DOWNLOAD Sharp CD-DVD500 (serv.man10) Service Manual ↓ Size: 102.26 KB | Pages: 13 in PDF or view online for FREE

– 22 –

The preparation date display of the program
10000000  ********
                                                   (Last updata)

Model number display
10000001  *******#
                                               (Model number)

The version display of the program
10000002  ********
                                                 (Program ver.)

Reagion number display
10000003  0000000*
                          (Region code:Binary display)

Color bar display

20000001  00000000 (FIP)

Dynamic Test

30000000  00000000

Micro-code number display
10000004  ********
                                              (Microcode ver.)

The preparation date display of the servo program
10000005  ********
                                                     (Servo ver.)

It is returned to the test mode initial image plane.

<The "2" key of the remote controller is pushed.>

<The "3" key of the remote controller is pushed.>

<The "1" key of the remote controller is pushed.>

Test mode initial image plane

F0000000  *00#####

The "Playback" key of the remote controller is pushed.

The "Playback" key of the remote controller is pushed.

The "Playback" key of the remote controller is pushed.

The "Reactivation" key of the remote controller is pushed.

The "Playback" key of the remote controller is pushed.

The "Playback" key of the remote controller is pushed.

The "Stop" key of the remote controller is pushed.

There is no copy guard signal.
As for the symptom when it was
dubbed in the video tape recorder?

It is returned to the test mode initial image plane.

To (1)

Micro-code is the thing of the process 
program of the system integrated circuit.

(* is a region number)
(##### is a program version)

(* is a model number) (# is a region number)
DVD500: 0000500#

(* is a region number)

(Pressing down the DVD/CD button and X-BASS/DEMO button, press POWER button.)

– 23 –

<Disk is put, and the "2" key of the remote controller is pushed.>

*It is usually returned in power source off for the state.

<The "1" key of the remote controller is pushed.>

DVD laser lights, the spindle motor 
rotates and the pickup moves to the 
outer periphery.
30000001   000000DD

<The "1" key of the remote controller is pushed.>

Note: Not to face the light of the laser squarely, 
          caution!

The "PLAY" key input.

The "PLAY" key input.

From (1)

STEP TEST
30000201  00000000

STEP TEST
30000202  00000000

STEP TEST
3000E201  000000EE

When a disk is not in.

RF gain adjustment, Track on

Focus on

The "PLAY" key input.

STEP TEST
30000203  00000000

Focus gain adjustment

The "PLAY" key input.

STEP TEST
30000204  00000000

Track gain adjustment

The "PLAY" key input.

(******** is the sector ID.)

(******** is sub-Q.)

After TOC Reading, 
Follow-up play condition

STEP TEST
30000205  00000000

Focus balance adjustment

Focus balance of the layer 1, 
follow-up play condition after focus gain adjustment 

(In case of CD)

STEP TEST
DD000210  00000000

STEP TEST END
CD000210  ********

STEP TEST
DD000211  00000000

STEP TEST END
DD000212  ********

DVD laser off, CD laser on, spin kick, 
sled outer periphery feed
ErrDisplay0  ErrDisplay1
30000001   000000CD

<The "1" key of the remote controller is pushed.>

<The "1" key of the remote controller is pushed.>

Laser off, spin kick, sled outer periphery 
feed
ErrDisplay0  ErrDisplay1
30000001   00000000

It is returned to the Dynamic test.

The "Stop" key of the remote controller is pushed.

It is returned to the Dynamic test.

The "PLAY" key input.

To (2)

– 24 –

From (2)

PLAY TEST
30000001  00000000

PLAY TEST
DD######*********

SPIN OFFSET

"3" Key input

"TOP MENU" Key input

"3" Key input

Because a tray opens, adisk is published.

It becomes following play state.

(******** is a sector ID.)(###### is a error rate)

A test jump can be done by inputting the following key
from the remote controller.

PLAY TEST
00000000 0000*****

Following playback, jump test mode

Spin offset adjustment mode

1

-1

3

1

4

-102

6

102

7

-510

9

510

Clear

-511

Enter

511

2

-765

Repeat

765

5

-766

A-B

766

8

-7000

Memory

7000

Before skipping.

-15000

After skipping.

15000

         >10                         Layer Jump

Key

Jump

Key

Jump

(**** is a adjustment result.)

It is returned to the Dynamic test.

The"Stop" key of the remote controller is pushed.

AA  BB  CC  DD  EE  FF  GG  HH
Error rate lever ver
1ber=5error

Auto adj value display
AA: Layer0 foeus gain
BB: Layer1 foeus gain
CC: Layer0 foeus balance
DD: Layer1 foeus balance
EE: Tracking gain
FF: Tracking balance
GG: Layer0 RF gain
HH: Layer1 RF gain

– 25 –

Enter test mode 5.

TAPE test mode is displeyd.

Eg: TA TEST1

Press the <       > key or 

the remote control’s

 <T1_PLAY> or <T2_PLAY> key.

T1 PLAY starts. Display

changes to T1 PLAY.

Eg: TA TEST2

T2 F PLAY starts. Display

changes to T2 PLAY 

Eg: TA TEST6

Is it 'AUTO STOP' performed

within 13 sec.?

Is it 'AUTO STOP' performed

within 13 sec.?

Is it 'AUTO STOP' performed

within 13 sec.?

Is it 'AUTO STOP' performed

within 10 sec.?

Is it 'AUTO STOP' performed

within 10 sec.?

T2 R PLAY starts. Display

changes to T2 PLAY.

Eg: TA TEST21

T2 REW starts. Display changes

to T2 REW. Eg: TA

TEST4

T2 FF starts. Display changes

to T2 FF display. Eg: TA

TEST5

 'OK' is displayd. Eg: TA

TEST6

Yes

Yes

Yes

Yes

Yes

Yes

Normally, an operation confirmation mode
functions after entering each operation mode.
When each operation mode cannot be entered,
the STOP operation will be performed and “NG” 
will be displayed.

After performing the STOP operation, 

‘NG’ is displayed.

Eg: TA TEST7

No

No

No

No

No

If T2 FF cannot be confirmed

If T2 REW cannot be confirmed

If T2 R PLAY cannot be confirmed

If T2 F PLAY cannot be confirmed

If T1 PLAY cannot be confiemed

It takes 6 sec. to
detect AUTO
STOP

It take 6 sec. to
detect AUTO
STOP

Need  3 sec. to
detect AUTO
STOP

•  This is a test mode for producing CD-DVD500H. Do not use except when servicing.
Function: - TAPE test mode.