DOWNLOAD Sharp DV-HR350H (serv.man5) Service Manual ↓ Size: 1.42 MB | Pages: 36 in PDF or view online for FREE

• This lets you preset the channels into memory. A maximum of 84 channels can be

preset.

• For details, see “Channel Setting” on page 28.

• This lets you obtain sharp colour picture.

• If there have a separate decoder connected to the L2 terminal of the Recorder, set this

function to “ON” in order to record the unscrambled signal and/or watch it on your TV.

• This determines whether the channel can be selected when using CH '

'

'

'

' / "

"

"

"

"  instead of

Number buttons.

1 - 84

ON
OFF

CHXX

ON
OFF

• When your Recorder tunes in broadcast channels automatically, it sorts them into a

standard order using internal information. The “MOVE” function lets you change the
order of the channel.

• This lets you delete a channel from the Recorder memory.

• When your Recorder tunes in broadcast channels automatically, it names them using

the VPS/PDC information. The “NAME” function lets you change the name of the
channel.

*

1

  For details, see page 28.

*

2

  For details, see pages 28, 29.

DV-HR350H/300H-089-100

2004.4.8, 11:08 AM

97

• The clock will normally be set using the VPS/PDC information when your Recorder

automatically tunes in the broadcast channels. If for any reason the VPS/PDC signals
are not present, your Recorder will not be able to set the clock. The “CLOCK” function
lets you set the clock manually.

TIME:XX:XX(24H)
DATE:Day/Month
YEAR:XX
ADJUST:
 

∗:AUTO/-:OFF

• This function should allow the Police to identify you as the owner of the Recorder if it is

stolen. Each time the Recorder is turned on, your postcode will be displayed for 5
seconds. Your postcode cannot be changed or removed without first entering the
correct PIN - number.

0000–9999

*

3

  For details, see page 27.

*

4

  For details, see page 30.

DV-HR350H/300H-089-100

2004.4.8, 11:08 AM

98

• When recording with a DVD-RW in VR mode, initialize in VR mode

before you start recording.
(When you initialize, all of the recorded content of the disc is erased.
Before initializing, check the content of the disc so that you do not
erase any content you need.)

• You cannot initialize if “DVD DISC PROTECTION” is set to

“PROTECT”. (page 93)

• When recording with a DVD-RW disc in Video mode, initialize in Video

mode before you start recording.
(When you initialize, all of the recorded content of the disc is erased.
Before initializing, check the content of the disc so that you do not
erase any content you need.)

• You cannot erase with DVD-R disc.

• This sets the Recorder so it automatically initializes any unused DVD-

RW discs which are loaded into the Recorder.
You can initialize in either VR mode or Video mode.

• If an HDD error message is displayed, or if you wish to return the HDD

to the state it was in when the Recorder was purchased, initialize the
HDD. All recorded video will be erased. (If you use the “ERASE ALL
TITLES” function to erase the titles, protected titles will remain, but if
you use the HDD initializing function, all titles will be erased.)
Dub any important recordings to DVD-RW/R disc(s) before initializing
the HDD.

YES
NO

YES
NO

VR
VIDEO

YES
NO

Before recording to DVD-RW, initialize the disc in VR mode
or Video mode.
You can also initialize the HDD. Initialize the HDD only after
dubbing important recordings onto DVD-RW/R disc(s).

Finalization is done so that a recorded DVD-RW/R disc can
be played back with other recorders.

• Set this when you want to playback a VR mode or Video mode disc

using another recorder capable of playback.
If you finalize a recording on DVD-R disc, you will not be able to
record any more on the disc.

• Finalization can take anywhere from a few minutes to one hour.

During finalization, all types of operation are disabled (including
turning off power and removing the disc).

• Do not unplug the power cord during finalization. Doing so may make

the disc unusable.

• This resets a finalized DVD-RW disc so you can record on it again.

YES
NO

YES
NO

DV-HR350H/300H-089-100

2004.4.8, 11:08 AM

99

Example: Setting “DVD VR MODE INIT.” (VR
mode)

1

1

1

1

1

2

2

2

2

2

Press ' / " / \ / | to select
“INITIALIZE/FINALIZE”, then
press SET/ENTER.

Press ' / "  to select “INITIAL-
IZE” or “FINALIZE”, then press
SET/ENTER.

Press ' / "  to select “DVD VR
MODE INIT.”, then press SET/
ENTER.

REC LIST

TIMER 

PROGRAM/

CHECK

INITIALIZE/

FINALIZE

OTHER

SETTINGS 1

OTHER

SETTINGS 2

EDIT/

ERASE

DUBBING

INFORMATION

INITIALIZES HDD/DVD AND FINALIZES DVD

START MENU[INITIALIZE/FINALIZE]

8

2

:

0

1

2

1

/

5

2

REVERTS DISC TO UNUSED STATE 
(ALL STORED DATA ERASED).

ENABLES PLAYBACK OF RECORDED 
DVD DISC ON OTHER DVD PLAYERS.

INITIALIZE

DVD FINALIZE

INITIALIZE/FINALIZE

SELECT

ENTER

RETURN

ENTER

n

8

2

:

0

1

2

1

/

5

2

INITIALIZE

YES

NO

DVD VR MODE INIT.

DVD VIDEO MODE INIT.
AUTO INITIALIZE
HDD INITIALIZE

ENTER

RETURN

ENTER

n

8

2

:

0

1

2

1

/

5

2

AFTER RECORDING, IT IS POSSIBLE TO
USE A VARIETY OF EDITING FUNCTIONS
TO CUSTOMIZE YOUR VIDEO.

INITIALIZE DVD?

SELECT

8

2

:

0

1

2

1

/

5

2

INITIALIZE

INITIALIZE

8

2

:

0

1

2

1

/

5

2

DVD VR MODE INIT.

DVD VIDEO MODE INIT.
AUTO INITIALIZE
HDD INITIALIZE

INITIALIZING...

INITIALIZING COMPLETED.

DVD VR MODE INIT.

DVD VIDEO MODE INIT.
AUTO INITIALIZE
HDD INITIALIZE

ENTER

ENTER

OK

1

1

1

1

1

Press \ / | to select “YES”,
then press SET/ENTER.

• Initializing (or finalizing) will be

executed.

• Initializing (or finalizing) will be

completed.

2

2

2

2

2

• Screen in step 2 appears.

• Finalization processing will take anywhere

from a few minutes to about an hour.
(Processing will take time if there is a lot of
empty space or if there are many titles on
the DVD disc.)

DV-HR350H/300H-089-100

04.4.25, 3:45 PM

100