Sharp XL-UR27H User Manual / Operation Manual ▷ View online
33
XL-UR27H
2008/July/18
XL-UR27H_UK&AUS
Advanced Features
Continued to the next page
4
Within 10 seconds, press the
or
button to select
“ON” or “SET”, and press the MEMORY button.
5
Press the
or
button to select “PLAY” or “REC”, and
press the MEMORY button.
The illustrations show the daily timer setting.
6
Press the
or
button to adjust the hour and then
press the MEMORY button.
The illustrations show the timer playback setting in the daily
timer mode.
timer mode.
7
Press the
or
button to adjust the minutes and then
press the MEMORY button.
8
Set the time to finish as in steps 5 and 6 above.
9
Switch input with the
or
button, and then press the
MEMORY button.
To select the timer playback source: CD/ TUNER/ USB or
AUDIO IN.
AUDIO IN.
To select the timer record source: Only at TUNER.
When you select the tuner, select a station by pressing the
or
button, and then press the MEMORY button.
If a station has not been programmed, “NO P-SET” will be
displayed and timer setting will be cancelled.
displayed and timer setting will be cancelled.
10
Adjust the volume using the VOLUME control, and then
press the MEMORY button.
press the MEMORY button.
Do not turn the volume up too high.
11
Press the ON/STAND-BY button to enter the power stand-
by mode.
by mode.
The “TIMER” indicator lights up and the unit is ready for timer
playback.
playback.
XL-UR27
34
XL-UR27H
2008/July/18
XL-UR27H_UK&AUS
Advanced Features
Timer and sleep operation (Remote Control only) (continued)
Notes:
Checking the timer setting in the timer stand-by mode:
Cancelling the timer setting in the timer stand-by mode:
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To reuse the
same setting, perform the following operations.
The timer setting will be memorised once it is entered. To reuse the
same setting, perform the following operations.
12
When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the preset
volume.
volume.
13
When the timer end time is reached, the system will enter
the power stand-by mode automatically.
Once timer:
The timer will be cancelled.
The “r” indicator will blinking during timer playback.
The “r” indicator will blinking during timer playback.
Daily timer:
The timer will operate at the same time every day. It will
continue until the daily timer setting is cancelled. Cancel the
daily timer when it is not in use.
The “r DAILY” indicator will blinking during timer playback.
continue until the daily timer setting is cancelled. Cancel the
daily timer when it is not in use.
The “r DAILY” indicator will blinking during timer playback.
When performing timer playback using another unit connected
to the USB terminal or AUDIO IN sockets, select “USB” or
“AUDIO IN” in step 9.
This unit will turn on or enter the power stand-by mode
automatically. However, the connected unit to AUDIO IN sockets
will not turn on or off.
To stop the blinking, follow step “Cancelling the timer setting
in the timer stand-by mode” on the right hand side of this
page.
to the USB terminal or AUDIO IN sockets, select “USB” or
“AUDIO IN” in step 9.
This unit will turn on or enter the power stand-by mode
automatically. However, the connected unit to AUDIO IN sockets
will not turn on or off.
To stop the blinking, follow step “Cancelling the timer setting
in the timer stand-by mode” on the right hand side of this
page.
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
2 Within 10 seconds, press the
or
button to select “ONCE”
or “DAILY”, and press the MEMORY button.
3 Within 10 seconds, press the
or
button to select “CALL”,
and press the MEMORY button.
The unit returns to the timer stand-by mode after displaying the
settings in order.
The unit returns to the timer stand-by mode after displaying the
settings in order.
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
2 Within 10 seconds, press the
or
button to select “ONCE”
or “DAILY”, and press the MEMORY button.
3 Within 10 seconds, press the
or
button to select “OFF”,
and press the MEMORY button.
Timer will be cancelled (the setting will not be cancelled).
Timer will be cancelled (the setting will not be cancelled).
1 Turn the power on and press the CLOCK/TIMER button.
2 Within 10 seconds, press the
2 Within 10 seconds, press the
or
button to select “ONCE”
or “DAILY”, and press the MEMORY button.
3 Within 10 seconds, press the
or
button to select “ON”, and
press the MEMORY button.
4 Press the ON/STAND-BY button to enter the power stand-by
mode.
35
XL-UR27H
2008/July/18
XL-UR27H_UK&AUS
Advanced Features
Sleep operation
The radio, compact disc, USB and AUDIO IN can all be turned off
automatically.
automatically.
To confirm the remaining sleep time:
To cancel the sleep operation:
Press the ON/STAND-BY button whilst “SLEEP” is indicated.
Press the ON/STAND-BY button whilst “SLEEP” is indicated.
To cancel the sleep operation without setting the unit to the
stand-by mode, proceed as follows:
stand-by mode, proceed as follows:
To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
1
Play back the desired sound source.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the
or
button to select
“SLP”, and press the MEMORY
button.
button.
4
Press the
or
button to select the time.
(Maximum: 3 hours - Minimum: 1 minute)
3 hours - 5 minutes 5-minute intervals
5 minutes - 1 minute 1-minute intervals
5
Press the MEMORY button.
“SLEEP” will appear.
6
The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep
operation finishes.
operation finishes.
1
Whilst “SLEEP” is indicated, press the CLOCK/TIMER button.
2
Within 10 seconds, press the
or
button to select
“SLP X : XX”.
“X : XX” is sleep remaining time.
“X : XX” is sleep remaining time.
The remaining sleep time is displayed for about 10 seconds.
You can change the remaining sleep time whilst it is displayed by
pressing the MEMORY button (steps 4 - 5).
You can change the remaining sleep time whilst it is displayed by
pressing the MEMORY button (steps 4 - 5).
1
Whilst “SLEEP” is indicated, press the CLOCK/TIMER button.
2
Within 10 seconds, press the
or
button to select “SLP
OFF”, and press the MEMORY button.
1
Set the sleep time (see left, steps 1 - 5).
2
Whilst the sleep timer is set, set the timer playback (steps 2 -
10, pages 32 - 33).
10, pages 32 - 33).
Timer playback start time
Sleep operation will
automatically stop
automatically stop
Timer playback setting
Sleep timer setting
End time
Desired time
1 minute - 3 hours
36
XL-UR27H
2008/July/18
XL-UR27H_UK&AUS
Advanced Features
Enhancing your system
The connection lead is not included. Purchase a commercially
available lead as shown below.
available lead as shown below.
Auto power on function:
When you press any of the following buttons, the unit turns on.
When you press any of the following buttons, the unit turns on.
AUDIO IN button (remote control): The unit turns on and the
“AUDIO IN” function is activated.
“AUDIO IN” function is activated.
/ or FUNCTION button on the main unit: The unit turns on and
playback of the last function starts (CD, TUNER, USB, AUDIO IN).
Listening to the playback sounds of portable
audio player, etc.
audio player, etc.
Note:
To prevent noise interference, place the unit away from the
television.
To prevent noise interference, place the unit away from the
television.
Headphones
Do not turn the volume on to full at switch on. Listen to music at
moderate levels. Excessive sound pressure from earphones and
headphones can cause hearing loss.
Before plugging in or unplugging the headphones, reduce the
volume.
Be sure your headphones have a 3.5 mm (1/8") diameter plug
and impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
Plugging in the headphones disconnects the speakers
automatically. Adjust the volume using the VOLUME control.
moderate levels. Excessive sound pressure from earphones and
headphones can cause hearing loss.
Before plugging in or unplugging the headphones, reduce the
volume.
Be sure your headphones have a 3.5 mm (1/8") diameter plug
and impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
Plugging in the headphones disconnects the speakers
automatically. Adjust the volume using the VOLUME control.
XL-UR27
Portable audio player, etc.
Audio cable
(not supplied)
1
Use a connection lead to connect the portable audio player
etc. to the AUDIO IN socket.
When using video equipment, connect the audio output to this
unit and the video output to a television.
etc. to the AUDIO IN socket.
When using video equipment, connect the audio output to this
unit and the video output to a television.
2
Press the ON/STAND-BY button to turn the power on.
3
Press the AUDIO IN button.
4
Play the connected equipment.
If volume level of the connected device is too high, sound
distortion may occur. Should this happen, lower the volume of
the connected device.
If volume level is too low, increase the volume of the connected
device.
distortion may occur. Should this happen, lower the volume of
the connected device.
If volume level is too low, increase the volume of the connected
device.
Click on the first or last page to see other XL-UR27H service manuals if exist.