Sharp HT-X1H User Manual / Operation Manual ▷ View online
04/10/18
HT-X1H(E)6.fm
53
HT-X1H
TINSEA037SJZZ
Adv
a
nced F
eatures
!
Audio Signal/Speaker Indicators
Audio signal indicators light up for the corresponding audio source,
and speaker indicators are illuminated according to signals sent to
the speakers.
and speaker indicators are illuminated according to signals sent to
the speakers.
Example:
When 2.1 channel audio signals (L, R, LFE) are received, the audio
signal indicators "L", "R" and "LFE" light up.
The illustration below indicates that 2 channel stereo sound (L and
R) is reproduced.
When 2.1 channel audio signals (L, R, LFE) are received, the audio
signal indicators "L", "R" and "LFE" light up.
The illustration below indicates that 2 channel stereo sound (L and
R) is reproduced.
2 channel stereo sound is converted to 5.1 channel surround sound,
and all the speaker indicators "
and all the speaker indicators "
" light up.
Audio Signal/Speaker Indicators:
Notes:
"
You can switch the audio output when the disc contains sounds
of multiple audio formats (Dolby Digital, DTS, etc.). See page 32.
of multiple audio formats (Dolby Digital, DTS, etc.). See page 32.
"
Sound may not be produced from the subwoofer/amplifier unit
depending on the disc.
depending on the disc.
"
You cannot change the multi channel mode or stereo mode
whilst listening to the radio.
whilst listening to the radio.
"
If sound is unpleasant to listen to, change the multi channel mode
or stereo mode.
or stereo mode.
"
Settings for the multi channel mode and stereo mode are
retained by input (DVD, AUX DIGITAL and AUX ANALOG).
retained by input (DVD, AUX DIGITAL and AUX ANALOG).
When Dolby Pro Logic is activated
(2)
(1)
(3) (4)
(6)
(5)
(8)
(10) (11)
(9)
(7)
(12) (13)
Audio signal indicator
Speaker indicator
L, R, LFE: Incoming audio signals
" " appears when the speakers are
receiving audio signals.
receiving audio signals.
(1)Left Front Speaker Indicator
(2)Left Indicator
(3)Centre Indicator
(4)Centre Speaker Indicator
(5)Right Indicator
(6)Right Front Speaker Indicator
(7)Low Frequency Effect Indicator
(8)Surround Monaural Signal Indicator
(2)Left Indicator
(3)Centre Indicator
(4)Centre Speaker Indicator
(5)Right Indicator
(6)Right Front Speaker Indicator
(7)Low Frequency Effect Indicator
(8)Surround Monaural Signal Indicator
(Lights up when the surround speakers receive monaural sig-
nals.)
nals.)
(9)Left Surround Speaker Indicator
(10)Left Surround Indicator
(11)Subwoofer Indicator
(12)Right Surround Indicator
(13)Right Surround Speaker Indicator
(11)Subwoofer Indicator
(12)Right Surround Indicator
(13)Right Surround Speaker Indicator
7
04/10/18
HT-X1H(E)6.fm
54
HT-X1H
TINSEA037SJZZ
Adv
a
nced F
eatures
Enjoying surround sound (sound mode) (continued)
You can enjoy spacious sound recorded in Dolby Digital or DTS.
Also, Dolby Pro Logic allows you to enjoy spacious 2 channel ste-
reo sound.
Also, Dolby Pro Logic allows you to enjoy spacious 2 channel ste-
reo sound.
!
Listening to 2 channel stereo sounds
Notes:
"
When the surround mode is set to "STEREO" or "VIRTUAL
(SURROUND)", the same monaural sound is reproduced in the
both of the right and left channels.
(SURROUND)", the same monaural sound is reproduced in the
both of the right and left channels.
"
Some discs are recorded at 96 kHz (sampling frequency). When
this type of disc is played on a compatible player and signals are
digitally [AUX (DIGITAL) IN] sent to this unit, the sound mode is
changed to "STEREO" automatically. The sound mode cannot be
changed during playback.
this type of disc is played on a compatible player and signals are
digitally [AUX (DIGITAL) IN] sent to this unit, the sound mode is
changed to "STEREO" automatically. The sound mode cannot be
changed during playback.
Whilst the disc is playing, press the STEREO button.
Example: DTS format
Example: DTS format
You can enjoy 2 channel ste-
reo sound.
When you press once, the last used setting appears. To change it,
press the button repeatedly within 3 seconds.
reo sound.
When you press once, the last used setting appears. To change it,
press the button repeatedly within 3 seconds.
STEREO:
You can enjoy the great acoustic effects of the
front speakers and subwoofer/amplifier unit.
front speakers and subwoofer/amplifier unit.
VIRTUAL (*):
Although the surround speaker does not work, you
can enjoy spacious surround effects.
It sounds as if speakers are also placed in .
can enjoy spacious surround effects.
It sounds as if speakers are also placed in .
(*)
For CD playback, "SURROUND" appears instead of "VIRTU-
AL" (effects are the same).
AL" (effects are the same).
STEREO
VIRTUAL (*)
04/10/18
HT-X1H(E)6.fm
55
HT-X1H
TINSEA037SJZZ
Adv
a
nced F
eatures
!
Listening to sounds in the multi channel mode
(5.1 ch, etc.)
(5.1 ch, etc.)
Notes:
"
When monaural signals are received in the multi channel mode,
only the centre speaker and subwoofer/amplifier unit produce
sound. If played in the "STEREO" mode, the same sound is
reproduced from the right and left speakers.
only the centre speaker and subwoofer/amplifier unit produce
sound. If played in the "STEREO" mode, the same sound is
reproduced from the right and left speakers.
"
When you play Dolby Digital or DTS sound with "STADIUM" or
"HALL" set, surround is automatically set to "STANDARD".
"HALL" set, surround is automatically set to "STANDARD".
DVD (Dolby Digital or DTS)
Whilst the disc is playing, press the MULTI-CH button.
Example: DTS format
Example: DTS format
A maximum of 5.1-ch surround
sound is reproduced to provide
three-dimensional effect.
When you press once, the last used setting appears. To change it,
press the button repeatedly within 3 seconds.
sound is reproduced to provide
three-dimensional effect.
When you press once, the last used setting appears. To change it,
press the button repeatedly within 3 seconds.
STANDARD:
You can enjoy the original sound as it is.
MOVIE:
The bass level is increased for powerful sound ef-
fect.
fect.
MUSIC:
You can enjoy lively sound by producing the artic-
ulate sound.
ulate sound.
NIGHT:
The dynamic range control (compression) is acti-
vated automatically and you can enjoy clear sound
even at low volumes.
vated automatically and you can enjoy clear sound
even at low volumes.
Note:
When listening to Dolby Digital or DTS sound, you cannot select
"STADIUM" and "HALL".
STANDARD
MOVIE
MUSIC
NIGHT
2 channel stereo sound (CD, videotapes, etc.)
Whilst the disc is playing, press the MULTI-CH button.
Example: 2-ch stereo sound
Example: 2-ch stereo sound
Dolby Pro Logic converts 2
channel stereo sound of
CDs, etc. to 5.1 channel.
When you press once, the last used setting appears. To change it,
press the button repeatedly within 3 seconds.
channel stereo sound of
CDs, etc. to 5.1 channel.
When you press once, the last used setting appears. To change it,
press the button repeatedly within 3 seconds.
STANDARD:
You can enjoy the original sound as it is.
MOVIE:
The bass level is increased for powerful sound ef-
fect.
fect.
MUSIC:
You can enjoy lively sound by producing the artic-
ulate sound.
ulate sound.
NIGHT:
Soft but powerful sound is achieved even at low
volumes.
volumes.
STADIUM:
You feel like one of the audience in a stadium.
HALL:
A concert hall atmosphere is created.
STANDARD
MOVIE
MUSIC
NIGHT
STADIUM
HALL
7
04/10/18
HT-X1H(E)6.fm
56
HT-X1H
TINSEA037SJZZ
Adv
a
nced F
eatures
Changing the default setting of the amplifier
Change settings according to the connected speakers.
Speaker delay setting (See page 57.)
Speaker level setting (See page 58.)
Test tone (See page 58.)
Speaker level setting (See page 58.)
Test tone (See page 58.)
Example:
If the right surround speaker is 3.3 m away from the listening posi-
tion, change settings as shown below (adjust the SR).
If the right surround speaker is 3.3 m away from the listening posi-
tion, change settings as shown below (adjust the SR).
Default settings:
Delay - - - 2 m
Level - - - 0 dB (FL, CT, FR, SR, SL), + 5 dB (SW)
Delay - - - 2 m
Level - - - 0 dB (FL, CT, FR, SR, SL), + 5 dB (SW)
1
In "Speaker delay setting", set the right surround speaker (SR)
to 3.3 m.
to 3.3 m.
2
In "Speaker level setting", slightly increase the level of the right
surround speaker as it is a little farther than others (see page
58).
surround speaker as it is a little farther than others (see page
58).
3
In "Test tone", check the sound from each speaker (see page
58).
58).
FL
FR
SL
Default setting: 2 m
SR
SW
CT
FL
FR
SL
SR
SW
CT
3.3 m
Speaker type
Delay range
Level range
FL
Front speaker (Left)
0.1 to 9.0 m
- 6 dB to + 6 dB
CT
Centre speaker
0.1 to 9.0 m
- 6 dB to + 6 dB
FR
Front speaker (Right)
0.1 to 9.0 m
- 6 dB to + 6 dB
SR Surround speaker (Right)
0.1 to 9.0 m
- 6 dB to + 6 dB
SL
Surround speaker (Left)
0.1 to 9.0 m
- 6 dB to + 6 dB
SW Subwoofer/amplifier unit
- 10 dB to + 10 dB
If you press during
the operation, you
can go back one step.
the operation, you
can go back one step.
Click on the first or last page to see other HT-X1H service manuals if exist.