Sharp XL-HF401PH (serv.man3) User Manual / Operation Manual ▷ View online
12/3/30
HF-401PH_OM_EN_UK.fm
8
General control (continued)
The volume is muted temporarily when pressing the
(MUTE) button on the remote control. Press again to
restore the volume.
(MUTE) button on the remote control. Press again to
restore the volume.
When the power is first turned on, the unit will enter the extra
bass mode which emphasises the bass frequencies, and
“X-Bass On” will appear. To cancel the extra bass mode,
press the X-BASS button on the remote control.
bass mode which emphasises the bass frequencies, and
“X-Bass On” will appear. To cancel the extra bass mode,
press the X-BASS button on the remote control.
When the FUNCTION button on main unit is pressed, the
current function will change to different mode. Press the
FUNCTION button repeatedly to select desired function.
current function will change to different mode. Press the
FUNCTION button repeatedly to select desired function.
Note:
The backup function will protect the memorised function
mode for a few hours should there be a power failure or the
AC power lead becomes disconnected.
The backup function will protect the memorised function
mode for a few hours should there be a power failure or the
AC power lead becomes disconnected.
Setting the clock (Remote control only)
In this example, the clock is set for the 24-hour (0:00) display.
Setting the clock (Remote control
only) (continued)
only) (continued)
To confirm the time display:
Press the CLOCK/TIMER button. The time display will
appear for about 5 seconds.
Note:
When power supply is restored after unit is plugged in again or
after a power failure, reset the clock (pages 8).
To readjust the clock:
Perform “Setting the clock” from step 1. If the “Clock” does not
appear in step 2, step 4 (for selecting the 24-hour or 12-hour
display) will be skipped.
Press the CLOCK/TIMER button. The time display will
appear for about 5 seconds.
Note:
When power supply is restored after unit is plugged in again or
after a power failure, reset the clock (pages 8).
To readjust the clock:
Perform “Setting the clock” from step 1. If the “Clock” does not
appear in step 2, step 4 (for selecting the 24-hour or 12-hour
display) will be skipped.
To change the 24-hour or 12-hour display:
Wi-Fi network Setup for AirPlay / DLNA
(AirPlay)
With Apple AirPlay technology, you can stream your music
from your iTunes on a Mac, PC, iPod touch, iPhone, or iPad
to external speakers (XL-HF401PH) via a Wi-Fi network.
With Apple AirPlay technology, you can stream your music
from your iTunes on a Mac, PC, iPod touch, iPhone, or iPad
to external speakers (XL-HF401PH) via a Wi-Fi network.
AirPlay usage requires:
● MacBook or MacBook Pro running MacOS 10.6.6 or
greater.
● iTunes 10.2 or greater (Mac/PC).
● iOS 4.3 or later
- iPod touch (4th, 3rd and 2nd generation)
- iPhone 4S
- iPhone 4
- iPhone 3GS (iPhone 3G cannot support AirPlay)
- iPad 2
- iPad
- iPhone 4S
- iPhone 4
- iPhone 3GS (iPhone 3G cannot support AirPlay)
- iPad 2
- iPad
(DLNA)
DLNA technology enables you to share media from one
device to another via a Wi-Fi network.
DLNA usage requires:
DLNA technology enables you to share media from one
device to another via a Wi-Fi network.
DLNA usage requires:
● DLNA compatible devices with appropriate application.
(Refer to your devices’ manual) Support status varies
depending on model and software features such as
client and server functions.
depending on model and software features such as
client and server functions.
● PC with Windows 7. (For details, refer to the Windows
guide.)
● DLNA version 1.5
● This product supports audio source with playback
capability only. Streaming (audio and video) from
DLNA devices is not supported by this product.
DLNA devices is not supported by this product.
● DRM file playback (DTCP-IP) is not supported.
● SHARP does not guarantee that this product will work
with all DLNA compatible devices and wireless LAN
routers.
routers.
■ Muting
■ X-Bass control
■ Bass control
1
Press the BASS/TREBLE
button to select “Bass”.
button to select “Bass”.
2
Within 5 seconds, press
the VOLUME (+ or –)
button to adjust the bass.
the VOLUME (+ or –)
button to adjust the bass.
■ Treble control
1
Press the BASS/TREBLE
button to select “Treble”.
button to select “Treble”.
2
Within 5 seconds, press
the VOLUME (+ or –)
button to adjust the treble.
the VOLUME (+ or –)
button to adjust the treble.
■ Function
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK/TIMER button.
3
Within 5 seconds, press the ENTER button. To adjust
the day, press the
the day, press the
or
button and then press the
ENTER button.
- 5
↔ - 4........↔ + 4 ↔ + 5
- 5
↔ - 4........↔ + 4 ↔ + 5
FM STEREO
FM MONO
iPod
Audio In
Line In
USB
CD
Network
CD/USB
RDS
1
Press the
or
button to select 24-hour or 12-hour
display and then press the ENTER button.
The 24-hour display will appear.
(0:00 - 23:59)
(0:00 - 23:59)
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
(AM 12:00 - PM 11:59)
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
(AM 0:00 - PM 11:59)
5
To adjust the hour, press the
or
button and then press
the ENTER button. Press the
or
button once to
advance the time by 1 hour. Hold it down to advance
continuously.
continuously.
6
To adjust the minutes, press the
or
button and then
press the ENTER button. Press the
or
button once
to advance the time by 1 minute. Hold it down to advance the
time by 5 minutes interval.
time by 5 minutes interval.
1
Clear all the programmed contents. [Refer to “Factory
reset, clearing all memory” on page 25 for details.]
reset, clearing all memory” on page 25 for details.]
2
Perform “Setting the clock” from step 1 onwards.
12/3/30
HF-401PH_OM_EN_UK.fm
9
Wi-Fi network Setup for AirPlay / DLNA (continued)
Note:
When this unit is placed too near a Wireless LAN device or
microwave, noise interference may occur, causing
crackling sound. It may also reduce the communication
speed and cause invalid connection. If these happen, do
the following:
- Place the unit away from the Wireless LAN device or
When this unit is placed too near a Wireless LAN device or
microwave, noise interference may occur, causing
crackling sound. It may also reduce the communication
speed and cause invalid connection. If these happen, do
the following:
- Place the unit away from the Wireless LAN device or
microwave.
- Place the unit closer to the source device.
1
Press the ON/STAND-BY button.
2
Press the NETWORK button.
3
Press the iPod MENU button on the remote control.
4
Press the
/
button to select ‘Wi-Fi Setup’.
Press the ENTER button.
5
Press the
/
button to select ‘Direct’. Press the
ENTER button. Wait until the display shows ‘Direct
Ready’ which take about 40 seconds.
Ready’ which take about 40 seconds.
6
On the iPod touch/iPhone/iPad, select ‘Settings’ -->
‘Wi-Fi’. On the PC/Mac, enter the list of available
wireless networks.
‘Wi-Fi’. On the PC/Mac, enter the list of available
wireless networks.
For other DLNA compatible devices, turn on the Wi-Fi. For
more details, refer to your devices’ manual.
more details, refer to your devices’ manual.
7
Select SHARP_XL-HF401 from the list of available
networks.
networks.
8
Launch Music and play desired song on your iPod
touch / iPhone or iPad. For PC/Mac, launch iTunes.
For other DLNA compatible devices, launch the DLNA
compatible media software. For more details, refer to
your devices’ manual.
touch / iPhone or iPad. For PC/Mac, launch iTunes.
For other DLNA compatible devices, launch the DLNA
compatible media software. For more details, refer to
your devices’ manual.
9
Tap / click on the AirPlay icon
.
Select the speaker : SHARP_XL-HF401_xxxxxx.
Sound will be heard from the XL-HF401 speakers via
audio streaming.
Sound will be heard from the XL-HF401 speakers via
audio streaming.
For protection purposes, in some conditions, the message
“Press ENTER to start streaming” will appear asking for
your permission to continue streaming.
“Press ENTER to start streaming” will appear asking for
your permission to continue streaming.
● Press ENTER button while the message is still scrolling.
This message appears when / during (provided that the
Direct Wireless Connection has previously been set up):
This message appears when / during (provided that the
Direct Wireless Connection has previously been set up):
● Network Stand-by mode.
● In other functions (CD, TUNER, USB, iPod, Audio In).
● In NETWORK function, when your Apple / DLNA device
stays idle for more than 15 minutes.
Notes:
● When using Direct wireless connection, use a DMS
(Digital Media Server) supported Application. For more
information, refer to www.dlna.org.
information, refer to www.dlna.org.
● Signal interference may occur from surrounding devices
while in Direct wireless connection. This may cause
sound interruption and/or inability to select the speakers.
Should this happen, perform any of the following:
sound interruption and/or inability to select the speakers.
Should this happen, perform any of the following:
1 Switch off the Network Stand-by mode (refer page 6) or
unplug the AC power lead and plug it back in.
2 Switch to other Wi-Fi channel listed in the ‘Direct
connection configuration’ tab of the Configuration
Webpage. To access this webpage, follow steps 6-8
under ‘Connection via SSID (wireless router without
WPS)’ on page 10.
Webpage. To access this webpage, follow steps 6-8
under ‘Connection via SSID (wireless router without
WPS)’ on page 10.
3 “Network clear” operation. Press and hold the CLEAR
button while in Network function until ‘Network Clear’
appears. Repeat steps 1 - 4 in ‘Direct wireless
connection’.
appears. Repeat steps 1 - 4 in ‘Direct wireless
connection’.
4 Place the unit to other position with better reception.
● If router is available, router connection is recommended.
● SHARP does not guarantee that this product will work
(connection and operation) with all the applications.
● This product cannot work as a router. If you want to
connect the internet, a router must be used.
1
Press the WPS button on the wireless router.
2
Press the ON/STAND-BY button.
3
Press the NETWORK button.
4
Press the iPod MENU button on the remote control.
5
Press the
/
button to select ‘Wi-Fi Setup’.
Press the ENTER button.
6
Press the
/
button to select ‘WPS’. Press the ENTER
button. Wait until ‘
’ on the display stop blinking and the
display shows "Successfully Connected to [network
name]".
name]".
7
On the iPod touch/iPhone/iPad, select ‘Settings’ --> ‘Wi-
Fi’. On the PC/Mac, enter the list of available wireless
networks. For other DLNA compatible devices, turn on
the Wi-Fi. For more details, refer to your devices’ manual.
Fi’. On the PC/Mac, enter the list of available wireless
networks. For other DLNA compatible devices, turn on
the Wi-Fi. For more details, refer to your devices’ manual.
8
Select your router from the list of available networks. Enter
your network password if required.
your network password if required.
9
Continue with step 8 to 9 in ‘Direct wireless
connection’ on this page.
connection’ on this page.
Note:
WPS process (network search) takes about 2 minutes. If
fail to connect, the display will show ‘Cannot connect to
Network. Please try again’. Repeat step 4 to retry or do
‘Connection via SSID’.
WPS process (network search) takes about 2 minutes. If
fail to connect, the display will show ‘Cannot connect to
Network. Please try again’. Repeat step 4 to retry or do
‘Connection via SSID’.
■ Direct wireless connection
Note: ‘xxxxxx’ is last 6 digits of MAC ID.
SHARP_XL-HF401
S
SHA
Wi-Fi
SHARP_XL-HF401
SHARP_XL-HF401_xxxxxx
■ Connection via wireless router with WPS
Direct connection Configuration
WPS
12/3/30
HF-401PH_OM_EN_UK.fm
10
Wi-Fi network Setup for AirPlay / DLNA (continued)
1
Press the ON/STAND-BY button.
2
Press the NETWORK button on the remote control.
3
Press the iPod MENU button on the remote control.
4
Press the
/
button to select ‘Wi-Fi Setup’.
Press the ENTER button.
5
Press the
/
button to select ‘SSID Set’. Press the ENTER
button. Wait until the display shows “SSID Ready” which takes
about 40 seconds.
about 40 seconds.
6
On the iPod touch/iPhone/iPad, select ‘Settings’ --> ‘Wi-Fi’.
On the PC/Mac, enter the list of available wireless networks.
For other DLNA compatible devices, turn on the Wi-Fi. For
more details, refer to your devices’ manual.
On the PC/Mac, enter the list of available wireless networks.
For other DLNA compatible devices, turn on the Wi-Fi. For
more details, refer to your devices’ manual.
7
Select Sharp_XL-HF401 from the list of available networks.
8
Open web browser as Safari or Explorer on iPod touch / iPhone
/ iPad or PC/Mac. Type 192.168.1.1 at the address bar.
The XL-HF401 configuration page is displayed.
/ iPad or PC/Mac. Type 192.168.1.1 at the address bar.
The XL-HF401 configuration page is displayed.
9
Select Network Configuration tab.
10
Select your router SSID from the pull-down list of
Service Set ID (SSID)
.
11
Enter your network password if required (for some routers, you may
also need to tick DHCP under Advance Setting).
12
Change the name of SHARP_XL-HF401_xxxxxx in AirPlay Device
Name if you like and click Apply (*1).
13
Click Apply (*2) at the bottom of the page to apply your settings.
14
Click OK to confirm your settings.
15
On the iPod touch/iPhone/iPad, select ‘Settings’ -->
‘Wi-Fi’. On the PC/Mac, enter the list of available
wireless networks.
wireless networks.
16
Select your router from the list of available networks.
17
Continue with step 8 to 9 in ‘Direct wireless connection’
of page 9.
You can add other AirPlay devices to join the same Wi-Fi
network as the unit.
network as the unit.
1
On the iPod touch/iPhone/iPad, select ‘Settings’ -->
‘Wi-Fi’. On the PC/Mac, enter the list of available
wireless networks. For other DLNA compatible devices
turn on the Wi-Fi. For more details, refer to your devices’
manual.
‘Wi-Fi’. On the PC/Mac, enter the list of available
wireless networks. For other DLNA compatible devices
turn on the Wi-Fi. For more details, refer to your devices’
manual.
2
Select your router SSID from the list of available wireless
networks.
networks.
3
Wait until successful Wi-Fi connection from the
additional AirPlay devices to the router.
additional AirPlay devices to the router.
4
Continue with step 8 to 9 in ‘Direct wireless connection’
of page 9.
of page 9.
Notes:
● This product may face some irregularities due to various
unforseen reasons from other devices in the process of Wi-Fi
pairing. Should this happen, unplug the AC power lead, and plug
it back in.
pairing. Should this happen, unplug the AC power lead, and plug
it back in.
● If the Network function operates incorrectly, do the Network reset
(refer page 25).
Various function can be controlled from the remote control
or your AirPlay / DLNA device.
or your AirPlay / DLNA device.
■ Connection via SSID (wireless router without WPS)
SHARP XL-HF401
Network Configuration
192.168.1.1
SHARP_XL-HF401 xxxxx
SHARP XL-HF401
■ Connection of an AirPlay device to the
same Wi-Fi network
■ Various function control during AirPlay / DLNA
Function
Main unit
Remote
control
AirPlay
device
Volume up/
down
Play/pause
Next/previous
track
Mute
Display
CD/USB
12/3/30
HF-401PH_OM_EN_UK.fm
11
Wi-Fi network Setup for AirPlay / DLNA (continued)
Notes:
● For DLNA compatible devices, the function control may
vary depending on DLNA application used.
● To enable this unit to control iTunes software, the
setting below is required.
On: Network Stand-by mode is enabled.
During stand-by mode, if you select XL-HF401PH speakers
through AirPlay icon and tap/click PLAY on AirPlay device, the
unit will automatically power on and stream the music from your
AirPlay device. For other DLNA compatible devices, refer to your
devices’ manual.
To enable the Network Stand-by mode:
During Stand-by mode, press DEMO/DIMMER button on remote
control to select the Network Stand-by mode on or off. (refer page
6.)
To check the IP address of the router / Mac ID / SSID:
During stand-by mode, if you select XL-HF401PH speakers
through AirPlay icon and tap/click PLAY on AirPlay device, the
unit will automatically power on and stream the music from your
AirPlay device. For other DLNA compatible devices, refer to your
devices’ manual.
To enable the Network Stand-by mode:
During Stand-by mode, press DEMO/DIMMER button on remote
control to select the Network Stand-by mode on or off. (refer page
6.)
To check the IP address of the router / Mac ID / SSID:
1
Press iPod MENU button on the remote control.
2
Press
/
button on the remote control repeatedly.
The display will toggle as below:
Listening to the iPod, iPhone or iPad
Made for:
Caution:
Please update your iPod, iPhone and iPad unit to the latest
software version before using it. Please visit Apple’s homepage to
download the latest version for your iPod, iPhone and iPad.
Notes:
Please update your iPod, iPhone and iPad unit to the latest
software version before using it. Please visit Apple’s homepage to
download the latest version for your iPod, iPhone and iPad.
Notes:
● Charging terminal for iPod, iPhone and iPad:
● The message “This accessory is not made to work with
iPhone” or similar, may appear on the iPhone screen
when:
- battery is low.
- the iPhone is not properly docked (eg. slanting).
If this occurs, remove and re-dock the iPhone.
when:
- battery is low.
- the iPhone is not properly docked (eg. slanting).
If this occurs, remove and re-dock the iPhone.
● This product is made for iPod, iPhone and iPad. To prevent
random interference when iPod, iPhone or iPad is
connected, the headphone output of the main unit is
disabled, and “HP INVALID” will be displayed.
You may also experience brief audio interference during
incoming calls.
connected, the headphone output of the main unit is
disabled, and “HP INVALID” will be displayed.
You may also experience brief audio interference during
incoming calls.
● The headphone output of the main unit is switched off during inserting
iPod, iPhone and iPad unit. This is an Apple product specification.
Note:
The USB terminal does not support VIDEO out.
The USB terminal does not support VIDEO out.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the USB button on the remote control or FUNCTION button
repeatedly on the main unit to select USB function.
repeatedly on the main unit to select USB function.
3
Connect iPod, iPhone or iPad to the unit. “USB/iPod” will appear.
4
Press the / (CD/USB / ) button to start playback.
Note:
Stop button ( ) is invalid during iPod, iPhone or iPad playback.
Stop button ( ) is invalid during iPod, iPhone or iPad playback.
● Sound will only switch from iPhone to the main unit after
authentication process is completed in approximately 10
seconds.
seconds.
● Incoming calls will pause the playback.
● Once the calls are answered, the conversation can only be
heard through the built-in iPhone speaker. Turn on the
iPhone speaker or undock the iPhone to start
conversation.
iPhone speaker or undock the iPhone to start
conversation.
For Mac iTunes:
1
On the toolbar menu, click iTunes and select
Preferences.
2
Under Devices tab, check the ‘
Allow iTunes
audio control from remote control speakers’ box.
For Windows iTunes:
1
On the toolbar menu, click Edit and select
Preferences.
Preferences.
2
Under Devices tab, check the ‘
Allow iTunes
control from remote control speakers’ box.
Note: For more details, refer to the iTunes guide.
■ Network Stand-by mode
● iPod touch (4
th
generation)
● iPod touch (3
rd
generation)
● iPod touch (2
nd
generation)
● iPod touch (1
st
generation)
● iPod classic
● iPod nano (6
th
generation)
● iPod nano (5
th
generation)
● iPod nano (4
th
generation)
● iPod nano (3
rd
generation)
● iPod nano (2
nd
generation)
● iPhone 4S
● iPhone 4
● iPhone 3GS
● iPhone 3G
● iPhone
● iPad 2
● iPad
Condition
DOCK
USB terminal
USB function
YES
YES
(without iPod
or iPhone docking)
Other function
(iPod / CD / Network /
Tuner / Audio In / Line
In)
(iPod / CD / Network /
Tuner / Audio In / Line
In)
YES
NO
Stand-by
YES
NO
Wi-Fi Setup
Mac ID
SSID
(when using router)
IP address
■ iPod, iPhone and iPad connection via USB terminal
1
Insert the connector to the iPod, iPhone or iPad.
2
Place the iPad to the stand for iPad.
3
Connect the iPod, iPhone or iPad to the unit via USB
connector.
connector.
■ iPod, iPhone or iPad playback via USB terminal
■ iPhone playback
iPad
Connector
iPad
Stand for iPad
File name
Click on the first or last page to see other XL-HF401PH (serv.man3) service manuals if exist.