

MIC 4.7k

Ω

LINE IN 47k

Ω

Rated input level

MIC 1.4mV

LINE IN 500mV

Minimum input level

MIC 0.3mV

LINE IN 120mV

MIC/

LINE IN

Jack type

stereo

minijack

Impedance

220

Ω

16

Ω

Rated output

500mV

87mV

Minimum output level

–

15mW+15mW

LINE OUT

REMOTE /

2

Load impedance

10k

Ω

16

Ω

Digital input/ output, remote control operation and
timer-activated operation is possible by connection
with an adaptor kit to this jack.

Power requirements

• Two R6 (size AA) alkaline batteries (not supplied)
• Two nickel metal hydride rechargeable battery

(Supplied)
DC IN 4.5V jack accepts:

the Sony AC power adaptor AC-E45HG
(Supplied)
the car battery cord DCC-E245 (not supplied)
for use with 12V/24V car battery.

Battery life

See “Replacing the batteries” (page 11).

Power consumption

0.9W

Dimension

Approx. 80

×

117.3

×

29.2mm (31/4 

×

 45/8 

×

 13/16 in)

(w/h/d) not incl. projecting parts and controls

Mass

Main unit: Approx. 290g (10.3oz)
When using the main unit: Approx. 395g (14oz.)

incl.headphones with remote control, rechargeable
batteries and a cassette

Supplied accessories

• AC power adaptor (1)
• Charger adaptor (1)
• Nickel Metal Hydride Rechargeable battery NH-D100 (2)
• Headphones with a remote control (1)
• DAT cleaning cassette (1)
• Microphone plug adaptor (monaural phone jack 

×

 2

→

 stereo miniplug) (1)*

• Optical cable (special jack 

↔ 

rectangular-shaped optical input/output) (1)*

• Battery carrying case (1)
• Carrying case (1)
* Supplied only to the European model.
Design and specifications are subject to change without notice.

2007C16-1
© 2007.03

— 2 —

································································

3

2-1.

PANEL ASSY, LOWER ··················································· 14

2-2.

MAIN BOARD ································································ 14

2-3.

LID ASSY, CASSETTE ··················································· 15

2-4.

PC BOARD UNIT, SYSTEM CONTROL ······················ 15

2-5.

CABINET ········································································· 16

2-6.

BRACKET ASSY, MD ···················································· 16

2-7.

CHASSIS ASSY ······························································· 17

2-8.

DRUM ASSY ··································································· 17

3-1.

ADJUSTMENTS ······························································ 18

3-2.

MECHANICAL ADJUSTMENTS ·································· 23

3-3.

ELECTRICAL ADJUSTMENTS ···································· 24

4-1.

BLOCK DIAGRAM – MD SECTION — ······················· 26

4-2.

BLOCK DIAGRAM – AUDIO SECTION — ················· 29

4-3.

IC BLOCK DIAGRAM ··················································· 31

4-4.

PRINTED WIRING BOARD ·········································· 34

4-5.

SCHEMATIC DIAGRAM —MAIN SECTION — ········· 39

4-6.

SCHEMATIC DIAGRAM —AUDIO SECTION — ······ 42

4-7.

IC PIN FUNCTION ························································· 45

5-1.

CABINET SECTION ······················································· 49

5-2.

CASSETTE HOLDER SECTION ··································· 50

5-3.

MACHANISM SECTION 1 ············································ 51

5-4.

MACHANISM SECTION 2 ············································ 52

··································· 53

• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be

damaged by heat.

• Keep the temperature of soldering iron around 270˚C

during repairing.

• Do not touch the soldering iron on the same conductor of the

circuit board (within 3 times).

• Be careful not to apply force on the conductor when soldering

or unsoldering.

0

0

— 3 —

This section is extracted
from instruction manual.

— 4 —