DOWNLOAD Sharp XL-HF401PH (serv.man3) Service Manual ↓ Size: 2.21 MB | Pages: 28 in PDF or view online for FREE

12/3/30

HF-401PH_OM_EN_UK.fm

Unplug all accessories from the iPod or iPhone before
inserting it into the dock.

Note:
Do not use the docking station to connect your iPad. To
connect your iPad, refer to the information provided on
page 11.

● Please use the adaptor supplied with your iPod or iPhone unit.

● You can use an audio cable to connect your iPod to the AUDIO

IN socket if: 
1. your iPod adaptor does not fit into the iPod dock on the

main unit.

2. you have an iPod that does not have an iPod adaptor.
3. you have an iPod that does not have an iPod 30 pin

connector.

Simply remove the iPod or iPhone from the docking station
or  iPad connector from USB terminal. It is safe to do so
even during playback.

● If the TV Out setting is already turned on at video menu,

the video is automatically displayed on the TV screen
when ENTER key is pressed.

● TV out display  is not support through USB terminal.

(iPad)

● To return to watching video on iPod or iPhone screen,

press the MENU button to enter video menu. Then
press the iPod DISPLAY (TV OUT) button for more
than 2 seconds until “TV OUT OFF” appears. 

● During  iPod or iPhone video playback, pressing the

iPod DISPLAY (TV OUT) button will not toggle video
out display between iPod and TV.

● Unplug all accessories for the iPod or iPhone before

inserting it into the docking station.

● Stop button ( ) at main unit  is  invalid during  iPod

function.

■ iPod and iPhone connection (Dock only)

iPhone

iPhone 3G

iPhone 3GS

iPhone 4

iPhone 4S

■ To insert adaptor for iPod or iPhone 

Open the docking station for iPod and iPhone by pulling
up the cover.

Insert the adaptor for iPod or iPhone  into unit and
connect your iPod or iPhone.

■ To remove adaptor for iPod or iPhone 

Insert the tip of a screwdriver (“–” type, 
small) into the adaptor hole as shown 
and lift upward to remove.

iPhone

Dock connector

iPhone (bottom)

 Dock for iPhone

Connector for iPhone

Adaptor for iPhone 

■ iPod or iPhone playback

Press the ON/STAND-BY button to turn the power on.

Press the iPod button on the remote control or FUNCTION
button repeatedly on the main unit to select iPod function.

Insert iPod or iPhone unit into the dock of main unit.  “DOCK
OK” will appear.

Press the  /  (iPod   / ) button to start playback.

■ To disconnect iPod, iPhone or iPad

■ Watching videos on a TV connected to 

Press the iPod DISPLAY (TV OUT) button for more
than 2 seconds until “TV OUT ON” appear on display.

Press the ENTER button to start playback.

12/3/30

HF-401PH_OM_EN_UK.fm

Note:
When navigating the iPod,  iPhone or iPad menu with remote
control, do not operate any of the buttons on the iPod or iPhone
unit. The volume level is adjusted by turning the volume knob (on
the main unit) or by pressing the VOL (+ or –) button (on the
remote control). Adjusting the volume on the iPod, iPhone or iPad
units give no effect.

iPod, iPhone and iPad operations:
The functions described in the table below provide various iPod,
iPhone and iPad operations. Depending on which generation
iPod, iPhone or iPod you have, some of the functions described
in the table below may not work.

System on operation:
When the main unit is powered on, the iPod, iPhone or iPad units
will automatically power on when docked or connected in the unit.

System off (stand-by operation):
When the main unit is turned to stand-by mode, the docked iPod,
iPhone or connected iPad unit will automatically turn to stand-by
mode.

This system can play back a standard CD, CD-R/RW in the CD format
and CD-R/RW with MP3 or WMA files, but cannot record on them.
Some audio CD-R and CD-RW discs may not be playable due to the
state of the disc or the device that was used for recording.

● This system supports MPEG 1 Layer 3 and VBR files.

● During VBR file playback, time counter in the display may

differ from its actual playback time.

● Bitrate which is supported by MP3 is 32 ~ 320 kbps.

● “MP3” and “WMA” indicator will light up after the unit reads

information on an MP3 or WMA disc.

● Bitrate which is supported by WMA is 64 ~ 160 kbps.

■ Navigating the iPod,  iPhone or iPad 

Press the iPod MENU button to view the menu on iPod,
iPhone or iPad unit. Press it again to go back to previous
menu.

Use the PRESET (

 or 

) button to select an item on the

menu and then press ENTER button.

■ Various iPod, iPhone and iPad functions

Press in the pause 
mode.

Press in the 
playback mode.

Press in the 
playback or pause 
mode. 
If you press the 
button in the pause 
mode, press the  /

 button to start the 

desired track.

Press and hold 
down in the 
playback mode.

Release the button 
to resume 
playback.

____ 

Press to toggle 
infomation display.

____ 

Press to toggle 
repeat mode.

____ 

Press to toggle 
shuffle mode.

____ 

Press to view the 
iPod menu during 
iPod function.

____ 

Press to confirm the 
selection.

____ 

Press to select the 
iPod menu.

■ Disc playback

Press the ON/STAND-BY button to turn the power on.

Press the CD button on the remote control or FUNCTION
button repeatedly on the main unit to select CD function.

Press the OPEN/CLOSE button to open the disc tray.

Place the disc on the disc tray, label side up.

12/3/30

HF-401PH_OM_EN_UK.fm

● Do not place two discs in one disc tray.

● Do not play discs of special shapes (heart, octagon, etc). It

may cause malfunctions.

● Do not push the disc tray while it is moving.

● If the power fails while the tray is open, wait until the power is

restored.

● If TV or radio interference occurs during CD operation, move

the unit away from the TV or radio.

● Be sure to place 8 cm (3") disc in the middle of the disc tray.

● Due to the structure of the disc information, it takes longer to

read an MP3/WMA disc than a normal CD (approximately 20
to 90 seconds).

● When the end of the last track is reached during fast forward,

“END” will appear on the display and CD operation will be
paused. When the beginning of the first track is reached
during fast reverse, the unit will enter the playback mode (only
for CD).

● Rewritable multi-session discs with unfinished writing, can

still be played.

By using the Numeric buttons, the desired tracks on the
current disc can be played.
Use the Numeric buttons on the remote control to select
the desired track while playing the selected disc.

● The Numeric buttons allow you to select up to number 9.

● When selecting number 10 or higher, use the “10+” button.

● A track number higher than the number of tracks on the

disc cannot be selected.

● During random play, direct search is not possible.
To stop playback:
Press the   (CD/USB  ) button.

Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press the REPEAT button repeatedly until “Repeat One”
appears. Press the  /  (CD/USB  / ) button.
To repeat all tracks:
Press the REPEAT button repeatedly until “Repeat All”
appears. Press the  /  (CD/USB  / ) button.
To repeat desired tracks:
Perform steps 1 - 4 in “Programmed play” section on page 15
and then press the REPEAT button repeatedly until “Repeat
All” appears.
To cancel repeat play:
Press the REPEAT button repeatedly until “Normal” appears
and “

” disappears.

Caution:
After performing repeat play, be sure to press the   (CD/
USB ) 

button. Otherwise, the disc will play continuously.

Press the OPEN/CLOSE button to close the disc tray.

Press the  /  (CD/USB  /  ) button to start playback. After 
the last track is played, the unit will stop automatically.

■ Various disc functions

Press in the stop mode.

Press in the playback 
mode.

Press in the playback
mode. Press the  /   
button to resume 
playback from the 
paused point.

Press in the playback or 
stop mode. 
If you press the button in 
the stop mode, press the 

/  button to start the 

desired track.

Press and hold down in 
the playback mode.
Release the button to 
resume playback.

■ Direct track search

Press the “10+” button once.

Press the “1” button.

Press the “3” button.

Press the “10+” button twice.

Press the “1” button.

Press the “3” button.

Press the “0” button.

■ Repeat play

Selected track number

12/3/30

HF-401PH_OM_EN_UK.fm

The tracks on the disc can be played in random order
automatically.

To random play all tracks:
Press RANDOM button on the remote control until “Random”
appears. Press the   /  (CD/USB  / ) button.

To cancel random play:
Press the RANDOM button again. “RDM” indicator will
disappear.

● If you press the 

 button during random play, you can

move to the track selected next by the random operation.
On the other hand, the  

 button does not allow you to

move to the previous track. The beginning of the track
being played will be located.

● In random play, the unit will select and play tracks

automatically. (You cannot select the order of the tracks.)

You can choose up to 32 selections for playback in the order
you like.

To cancel the programmed play mode:
During programmed stop mode, press the   (CD/USB  )
button. The display will show “Memory Clear” and all the
programmed contents will be cleared.

Adding tracks to the programme:
If a programme has been previously stored, the “MEM”
indicator will be displayed. Press the MEMORY button.
Then follow step 2 to add tracks.

● When a disc is ejected, the programme is automatically

cancelled.

● If you press the ON/STAND-BY button to enter the

stand-by mode or change the function from CD to
another, the programmed selections will be cleared.

● During the programme operation, random play is not

possible.

■ Random play (shuffle)

■ Programmed play (CD)

While in the stop mode, press the MEMORY button on the
remote control to enter the programming save mode.

Press the Numeric buttons on the remote control to
select the desired track.

Note: To select track number 10 or higher, refer ’Direct
track search’ on page 14.

Repeat step 2 for other tracks. Up to 32 tracks can be
programmed. If you want to check the programmed tracks,
press the MEMORY button repeatedly. If you make a
mistake, the programmed tracks can be cleared by
pressing the CLEAR button.

Press the   /  (CD/USB  / ) button to start playback.  

Selected track number

■ Programmed play (MP3/WMA)

While in the stop mode, press the MEMORY button to
enter the programming save mode.

Press the PRESET (

 or 

) button on the remote

control to select the desired folder.

Then press Numeric buttons on the remote control to
select the desired tracks.

Note:  To select track number 10 or higher, refer
’Direct track search’ on page 14.

Repeat step 2 for other folder/tracks. Up to 32 tracks
can be programmed.

Press the   /  (CD/USB  / ) button to start playback.