DOWNLOAD Sharp DK-AP8P Service Manual ↓ Size: 1.86 MB | Pages: 26 in PDF or view online for FREE

Model
DK-AP8P
Pages
26
Size
1.86 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Audio / Portable
File
dk-ap8p.pdf
Date

Sharp DK-AP8P User Manual / Operation Manual ▷ View online

 
E-2
 
2009 September 17 
DK-AP8P_A6_09 EN.fm
 
ENGLISH
 
9
3
8
7
6
5
4
2
 
DK-AP8P
 
1
 
General Inf
ormation
 
Precautions
 
 
General
 
 
Do not place anything on top of the unit.
 
 
Do not expose the unit to moisture, to temperatures higher 
than 60˚C (140˚F) or to extremely low temperatures.
 
 
If your system does not work properly, disconnect the AC/DC 
adaptor from the wall socket. Plug the AC/DC adaptor back in, 
and then turn on your system.
 
 
SHARP is not responsible for damage due to improper use. 
Refer all servicing to a SHARP authorised service centre.
 
 
No naked flame sources, such as lighted candles, should be 
placed on the apparatus.
 
 
Attention should be drawn to the environmental aspects of 
battery disposal.
 
 
The apparatus is designed for use in moderate climates.
 
 
This unit should only be used within the range of 5˚C - 35˚C
(41˚F - 95˚F).
 
Warning:
 
The voltage used must be the same as that specified on this unit.
Using this product with a higher voltage other than that which is
specified is dangerous and may result in a fire or other type of
accident causing damage. SHARP will not be held responsible
for any damage resulting from use of this unit with a voltage
other than that which is specified.
 
 
Volume control
 
The sound level at a given volume setting depends on speaker
efficiency, location and various other factors. It is advisable to
avoid exposure to high volume levels. Do not turn the volume on
to full at switch on. Listen to music at moderate levels. 
 
 
Please ensure that the equipment is 
positioned in a well-ventilated area 
and ensure that there is at least
10 cm (4") of free space along the 
sides, top and back of the equipment.
 
 
Use the unit on a firm, level surface free from vibration.
 
 
Keep the unit away from direct sunlight, strong magnetic 
fields, excessive dust, humidity and electronic/electrical 
equipment (home computers, facsimiles, etc.) which generate 
electrical noise.
 
 
In case of an electrical storm, unplug the unit for safety.
 
 
Do not use an external power supply other than the 6V DC 
supplied with this unit as it may be damaged.
 
 
Hold the AC/DC adaptor by the head when removing it from 
the wall socket, as pulling the lead can damage internal wires.
 
 
The AC/DC adaptor is used as a disconnect device and shall 
always remain readily operable.
10 cm (4")
10 cm (4")
 
 
Do not remove the outer 
cover, as this may result in 
electric shock.  Refer 
internal service to your 
local SHARP service 
facility.
 
 
The ventilation should not be impeded by covering the 
ventilation openings with items, such as newspapers, 
tablecloths, curtains, etc.
ON/STAND-BY
ESOUND
 
E-3
 
2009 September 17 
DK-AP8P_A6_09 EN.fm
 
ENGLISH
 
DK-AP8P
 
General Inf
ormation
 
Controls and indicators
 
 
Precaution in using the touch panel
 
 
Use soft cloth to gently clean the touch panel.
 
 
Always place the remote control face up to avoid damage to 
the touch pad.
 
 
Do not press the pad too hard, it can damage the touch 
sensor.
 
 
Touch only on one dot for each function as it will not operate 
if you touch 2 pads simultaneously.
 
 
Main unit front view
 
Reference page
1.
Sliding Top Cover . . . . . . . . . . . . . . . . . . . . . . . . . .  10
2.
iPod and iPhone Dock  . . . . . . . . . . . . . . . . . . . . . .  10
3.
ON/STAND-BY Button  . . . . . . . . . . . . . . . . . . . . . . .  8
4.
E
 
SOUND
 
 Button  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8
5.
Volume Down Button  . . . . . . . . . . . . . . . . . . . . . . . .  8
6.
Volume Up Button  . . . . . . . . . . . . . . . . . . . . . . . . . .  8
7.
On/Stand-by Indicator  . . . . . . . . . . . . . . . . . . . . . . .  8
8.
E
 
SOUND
 
 Indicator  . . . . . . . . . . . . . . . . . . . . . . . . . . .  8
9.
Subwoofer Port   . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8
 
 
Remote control with touch panel
 
Reference page
1.
Remote Control Transmitter  . . . . . . . . . . . . . . . . . . .7
2.
iPod and iPhone Menu Pad  . . . . . . . . . . . . . . . . . .  11
3.
iPod and iPhone Enter Pad  . . . . . . . . . . . . . . . . . .  11
4.
Remote Control Active Indicator . . . . . . . . . . . . . . .  8
5.
iPod and iPhone Skip Up and Down Pads . . . . . .  11
6.
On/Stand-by Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8
7.
iPod and iPhone Cue and Review Pads  . . . . . . . .  11
8.
iPod and iPhone Shuffle Pad . . . . . . . . . . . . . . . . .  11
9.
iPod and iPhone Play/Pause Pad  . . . . . . . . . . . . .  11
10. iPod and iPhone TV Display Pad . . . . . . . . . . . . . .  11
11. E
 
SOUND
 
 Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8
12. Volume Up and Down Pads . . . . . . . . . . . . . . . . . . . .8
13. iPod and iPhone Cursor Up and Down Pads . . . . .11
Note:
 
Before using remote control, please remove plastic protective
shield at battery holder.
ON/STAND-BY
ESOUND
3
2
1
7
9
8
5
6
4
Main Unit
CURSOR
ENTER
MENU
TV DISPLAY
REVIEW
  CUE/
SKIP
ON/STAND-BY
VOLUME
PL
AY MODE
E
SOUND
SHUFFLE
6
5
4
2
3
7
1
11
10
8
9
12
13
Remote Control with touch panel
Dot
Dot
Battery holder
Plastic shield
 
E-4
 
2009 September 17 
DK-AP8P_A6_09 EN.fm
 
ENGLISH
 
9
3
8
7
6
5
4
2
 
DK-AP8P
 
1
 
General Inf
ormation
 
 
 
 
Main unit back view
 
Reference page
1.
Video Out Socket   . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.
Audio Input Socket. . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.
DC Input Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
 
 
Main unit bottom view
 
Reference page
1.
Battery Compartment   . . . . . . . . . . . . . . . . . . . . . . .  6
3
1
2
1
SERIAL NO.
NO. DE SERIE
DK-AP8P
MODEL NO.
NO.DE MODELO
MADE IN MALAYSIA
FABRIQUÉ EN MALAISIE / FABRICADO EN MALASIA
A készülék hátlapjának
eltávolítása
ÉLETVESZÉLYES!
MUSIC SYSTEM / SISTEMA MUSICAL
DC IN 6V       2 A
6V        (UM-3/SUM-3, R6/AA) x4
[DO NOT USE UNSPECIFIED AC ADAPTOR - - -]
The spec label (*)
(*) Label is located at the bottom of the unit.
The spec label illustration may be different from
the actual label used.
 
E-5
 
2009 September 17 
DK-AP8P_A6_09 EN.fm
 
ENGLISH
 
DK-AP8P
 
Preparation f
or Use
 
System connections
 
 
Connecting iPod or iPhone to TV
 
Photo and video files from iPod or iPhone can be viewed by
connecting the system to TV/monitor.
If the TV/monitor has a video input, connect it to the VIDEO OUT
socket at the back of the unit and set the TV Out on the iPod or
iPhone unit to “ON” position.
 
 
Watching videos on a TV connected to iPod or 
iPhone
 
Notes:
 
 
If the TV Out setting is already turned ON at video menu, the 
video is automatically displayed on the TV screen when iPod 
or iPhone starts playback.
 
 
To return to watching video on iPod or iPhone screen, repeat 
steps 1 to 3.
 
 
During iPod or iPhone video playback, touching the TV 
DISPLAY pad will not toggle video out display between iPod 
or iPhone and TV.
 
 
Please make sure to set iPod or iPhone unit to either NTSC 
or PAL to match your TV signal. Please visit Apple’s home 
page for further information.
 
 
Customer should also refer iPod or iPhone operation manual 
before making video out setting.
 
 
Using with the AC/DC adaptor
 
Notes:
 
 
Unplug the AC/DC adaptor from the wall socket if the unit will 
not be used for a prolonged period of time.
 
 
Connecting the AC/DC adaptor to the unit disconnects the 
batteries.
 
 
Use only the supplied AC/DC adaptor. Using other AC/DC 
adaptor may cause an electric shock or fire.
 
Make sure to unplug the AC/DC adaptor before making
any connections.
 
1
 
Enter the iPod or iPhone menu.
Touch the TV DISPLAY pad. The E
 
SOUND
 
 LED will blink
twice to display video on the TV screen.
 
2
 
Select the desired video to be played.
 
3
 
Press the 
 button on the iPod unit or touch the
ENTER pad on the remote control to start playback.
V
T
T
U
O
 
O
E
D
I
V
To video
input
socket
Video cable
(not supplied)
 
1
 
Plug the AC/DC adaptor cable into the DC IN socket on
the unit.
 
2
 
Plug the AC/DC adaptor into an wall socket.
2
1
DC IN socket 
(DC 6V)
AC/DC Adaptor Cable
Wall socket
(AC 100 - 240 V ~ 50/60 Hz)
Page of 26
Display

Click on the first or last page to see other DK-AP8P service manuals if exist.