Sharp SD-NX10 User Manual / Operation Manual ▷ View online
49
NX10H_UK44-50.fm
00/12/17
M
D
Editi
n
g
E
d
it
in
g
a Rec
o
rd
ed M
iniDisc
To move the programmed tracks
Note:
If a track is programmed twice or more, the first instruction will precede to the oth-
ers.
ers.
To erase one track
Caution:
Once a track has been erased, it cannot be recovered. Check the track number
before erasing it.
Once a track has been erased, it cannot be recovered. Check the track number
before erasing it.
Notes:
When a track is erased, the numbers assigned to the tracks following the erased
track will be automatically decreased by one.
track will be automatically decreased by one.
When a track is erased, the track name will be erased at the same time.
It is also possible to erase tracks by selecting either menu of "ERASE" or "ALL
ERASE" with the NAME/TOC EDIT button on the remote control.
ERASE" with the NAME/TOC EDIT button on the remote control.
1
Programme the tracks you want to move. (See page 27.)
2
Press the NAME/TOC EDIT button.
3
Within 10 seconds, press the ENTER button.
To cancel the operation, press the NAME/TOC EDIT button.
4
Press the ENTER button again.
Tracks are rearranged.
The programmed tracks will come to the top of the disc.
1
Whilst in the stop mode, select the track you want to erase by
pressing the
pressing the
or
button. Or start playing the track to be
erased, and then press the MD
button to enter the pause mode.
2
Press the ERASE button.
To cancel the operation, press the MD button.
3
Press the ERASE button for 2 seconds or more.
The track is erased, and the unit is stopped at the beginning of the next track.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
50
NX10H_UK44-50.fm
00/12/17
M
D
Editi
n
g
E
d
it
in
g
a Rec
o
rd
ed M
iniDisc
Editing a Recorded MiniDisc (continued)
To erase all the tracks at once
To erase the programmed tracks at once
1
Press the MD button.
2
Press the ERASE button.
To cancel the operation, press the MD button.
3
Press the ERASE button for 3 seconds or more.
All the track numbers and track names are erased.
1
Programme the tracks you want to erase. (See page 27.)
Up to 20 tracks can be programmed.
2
Press the NAME/TOC EDIT button on the remote control.
3
Within 10 seconds, press the REC LEVEL/CURSOR or button
on the remote control to select the "PRGM ERASE".
on the remote control to select the "PRGM ERASE".
4
Within 10 seconds, press the ENTER button on the remote control.
To cancel the operation, press the MD button.
5
Press the ENTER button on the remote control.
The programmed tracks are erased.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
51
NX10H_UK51-61.fm
00/12/17
Ad
v
a
nced Fe
atur
es
Ti
mer
a
nd S
le
e
p Oper
a
ti
o
n
Timer and Sleep Operation
Timer playback:
The unit turns on and plays the desired source (CD, MD, TUNER, AUX, OPT) at the
preset time. At the end time, the unit enters the power stand-by mode automatically.
Timer recording:
The unit turns on and starts recording from the desired source (TUNER, AUX, OPT)
at the preset time. At the end time, the unit enters the power stand-by mode automat-
ically.
The unit turns on and plays the desired source (CD, MD, TUNER, AUX, OPT) at the
preset time. At the end time, the unit enters the power stand-by mode automatically.
Timer recording:
The unit turns on and starts recording from the desired source (TUNER, AUX, OPT)
at the preset time. At the end time, the unit enters the power stand-by mode automat-
ically.
Timer playback/Timer recording
Before setting timer:
Whilst the power is in the stand-by mode, press the DISPLAY button on the re-
mote control to check that the clock is on time.
mote control to check that the clock is on time.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TIMER/DELETE button.
3
Within 10 seconds, press the REC LEVEL/CURSOR or button
to select "TIMER SET".
to select "TIMER SET".
4
Within 10 seconds, press the ENTER button.
Continued to the next page
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
52
NX10H_UK51-61.fm
00/12/17
Ad
v
a
nced Fe
atur
es
Ti
mer
a
nd S
le
e
p Oper
a
ti
o
n
Timer and Sleep Operation (continued)
5
Press the REC LEVEL/CURSOR or button to select "TIMER
PLAY" or "TIMER REC" mode.
PLAY" or "TIMER REC" mode.
For timer playback:
For timer recording:
6
Press the ENTER button.
7
Press the REC LEVEL/CURSOR or button to specify the hour
to start, and press the ENTER button.
to start, and press the ENTER button.
8
Press the REC LEVEL/CURSOR or button to specify the min-
utes, and press the ENTER button.
utes, and press the ENTER button.
Unless the timer setting is changed, the ending time will automatically be set for
one hour after the starting time.
one hour after the starting time.
9
Press the REC LEVEL/CURSOR or button to specify the hour
to stop, and press the ENTER button.
to stop, and press the ENTER button.
10
Press the REC LEVEL/CURSOR or button to specify the min-
utes, and press the ENTER button.
11
Press the REC LEVEL/CURSOR or button to select the desired
function.
To select the timer playback source: CD, MD, TUNER, AUX or OPT.
To select the timer recording source: TUNER, AUX or OPT.
12
Press the ENTER button.
13
Press the REC LEVEL/CURSOR or button to adjust the volume.
Be careful not to turn the volume up too high.
14
Press the ENTER button.
Timer playback
Timer recording
The timer setting is displayed in order.
The unit will enter the stand-by mode and
then the playback or recording stand-by
mode automatically.
then the playback or recording stand-by
mode automatically.
When the preset time is reached, playback or recording will start.
In timer playback, the volume will increase gradually. In timer recording, it will
start with the volume you set.
start with the volume you set.
When the timer end time is reached, the system will enter the power stand-by
mode automatically.
mode automatically.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Click on the first or last page to see other SD-NX10 service manuals if exist.