Sharp SD-NX10 User Manual / Operation Manual ▷ View online
53
NX10H_UK51-61.fm
00/12/17
Ad
v
a
nced Fe
atur
es
Ti
mer
a
nd S
le
e
p Oper
a
ti
o
n
Using the same timer setting
Once memorised, the timer setting can be used as follows.
Notes:
The timer setting will be cleared when the unit is unplugged or the power failure
occurs.
occurs.
The timer playback is possible with a CD or MD even if the repeat, random, or pro-
grammed playback is set.
grammed playback is set.
When performing timer playback or recording using another unit connected to the
AUX IN or DIGITAL IN sockets, select "AUX" or "OPT" in step 11. At this time, only
this stereo system will be turned off automatically. (Another unit will not be turned
off.)
AUX IN or DIGITAL IN sockets, select "AUX" or "OPT" in step 11. At this time, only
this stereo system will be turned off automatically. (Another unit will not be turned
off.)
To check the timer setting:
To change the timer setting:
Perform "Timer playback/Timer recording" from the beginning. (See pages 51 - 52).
To cancel the timer playback/timer recording:
If the power is turned on whilst in the playback or recording stand-by mode, the
timer setting will be cancelled.
timer setting will be cancelled.
Proceed as follows to cancel without turning the power on.
1
Press the TIMER/DELETE button.
2
Within 10 seconds, press the REC LEVEL/CURSOR or button
to select "STANDBY".
to select "STANDBY".
If "STANDBY" is not displayed, the clock setting has been cleared.
In this case, reset the clock and the timer.
3
Within 10 seconds, press the ENTER button.
The timer setting is displayed in order.
The unit will enter the stand-by mode and then the playback or recording stand-by
mode automatically.
mode automatically.
1
Whilst in the timer playback or timer recording stand-by mode, press the TIMER/
DELETE button.
DELETE button.
2
Within 10 seconds, press the REC LEVEL/CURSOR or button to select
"TIMER CALL".
"TIMER CALL".
3
Press the ENTER button.
After the timer setting is displayed in order, the display will return to normal.
1
Press the TIMER/DELETE button.
2
Within 10 seconds, press the REC LEVEL/CURSOR or button to select
"CANCEL".
"CANCEL".
3
Press the ENTER button.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
54
NX10H_UK51-61.fm
00/12/17
Ad
v
a
nced Fe
atur
es
Ti
mer
a
nd S
le
e
p Oper
a
ti
o
n
Timer and Sleep Operation (continued)
Sleep operation
The radio, CD, and MiniDisc can all be turned off automatically.
To confirm the remaining sleep time:
The display will return to normal after approximately 10 seconds.
You can change the sleep time.
Press the ENTER button whilst the sleep remaining time is displayed (see steps 5
- 6 on the left).
- 6 on the left).
To cancel the sleep operation:
The sleep timer is cancelled when the unit enters the stand-by mode.
To cancel only the sleep timer without setting the unit to the stand-by mode, proceed
as follows.
To cancel only the sleep timer without setting the unit to the stand-by mode, proceed
as follows.
1
Play back the desired sound source.
2
Press the TIMER/DELETE button.
3
Within 10 seconds, press the REC LEVEL/CURSOR or button
to select "SLEEP".
to select "SLEEP".
4
Within 10 seconds, press the ENTER button.
5
Press the REC LEVEL/CURSOR or button to specify the sleep
time.
time.
(Maximum: 2 hours - Minimum: 1 minute)
6
Press the ENTER button.
7
Your system will enter the power stand-by mode automatically af-
ter the preset time has elapsed.
ter the preset time has elapsed.
The volume will be turned down 1 minute before the sleep operation finishes.
1
Press the TIMER/DELETE button whilst the sleep timer is set.
2
Within 10 seconds, press the REC REVEL/CURSOR or button to select
"SLEEP".
"SLEEP".
Remaining sleep time
1
Press the TIMER/DELETE button whilst the sleep timer is set.
2
Within 10 seconds, press the REC LEVEL/CURSOR or button to select
"SLEEP OFF".
"SLEEP OFF".
3
Within 10 seconds, press the ENTER button.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
55
NX10H_UK51-61.fm
00/12/17
Ad
v
a
nced Fe
atur
es
Ti
mer
a
nd S
le
e
p Oper
a
ti
o
n
To use sleep and timer playback in combi-
nation
nation
You can fall asleep to the radio and wake up with the sound from a CD.
To use sleep and timer recording in combi-
nation
nation
You can fall asleep to the sound from a CD and record the desired station whilst you
are sleeping.
are sleeping.
1
Set the sleep time (steps 1 - 6, page 54).
2
Set the timer playback (steps 1 - 14, pages 51 - 52).
2. Timer playback setting
1. Sleep timer setting
Timer playback
start time
start time
1 minute - 2 hours
Desired time
Sleep operation will
automatically stop.
automatically stop.
End time
1
Set the sleep time (steps 1 - 6, page 54).
2
Set the timer recording (steps 1 - 14, pages 51 - 52).
2. Timer recording setting
1. Sleep timer setting
Timer recording
start time
start time
1 minute - 2 hours
Desired time
Sleep operation will
automatically stop.
automatically stop.
End time
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
56
NX10H_UK51-61.fm
00/12/17
Ad
v
a
nced Fe
atur
es
Enhancing Y
our
St
e
reo Sys
te
m
Enhancing Your Stereo System
Before connecting external units, set this unit to the stand-by mode and turn off the
power of the external units.
power of the external units.
To the analogue
input sockets
input sockets
MD deck, digital tuners
or DAT decks
or DAT decks
Connecting cable
for digital recording
for digital recording
To the optical line
output socket
output socket
To the line output
sockets
sockets
Commercially
available RCA lead
available RCA lead
VCR, DVD, etc.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Click on the first or last page to see other SD-NX10 service manuals if exist.