Sharp LC-40LE240EK (serv.man4) Service Manual / Technical Bulletin ▷ View online
LCD 2013 10 06
Date of Issue:
8
th
October 2013
Classification:
White
LCD TELEVISION TECHNICAL BULLETIN
Page 1 of 1
Sharp Electronics (UK) Limited
Reference
– RG08102013-1
Revision - 1
White
– Carry out as required
Yellow
– Carry out as required and whenever the unit comes in for service
Red
– Carry out on all units
MODELS
LCxxLE240K
LCxxLS240K
LCxxDV240K
LCxxDS240K
REASON
New firmware available to resolve the following issues:
Issues resolved in Version 0.6.6.h:
When changing the AV source, the unit may lockup.
At random occasions during a standby search, the u
nit may report “no signal”.
If you are watching DTV and you press the Stop button on the remote, block noise
appears.
ACTION
Update firmware to the latest version.
1. Download and exctract the firmware from the Technical Website. Copy the files
below onto a USB stick:
below onto a USB stick:
• mb6x_en.bin
• mboot.bin
• usb_auto_update.txt
2. Turn the power OFF by the switch or by removing the AC plug. Insert the USB stick
into the USB port on the TV.
3. Hold the OK button on the remote control and then turn the TV ON.
4. Keep the OK button pressed until the standby LED blinks rapidly.
5. When the standby LED starts to blink rapidly, you can release the OK key.
6. When the blinking has stopped, the TV turns on automatically.
7. After software updating, you must power OFF and ON the TV.
into the USB port on the TV.
3. Hold the OK button on the remote control and then turn the TV ON.
4. Keep the OK button pressed until the standby LED blinks rapidly.
5. When the standby LED starts to blink rapidly, you can release the OK key.
6. When the blinking has stopped, the TV turns on automatically.
7. After software updating, you must power OFF and ON the TV.
Display