Sharp CD-C491H User Manual / Operation Manual ▷ View online
<P=004>
PREPARATION FOR USE
Right
Left
Red
Red
Black
Black
Black
Red
RATED SPEAKER IMPEDANCE : 8 OHMS MIN.
IMPEDANCE NOMINALE DU
HAUT-PARLEUR : 8 OHMS MINIMUM
IMPEDANCE NOMINALE DU
HAUT-PARLEUR : 8 OHMS MINIMUM
Red
Black
Black
Red
2
1
3
■
Speaker connection
Unplug the AC power lead from the AC socket before con-
necting or disconnecting any components.
necting or disconnecting any components.
For the front, centre and
sub woofer speakers
sub woofer speakers
Red
Black
Length: Approx.
2 m (78-3/4")
2 m (78-3/4")
For the surround speakers
Black
Black (with white line)
Length: Approx.
10 m (393-3/4")
Length: Approx.
10 m (393-3/4")
Front speakers
Connect each front speaker wire to the FRONT SPEAKER ter-
minals as shown.
Use speakers with an impedance of 8 ohms or more, as lower
impedance speakers can damage the unit.
minals as shown.
Use speakers with an impedance of 8 ohms or more, as lower
impedance speakers can damage the unit.
●
Connect the black wire to the minus (-) terminal, and the red
wire to the plus (+) terminal.
wire to the plus (+) terminal.
Centre speaker
Connect the centre speaker wire to the CENTER SPEAKER ter-
minals as shown.
Use a speaker with an impedance of 8 ohms or more, as a lower
impedance speaker can damage the unit.
minals as shown.
Use a speaker with an impedance of 8 ohms or more, as a lower
impedance speaker can damage the unit.
●
Connect the black wire to the minus (-) terminal, and the red
wire to the plus (+) terminal.
wire to the plus (+) terminal.
Wires to be used with each speaker
How to connect the speaker wires
1
Hold the speaker wire release catch down.
2
Insert the wire into the speaker terminal.
3
Release the catch.
Caution:
When connecting the speakers to the unit, connect the wires to
the speakers first, and then to the terminals on the unit.
When connecting the speakers to the unit, connect the wires to
the speakers first, and then to the terminals on the unit.
CD-C491H(SUK) TINSE0229AWZZ
4
<P=005>
(Continued)
Red
Black
Black
Red
RATED SPEAKER IMPEDANCE : 8 OHMS MIN.
IMPEDANCE NOMINALE DU HAUT-PARLEUR :
IMPEDANCE NOMINALE DU HAUT-PARLEUR :
8 OHMS MINIMUM
Right
Left
White
line
line
White
line
line
Sub woofer
Connect the sub woofer wire to the SUB WOOFER terminals as
shown.
Use a speaker with an impedance of 8 ohms or more, as a lower
impedance speaker can damage the unit.
shown.
Use a speaker with an impedance of 8 ohms or more, as a lower
impedance speaker can damage the unit.
●
Connect the black wire to the minus (
−
) terminal, and the red
wire to the plus (+) terminal.
Surround speakers
Connect each surround speaker wire to the SURROUND
SPEAKER terminals as shown.
Use speakers with an impedance of 8 ohms or more, as lower
impedance speakers can damage the unit.
SPEAKER terminals as shown.
Use speakers with an impedance of 8 ohms or more, as lower
impedance speakers can damage the unit.
●
Connect the wire with the white line to the minus (
−
) terminal
and the plain wire to the plus (+) terminal.
Caution:
●
Do not short out the speaker wires. When the power
is on and the speaker wires are shorted out, "PRO-
TECT" will appear and the unit will enter the stand-by
mode. (See page 42.)
is on and the speaker wires are shorted out, "PRO-
TECT" will appear and the unit will enter the stand-by
mode. (See page 42.)
●
Do not reverse the right channel and left channel
wires when connecting the speakers to the unit.
wires when connecting the speakers to the unit.
●
Do not let bare speaker wires touch each other, as this may
damage the amplifier and/or speakers.
damage the amplifier and/or speakers.
●
Do not allow any objects to fall into or to be placed in the bass
reflex ducts.
reflex ducts.
●
Do not stand or sit on the speakers. If the speakers fall or
collapse, you may be injured.
collapse, you may be injured.
CD-C491H(SUK) TINSE0229AWZZ
5
(Continued)
<P=006>
Surround
left
left
Sub
woofer
woofer
Front
left
left
Centre
Front
right
right
Surround
right
right
Surround speaker
Wall
60 - 90 cm
(23" - 35")
(23" - 35")
Example: When installed on the wall
■
Placing the speakers
When you connect this unit to a DVD player playing a disc with
the trademark, you can enjoy realistic, powerful
sound by playing the sound track through 6 channels; the front
left, front right, centre, surround left, surround right and sub
woofer speakers.
the trademark, you can enjoy realistic, powerful
sound by playing the sound track through 6 channels; the front
left, front right, centre, surround left, surround right and sub
woofer speakers.
The best sound will be achieved by placing each speaker the
same distance from the listener. Arrange the speakers so that
the layout is as close as possible to the diagram shown in this
illustration.
same distance from the listener. Arrange the speakers so that
the layout is as close as possible to the diagram shown in this
illustration.
●
Front speakers
The front left and right speakers have individual shapes.
For best performance, place the speakers as shown in the dia-
gram to the left.
Place a TV halfway between the front left and front right speakers.
For best performance, place the speakers as shown in the dia-
gram to the left.
Place a TV halfway between the front left and front right speakers.
●
Centre speaker
It is recommended that the centre speaker be placed on top of
a television.
a television.
●
Sub woofer
Place the sub woofer near one of the front speakers, and orient
it towards the listener as much as possible.
it towards the listener as much as possible.
●
Surround speakers
The surround speakers should be installed on the wall. Install
them 60 - 90 cm (23" - 35") above the height of your ears when
seated, if possible. (See page 7.)
them 60 - 90 cm (23" - 35") above the height of your ears when
seated, if possible. (See page 7.)
When the surround speakers are installed vertically, the speaker
badge will be upside down.
In this case, you can adjust the badge to face the proper direction.
Just turn it by hand.
badge will be upside down.
In this case, you can adjust the badge to face the proper direction.
Just turn it by hand.
Note:
The front speakers, centre speaker, and sub woofer are magnet-
ically shielded. Therefore, they may be placed alongside a TV.
However, some colour variation may occur, depending on the
type of TV used.
The front speakers, centre speaker, and sub woofer are magnet-
ically shielded. Therefore, they may be placed alongside a TV.
However, some colour variation may occur, depending on the
type of TV used.
If colour variations occur ....
turn off the TV (using the power switch). After 15 - 30 minutes,
turn the TV on again.
If the colour variation is still present ...
move the speakers further away from the TV.
turn off the TV (using the power switch). After 15 - 30 minutes,
turn the TV on again.
If the colour variation is still present ...
move the speakers further away from the TV.
Front
left
left
Centre
Front
right
right
Same distance
Example: When installed vertically
Example: When installed horizontally
Badge
CD-C491H(SUK) TINSE0229AWZZ
6
(Continued)
<P=007>
1
2
■
Removing the speaker grilles on the front
speakers
speakers
1
Remove the lower part of the speaker grille first.
2
Remove the upper part of the speaker grille.
Note:
●
The speaker grilles on the other speakers cannot be removed.
Caution:
When the speaker grilles are removed, the speaker diaphragm
will be exposed. Make sure nothing comes into contact with the
diaphragm in the speakers.
When the speaker grilles are removed, the speaker diaphragm
will be exposed. Make sure nothing comes into contact with the
diaphragm in the speakers.
■
Attaching the speaker grilles on the front
speakers
speakers
Align the four posts on the speaker grille with the holes in the
speaker.
Push gently on the grille with the palm of your hand to secure
it.
speaker.
Push gently on the grille with the palm of your hand to secure
it.
■
To mount the surround speakers on the wall
The design of the surround speakers allows them to be hung on
the wall.
Be sure to use the type and size of screw that is shown to the
left.
the wall.
Be sure to use the type and size of screw that is shown to the
left.
1
Make a hole in the wall using a drill.
2
Drive a wall mount plug into the hole using a hammer. Drive
the wall mount plug in until it is flush with the wall surface.
the wall mount plug in until it is flush with the wall surface.
3
Drive one screw into the wall mount plug for each speaker
as shown in the illustration.
as shown in the illustration.
●
Drive the screws, so there is about a 5 mm (3/16") space
between the wall and the head of the screw.
between the wall and the head of the screw.
4
Mount the surround speaker on the wall so that the screw
head is inserted into the slot on the surround speaker.
head is inserted into the slot on the surround speaker.
,
,
32 mm (1-1/4")
1
2
8-9 mm (3/8")
5 mm (3/16")
3.2 mm (1/8")
Min. 22 mm (7/8")
9 mm (3/8")
3
Wall surface
Wall mounting screw
4
Wall surface
CD-C491H(SUK) TINSE0229AWZZ
7
Click on the first or last page to see other CD-C491H service manuals if exist.