Sharp SD-NX10 User Manual / Operation Manual ▷ View online
41
NX10H_UK37-43.fm
00/12/17
MD Reco
rd
ing
R
ecor
d
in
g t
o
a
MiniDi
sc
fr
o
m
a
CD
Recording on the top position of a recorded
MiniDisc
When the recording is finished, the top position mode will be cancelled.
The recorded track will be the first track on the MiniDisc.
All the tracks previously recorded will be renumbered.
Note:
The recorded track will be the first track on the MiniDisc.
All the tracks previously recorded will be renumbered.
Note:
Whilst in the pause mode or recording, the top position mode cannot be set or can-
celled.
Adjusting the recording level
You can adjust the recording level depending on the recording source by watching the
level meter.
level meter.
To stop recording:
Press the MD button.
The MiniDisc will stop.
The CD will continue playback.
The MiniDisc will stop.
The CD will continue playback.
1
Prepare for recording.
To record from a CD:
To record from the radio:
Load the desired CD and a recordable
MiniDisc.
MiniDisc.
Tune in to the desired station and load
a recordable MiniDisc.
a recordable MiniDisc.
2
Press the TOP POSITION button.
One more press will cancel the top position mode.
3
Start recording.
To record from a CD:
To record from the radio:
Press the HIGH or NORMAL button.
Press the MD
button after pressing
the REC button.
1
Press the CD button.
2
Press the
or
button to select the desired track.
3
Press the REC MODE button to select the recording mode.
4
Press the CD
button to start playback.
5
Press the REC button to pause recording.
6
Press the REC LEVEL/CURSOR or button to adjust the record-
ing level.
ing level.
Level meter
Recording level
Maximum level should not exceed "0dB".
The recording level can be adjusted in 2dB intervals between - 4dB and +10dB.
At this time, you can adjust the recording level with the
or
button.
7
Press the CD button.
8
Press the
or
button again to select the desired track to be
recorded.
9
Press the CD
button again to start recording.
0dB
-4dB ··· +10dB
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
42
NX10H_UK37-43.fm
00/12/17
MD Reco
rd
ing
Recor
d
ing
t
o
a
MiniD
isc
fr
om t
h
e
Radio
Recording to a MiniDisc from the Radio
To interrupt recording:
Press the MD
Press the MD
button.
To resume recording from the same point of MiniDisc, press the MD
button again.
To stop recording:
Press the MD button.
The MiniDisc will stop.
Press the MD button.
The MiniDisc will stop.
To mark track numbers whilst recording from the radio:
Press the REC button at the desired position during recording to create a new track
number. The track counter will be increased by one every time the button is pressed.
Press the REC button at the desired position during recording to create a new track
number. The track counter will be increased by one every time the button is pressed.
1
Tune in to the desired station. (See page 28.)
2
Load a recordable MiniDisc into the MD compartment.
3
Press the REC MODE button to select the recording mode.
4
Press the REC button.
The unit will enter the recording stand-by mode.
5
Press the MD
button to start recording.
About track numbers:
A recording is performed as a sin-
gle track, and only one number is
created.
gle track, and only one number is
created.
Track A
Single track
First track
MiniDisc
Radio
Third track
Second track
Track B
Track C
(Track A)
(Track B)
(Track C)
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
43
NX10H_UK37-43.fm
00/12/17
MD Reco
rd
ing
Chec
king Dis
p
la
ys
Checking Displays
To check the recording mode and remain-
ing recording time
To check the display whilst in the recording
mode
Whilst in the stop mode in MD function, press the REC MODE button.
Each time the button is pressed, the display will change as follows.
After the remaining recording time is displayed, the display will return to normal.
When resuming recording, it will be started in the recording mode that is con-
firmed in this procedure.
firmed in this procedure.
Remaining time in stereo recording mode
Remaining time in 2 times long recording mode
Remaining time in 4 times long recording mode
Remaining time in monaural recording mode
Whilst in the recording mode, press the DISPLAY button.
Each time the button is pressed, the display will change as follows.
When recording is finished, the display will return to normal.
Even if the recording mode is monaural, the level meter is displayed in stereo.
Elapsed playing time
"NO NAME" appears.
Level meter
Remaining recording time
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
44
NX10H_UK44-50.fm
00/12/17
M
D
Editi
n
g
Titling a M
iniDis
c
Titling a MiniDisc
Creating disc and track names
You can give a name to discs and tracks.
One disc name and up to 255 track names can be created per disc (a maximum of 40
characters for the disc and each track name and a total of 1,700 characters can be
entered).
One disc name and up to 255 track names can be created per disc (a maximum of 40
characters for the disc and each track name and a total of 1,700 characters can be
entered).
Playback-only MiniDisc cannot be edited.
1
Press the MD button and load a MiniDisc. (See page 23.)
2
Select either "DISC NAME" or "TRACK NAME".
To create a disc name:
To create a track name:
Whilst in the stop mode of MiniDisc,
press the NAME/TOC EDIT button,
and within 10 seconds, press the REC
LEVEL/CURSOR or button to se-
lect "DISC NAME".
press the NAME/TOC EDIT button,
and within 10 seconds, press the REC
LEVEL/CURSOR or button to se-
lect "DISC NAME".
During playback or in the pause mode
of MiniDisc, press the NAME/TOC
EDIT button to select "TRACK NAME".
of MiniDisc, press the NAME/TOC
EDIT button to select "TRACK NAME".
3
Within 10 seconds, press the ENTER button.
To cancel the operation, press the NAME/TOC EDIT button.
The unit will enter the character input mode.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Click on the first or last page to see other SD-NX10 service manuals if exist.