Sharp SD-NX10 User Manual / Operation Manual ▷ View online
61
NX10H_UK51-61.fm
00/12/17
Refere
nc
es
T
roub
le
shoot
ing Cha
rt
If trouble occurs (reset)
When this product is subjected to strong external interference (mechanical shock,
excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is
operated incorrectly, it may malfunction.
excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is
operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
Unplug the power lead from the AC socket. Then, plug it in again and retry the
operation.
Unplug the power lead from the AC socket. Then, plug it in again and retry the
operation.
Caution:
This operation will erase all data stored in memory including clock, timer settings,
tuner preset, and CD or MiniDisc programme.
This operation will erase all data stored in memory including clock, timer settings,
tuner preset, and CD or MiniDisc programme.
Condensation
Before transporting the unit
Remove the CD and MiniDisc from the unit. Your unit checks whether there are any
discs inside. "CD NO DISC" and "MD NO DISC" appear if no disc is inside. Then, set
the unit to the power stand-by mode. Carrying the unit with discs left inside can dam-
age it.
discs inside. "CD NO DISC" and "MD NO DISC" appear if no disc is inside. Then, set
the unit to the power stand-by mode. Carrying the unit with discs left inside can dam-
age it.
Sudden temperature changes, storage or
operation in an extremely humid environ-
ment may cause condensation inside the
cabinet (CD pickup, MD pickup, etc.) or on
the transmitter on the remote control.
Condensation can cause the unit to mal-
function. If this happens, leave the power on
with no disc in the unit until normal playback
is possible (about 1 hour). Wipe off any con-
densation on the transmitter with a soft cloth
before operating the unit.
operation in an extremely humid environ-
ment may cause condensation inside the
cabinet (CD pickup, MD pickup, etc.) or on
the transmitter on the remote control.
Condensation can cause the unit to mal-
function. If this happens, leave the power on
with no disc in the unit until normal playback
is possible (about 1 hour). Wipe off any con-
densation on the transmitter with a soft cloth
before operating the unit.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
62
NX10H_UK62-63.fm
00/12/18
Refere
nc
es
Ma
int
e
nance
/ S
p
ecif
ica
ti
on
s
Maintenance
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a
dry cloth.
Caution:
Do not use chemically treated cleaning cloths or other chemicals.
dry cloth.
Caution:
Do not use chemically treated cleaning cloths or other chemicals.
Specifications
As part of our policy of continuous improvement, SHARP reserves the right to make design
and specification changes for product improvement without prior notice. The performance
specification figures indicated are nominal values of production units. There may be some
deviations from these values in individual units.
and specification changes for product improvement without prior notice. The performance
specification figures indicated are nominal values of production units. There may be some
deviations from these values in individual units.
General
Power source
AC 230 V, 50 Hz
Power consumption
Power on: 54 W
Power stand-by: 0.6 W (*)
Dimensions
MD/CD/tuner unit
Width: 318 mm (12-9/16")
Height: 210 mm (8-5/16")
Depth: 93 mm (3-11/16")
Height: 210 mm (8-5/16")
Depth: 93 mm (3-11/16")
Amplifier unit
Width: 160 mm (6-5/16")
Height: 210 mm (8-5/16")
Depth: 136 mm (5-3/8")
Height: 210 mm (8-5/16")
Depth: 136 mm (5-3/8")
Weight
MD/CD/tuner unit
3.7 kg (8.2 lbs.)
Amplifier unit
3.5 kg (7.7 lbs.)
Input/output terminals
MD/CD/tuner unit
Auxiliary input: 500 mV/47 kohms
Digital input (optical)
System output (RCA)
Line output: 500 mV/47 kohms
Headphones: 16 - 50 ohms (recommended: 32 ohms)
System control (SD-NX10H amplifier unit only)
Amplifier unit
System input (RCA)
Speakers; 6 ohms
System control (SD-NX10H MD/CD/tuner unit only)
( * )
This power consumption value is obtained when the demonstration mode is can-
celled in the power stand-by mode. Refer to page 16 to cancel the demonstration
mode.
celled in the power stand-by mode. Refer to page 16 to cancel the demonstration
mode.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
63
NX10H_UK62-63.fm
00/12/18
Refere
nc
es
Spe
c
ific
a
tion
s
Amplifier
CD player
MiniDisc
Tuner
Speaker
Amplification system
64fs 1-bit switching
(Remarks:fs = 44.1 kHz)
Rated output power
RMS: 50 W (25 W + 25 W) (DIN 45 324)
A/D noise shaping
7th-order (delta - sigma) modulation
Type
1-disc slot-in type compact disc player
Signal readout
Non-contact, 3-beam semiconductor laser pickup
D/A converter
1-bit D/A converter
Frequency response
20 - 20,000 Hz
Dynamic range
90 dB (1 kHz)
Type
MiniDisc Recorder
Signal readout
Non-contact, 3-beam semiconductor laser pickup
Rotation speed
400 - 900 rpm CLV, Approx.
Error correction
ACIRC (Advanced Cross Interleave Reed-Solomon Code)
Quantization
20-bit linear (A/D converter)
Coding
ATRAC (Adaptive TRansformed Acoustic Coding),
ATRAC 3
ATRAC 3
Sampling frequency
44.1 kHz
Recording method
Magnetic modulation overwrite method
Frequency response
20 - 20,000 Hz
D/A converter
1-bit D/A converter
Wow and flutter
Unmeasurable (less than 0.001% W. peak)
Signal/noise ratio
95 dB (1 kHz)
Dynamic range
90 dB (1 kHz)
Audio channel
Stereo: 2 channels (SP, LP2, LP4)
Monaural: 1 channel (MONO)
Frequency range
FM: 87.5 - 108 MHz
AM: 522 - 1,620 kHz
Type
2-way type speaker system
3 cm (1-3/16") Tweeter
10 cm (4") Woofer
Maximum input power
50 W
Rated input power
25 W
Impedance
6 ohms
Dimensions
Width: 187 mm (7-3/8")
Height: 423 mm (16-11/16")
Depth: 200 mm (7-7/8")
Height: 423 mm (16-11/16")
Depth: 200 mm (7-7/8")
Weight
3.7 kg (8.2 lbs.)/each
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
TINSE0363AWZZ
A0012.YT
A0012.YT
TERMS OF GUARANTEE
Sharp Electronics (UK) Ltd. (“Sharp”) guarantees to provide for the repair, or at its option the replace-
ment, of this product subject to the conditions listed below:-
ment, of this product subject to the conditions listed below:-
1. This guarantee shall only apply to faults which are due to inferior workmanship or materials. It does
not cover faults or damage caused by accident, misuse, fair wear and tear, neglect, tampering with
the product, or repair other than by a Service Facility appointed by Sharp.
the product, or repair other than by a Service Facility appointed by Sharp.
2. As this product is intended for private domestic use only, the guarantee will not apply if the product
is used in the course of a business, trade or profession.
3. To benefit from this guarantee, any fault which occurs must be notified to Sharp, or its appointed
Service Facility within one year from the date this product was purchased. Proof of purchase must
be provided.
be provided.
4. The guarantee does not cover carriage costs, jewelled styli, audio tapes, compact discs or batter-
ies.
5. In the unlikely event of this product requiring repair, please contact the supplier from whom it was
purchased. Where this is not possible, please contact the Sharp Customer Information Centre on
the telephone number given below.
the telephone number given below.
6. No person has any authority to vary the terms or conditions of this guarantee.
7. This guarantee is offered as an additional benefit to your statutory rights, and does not affect these
rights in any way.
If you have any difficulty operating this product, or would like information on other Sharp products,
please telephone the Sharp Customer Information Centre on the number given below.
please telephone the Sharp Customer Information Centre on the number given below.
Sharp Customer Information Centre - Telephone 08705 274277
SHARP ELECTRONICS (U.K.) LTD.
Sharp House, Thorp Road, Newton Heath, Manchester, M40 5BE
SHARP CORPORATION
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
