Sharp XL-UR27H User Manual / Operation Manual ▷ View online
25
XL-UR27H
2008/July/18
XL-UR27H_UK&AUS
Radio
Listening to the radio
Auto power on function:
When you press any of the following buttons, the unit turns on.
When you press any of the following buttons, the unit turns on.
TUNER button (remote control): The unit turns on and the
“TUNER” function is activated.
“TUNER” function is activated.
/ or FUNCTION button on the main unit: The unit turns on and
playback of the last function starts (CD, TUNER, USB, AUDIO IN).
Note:
This product can receive FM stereo and FM monaural broadcasts.
This product can receive FM stereo and FM monaural broadcasts.
Tuning
Notes:
When radio interference occurs, auto scan tuning may stop
automatically at that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING ( or
automatically at that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING ( or
) button again.
When an RDS (Radio Data System) station is tuned in, the
frequency will be displayed first, and then the RDS indicator will
light up. Finally, the station name will appear.
Full auto tuning can be achieved for RDS stations “ASPM”, see
page 28.
frequency will be displayed first, and then the RDS indicator will
light up. Finally, the station name will appear.
Full auto tuning can be achieved for RDS stations “ASPM”, see
page 28.
To receive FM stereo transmission:
Press the TUNER button to select stereo mode and “ST” indicator
will be displayed.
Press the TUNER button to select stereo mode and “ST” indicator
will be displayed.
“ ” will appear when an FM broadcast is in stereo.
If the FM reception is weak, press the TUNER button to extinguish
the “ST” indicator. The reception changes to monaural, and the
sound becomes clearer.
If the FM reception is weak, press the TUNER button to extinguish
the “ST” indicator. The reception changes to monaural, and the
sound becomes clearer.
XL-UR27
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER button on the remote control or
FUNCTION button repeatedly on the main unit to select
FUNCTION button repeatedly on the main unit to select
tuner function.
3
Press the TUNING ( or ) button on the remote control to
tune in to the desired station.
tune in to the desired station.
Manual tuning:
Press the TUNING ( or
Press the TUNING ( or
) button as many times as required
to tune in to the desired station.
Auto tuning:
When the TUNING ( or
Auto tuning:
When the TUNING ( or
) button is pressed for more than 0.5
seconds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.
FM stereo mode indicator
FM stereo receiving indicator
26
XL-UR27H
2008/July/18
XL-UR27H_UK&AUS
Radio
Listening to the radio (continued)
Memorising a station
Up to 40 stations for FM band can be stored and recalled at the push
of a button (PRESET (
of a button (PRESET (
or )).
Note:
The backup function protects the memorised stations for a few
hours should there be a power failure or the AC power lead become
disconnected.
The backup function protects the memorised stations for a few
hours should there be a power failure or the AC power lead become
disconnected.
To recall a memorised station
To scan the preset stations
The stations saved in memory can be scanned automatically.
(Preset memory scan)
(Preset memory scan)
To erase entire preset memory
1
Perform steps 1 - 3 in “Tuning” on page 25.
2
Press the MEMORY button to enter the preset tuning
saving mode.
saving mode.
3
Within 30 seconds, press the PRESET ( or ) button to
select the preset channel number.
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
channel 1.
4
Within 30 seconds, press the MEMORY button to store that
station in memory.
station in memory.
If the “MEMORY” and preset number indicators disappear
before the station is memorised, repeat the operation from step
2.
before the station is memorised, repeat the operation from step
2.
5
Repeat steps 1 - 4 to set other stations, or to change a
preset station.
preset station.
When a new station is stored in memory, the station previously
memorised for that preset channel number will be erased.
memorised for that preset channel number will be erased.
Press the PRESET (
or ) button for less than 0.5 seconds to
select the desired station.
1
Press the PRESET (
or ) button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
tuned in sequentially, for 5 seconds each.
2
Press the PRESET (
or ) button again when the desired
station is located.
1
Press the CLEAR/DIMMER button. “TUN CLR” will appears.
2
Press the MEMORY button to erase entire preset memory.
27
XL-UR27H
2008/July/18
XL-UR27H_UK&AUS
Advanced Features
Using the Radio Data System (RDS)
RDS is a broadcasting service which a growing number of FM
stations provide. These FM stations send additional signals
along with their regular programme signals. They send their
station names, and information about the type of programme
such as sport, music, etc.
When tuned to an RDS station, “RDS” and the station name will be
displayed.
“TP” (Traffic Programme) will appear on the display when the
received broadcast carries traffic information, and “TA” (Traffic
Announcement) will appear whilst a traffic information is on air.
“PTYI” (Dynamic PTY Indicator) will appear whilst the Dynamic PTY
station is received.
stations provide. These FM stations send additional signals
along with their regular programme signals. They send their
station names, and information about the type of programme
such as sport, music, etc.
When tuned to an RDS station, “RDS” and the station name will be
displayed.
“TP” (Traffic Programme) will appear on the display when the
received broadcast carries traffic information, and “TA” (Traffic
Announcement) will appear whilst a traffic information is on air.
“PTYI” (Dynamic PTY Indicator) will appear whilst the Dynamic PTY
station is received.
You can control the RDS by using the buttons on the remote
control only.
Information provided by RDS
Each time the RDS DISPLAY button is pressed, the display will
switch as follows:
switch as follows:
When tuning in to a station other than an RDS station or to an RDS
station which sends weak signal, the display will change in the
following order:
station which sends weak signal, the display will change in the
following order:
Station name (PS)
Programme type (PTY)
Frequency
Radio text (RT)
NO PS
NO PTY
FM 98.80 MHz
NO RT
28
XL-UR27H
2008/July/18
XL-UR27H_UK&AUS
Advanced Features
Using the Radio Data System (RDS) (continued)
Using the Auto Station Programme Memory
(ASPM)
(ASPM)
Whilst in the ASPM operation mode, the tuner will automatically
search for new RDS stations. Up to 40 stations can be stored.
If you have already stored some stations in memory, the number of
new stations you can store will be less.
search for new RDS stations. Up to 40 stations can be stored.
If you have already stored some stations in memory, the number of
new stations you can store will be less.
To stop the ASPM operation before it is complete:
Press the RDS ASPM button whilst it is scanning for stations.
The stations which are already stored in memory will be kept there.
Press the RDS ASPM button whilst it is scanning for stations.
The stations which are already stored in memory will be kept there.
Notes:
If the same station is broadcasting on different frequencies, the
strongest frequency will be stored in memory.
Any station which has the same frequency as the one stored in
memory will not be stored.
If 40 stations have already been stored in memory, the scan will
be aborted. If you want to redo the ASPM operation, erase the
preset memory.
If no station have been stored in memory, “END” will appear for
about 4 seconds.
If the RDS signals are very weak, station names may not be
stored in memory.
The same station name can be stored in different channels.
In a certain area or during certain time periods, the station names
may temporarily be different.
strongest frequency will be stored in memory.
Any station which has the same frequency as the one stored in
memory will not be stored.
If 40 stations have already been stored in memory, the scan will
be aborted. If you want to redo the ASPM operation, erase the
preset memory.
If no station have been stored in memory, “END” will appear for
about 4 seconds.
If the RDS signals are very weak, station names may not be
stored in memory.
The same station name can be stored in different channels.
In a certain area or during certain time periods, the station names
may temporarily be different.
1
Press the TUNER button on the remote control or
FUNCTION button repeatedly on the main unit to select
TUNER function.
FUNCTION button repeatedly on the main unit to select
TUNER function.
2
Press and hold down the RDS ASPM button on the remote
control for at least 3 seconds.
control for at least 3 seconds.
1
After “ASPM” has flashed for about 4 seconds, scanning will
start (87.50 - 108.00 MHz).
start (87.50 - 108.00 MHz).
2
When an RDS station is found, “RDS” will appear for a short
time and the station will be stored in memory.
time and the station will be stored in memory.
3
After scanning, the number of stations stored in memory will
be displayed for 4 seconds, and then “END” will appear for
4 seconds.
be displayed for 4 seconds, and then “END” will appear for
4 seconds.
Click on the first or last page to see other XL-UR27H service manuals if exist.