Sharp SD-NX10 (serv.man11) Service Manual / Specification ▷ View online
SD-NX10H
– 4 –
FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER
TO THE OPERATION MANUAL.
TO THE OPERATION MANUAL.
SPECIFICATIONS
SD-NX10H
CP-NX10H
Amplifier
CD player
MiniDisc
Tuner
64fs 1-bit switching
(Remarks:fs = 44.1 kHz)
Rated output power
RMS: 50 W (25 W + 25 W) (DIN 45 324)
A/D noise shaping
7th-order (delta - sigma) modulation
Type
1-disc slot-in type compact disc player
Signal readout
Non-contact, 3-beam semiconductor laser pickup
D/A converter
1-bit D/A converter
Frequency response
20 - 20,000 Hz
Dynamic range
90 dB (1 kHz)
Type
MiniDisc Recorder
Signal readout
Non-contact, 3-beam semiconductor laser pickup
Rotation speed
400 - 900 rpm CLV, Approx.
Error correction
ACIRC (Advanced Cross Interleave Reed-Solomon Code)
Quantization
20-bit linear (A/D converter)
Coding
ATRAC (Adaptive TRansform Acoustic Coding),
ATRAC 3
ATRAC 3
Sampling frequency
44.1 kHz
Recording method
Magnetic modulation overwrite method
Frequency response
20 - 20,000 Hz
D/A converter
1-bit D/A converter
Wow and flutter
Unmeasurable (less than 0.001% W. peak)
Signal/noise ratio
95 dB (1 kHz)
Dynamic range
90 dB (1 kHz)
Audio channel
Stereo: 2 channels (SP, LP2, LP4)
Monaural: 1 channel (MONO)
Frequency range
FM: 87.5 - 108 MHz
AM: 522 - 1,620 kHz
Type
3 cm (1-3/16") Tweeter
10 cm (4") Woofer
Maximum input power
50 W
Rated input power
25 W
Impedance
6 ohms
Dimensions
Width: 187 mm (7-3/8")
Height: 423 mm (16-11/16")
Depth: 200 mm (7-7/8")
Height: 423 mm (16-11/16")
Depth: 200 mm (7-7/8")
Weight
3.7 kg (8.2 lbs.)/each
General
Power source
AC 230 V, 50 Hz
Power consumption
Power on: 54 W
Power stand-by: 0.6 W (*)
Dimensions
MD/CD/tuner unit
Width: 318 mm (12-9/16")
Height: 210 mm (8-5/16")
Depth: 93 mm (3-11/16")
Height: 210 mm (8-5/16")
Depth: 93 mm (3-11/16")
Amplifier unit
Width: 160 mm (6-5/16")
Height: 210 mm (8-5/16")
Depth: 136 mm (5-3/8")
Height: 210 mm (8-5/16")
Depth: 136 mm (5-3/8")
Weight
MD/CD/tuner unit
3.7 kg (8.2 lbs.)
Amplifier unit
3.5 kg (7.7 lbs.)
Input/output terminals
MD/CD/tuner unit
Auxiliary input: 500 mV/47 kohms
Digital input (optical)
System output (RCA)
Line output: 500 mV/47 kohms
Headphones: 16 - 50 ohms (recommended: 32 ohms)
System control (SD-NX10H amplifier unit only)
Amplifier unit
System input (RCA)
Speakers; 6 ohms
System control (SD-NX10H MD/CD/tuner unit only)
( * )
This power consumption value is obtained when the demonstration mode is can-
celled in the power stand-by mode. Cancel the demonstration mode.
celled in the power stand-by mode. Cancel the demonstration mode.
Display
