Sharp CD-C491H User Manual / Operation Manual ▷ View online
HOW TO USE THE BUILT-IN TIMER
VOLUME
Jog dial
TUNING
( )
( )
FUNCTION
MEMORY
TIMER
REVERSE
MODE
MODE
ON/
STAND-BY
STAND-BY
2
3
4
5
7
8
6
To confirm the timer setting:
Press the TIMER button once.
●
The turn-on time and the turn-off time will be displayed.
To cancel timer operation:
Press the TIMER button repeatedly to turn off the timer, "
f
PLAY" will go out.
To change the programmed contents:
Start again from step 1.
To stop playback during timer playback:
Press the ON/STAND-BY button to enter the stand-by mode.
●
Before setting the timer, make sure that the clock setting
is correct. (Page 10)
is correct. (Page 10)
●
Load the compact disc or cassette for playback, that you
want to control with the timer.
want to control with the timer.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TIMER button once to turn on the timer mode,
"
"
f
PLAY" will appear. At this point, make sure that "
f
REC" is not lit.
3
Within 10 seconds, press the MEMORY button.
●
If more than 10 seconds have passed, start again from
step 1.
step 1.
4
Turn the jog dial to set the hour at which to start, and
then press the MEMORY button.
then press the MEMORY button.
5
Turn the jog dial to set the minute at which to start, and
then press the MEMORY button.
then press the MEMORY button.
6
Set the hour and minute for the OFF time, the same as
described in steps 4 - 5.
described in steps 4 - 5.
7
Press the FUNCTION button to select the desired function
(CD, TUNER, TAPE 1, TAPE 2, DVD 1, VCR 1, DVD 2,
or VCR 2), and then press the MEMORY button.
(CD, TUNER, TAPE 1, TAPE 2, DVD 1, VCR 1, DVD 2,
or VCR 2), and then press the MEMORY button.
●
When the TUNER or TAPE 2 function is selected, go to
step 8.
When any other function is selected, go to step 9.
step 8.
When any other function is selected, go to step 9.
8
When TUNER is selected
Turn the jog dial to select a previously programmed radio
station, and then press the MEMORY button.
station, and then press the MEMORY button.
When TAPE 2 is selected
Press the REVERSE MODE button to select the reverse
mode, and then press the MEMORY button.
mode, and then press the MEMORY button.
9
Rotate the VOLUME control to adjust the sound volume,
and then press the MEMORY button.
and then press the MEMORY button.
10
After the setting has been performed whilst the unit is on,
press the ON/STAND-BY button to enter the stand-by
mode.
press the ON/STAND-BY button to enter the stand-by
mode.
●
The unit will display the time.
11
When the timer start time is reached, timer playback will
start.
start.
●
The volume will increase until it is at the volume level
when the timer was set.
when the timer was set.
12
When the timer end time is reached, timer playback will
stop.
stop.
●
"
f
PLAY" will disappear, and the timer mode will be can-
celled. The unit will enter the stand-by mode.
Notes:
●
Once the time is set, the setting is retained until a new
time is programmed.
time is programmed.
●
The timer cannot control the component connected to the
DVD 1, DVD 2, VCR 1/AUX 1 and VCR 2/AUX 2 sockets.
DVD 1, DVD 2, VCR 1/AUX 1 and VCR 2/AUX 2 sockets.
■
Timer playback
CD-C491H(SUK) TINSE0229AWZZ
36
(Continued)
VOLUME
Jog dial
TUNING
( )
( )
FUNCTION
MEMORY
TIMER
REVERSE
MODE
MODE
ON/
STAND-BY
STAND-BY
2
3
4
5
7
8
9
6
■
Timer recording
●
Before setting the timer, make sure that the clock setting
is correct. (Page 10)
is correct. (Page 10)
●
Load a cassette for recording into the TAPE 2 cassette
compartment.
compartment.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TIMER button to turn on the timer mode, "
f
REC" will appear.
3
Within 10 seconds, press the MEMORY button.
●
If more than 10 seconds have passed, start again from
step 1.
step 1.
4
Turn the jog dial to set the hour at which to start, and
then press the MEMORY button.
then press the MEMORY button.
5
Turn the jog dial to set the minute at which to start, and
then press the MEMORY button.
then press the MEMORY button.
6
Set the hour and minute for the OFF time, the same as
described in steps 4 - 5.
described in steps 4 - 5.
7
Press the FUNCTION button to select the desired func-
tion (CD, TUNER, TAPE 1, TAPE 2, DVD 1, VCR 1, DVD
2, or VCR 2), and then press the MEMORY button.
tion (CD, TUNER, TAPE 1, TAPE 2, DVD 1, VCR 1, DVD
2, or VCR 2), and then press the MEMORY button.
●
When the TUNER function is selected, go to step 8.
When the CD, TAPE 2, DVD 1, VCR 1, DVD 2, or VCR
2 function is selected, go to step 9.
When the TAPE 1 function is selected, go to step 10.
When the CD, TAPE 2, DVD 1, VCR 1, DVD 2, or VCR
2 function is selected, go to step 9.
When the TAPE 1 function is selected, go to step 10.
8
When TUNER is selected
Turn the jog dial to select a previously programmed radio
station, and then press the MEMORY button.
station, and then press the MEMORY button.
9
Press the REVERSE MODE button to select the reverse
mode, and then press the MEMORY button.
mode, and then press the MEMORY button.
10
After the setting has been performed whilst the unit is
on, press the ON/STAND-BY button to enter the stand-by
mode.
on, press the ON/STAND-BY button to enter the stand-by
mode.
●
The unit will display the time.
11
When the timer start time is reached, timer recording will
start.
start.
●
The volume will increase until it is at volume level 30.
12
When the timer end time is reached, timer recording will
stop.
stop.
●
"
f
REC" will disappear, and the timer mode will be can-
celled.
Notes:
●
Once the time is set, the setting is retained until a new
time is programmed.
time is programmed.
●
The timer cannot control the component connected to the
DVD 1, DVD 2, VCR 1/AUX 1 and VCR 2/AUX 2 sockets.
DVD 1, DVD 2, VCR 1/AUX 1 and VCR 2/AUX 2 sockets.
To confirm the timer setting:
Press the TIMER button once.
●
The turn-on time and the turn-off time will be displayed.
To cancel timer operation:
Press the TIMER button repeatedly to turn off the timer, "
f
REC" will go out.
To change the programmed contents:
Start again from step 1.
CD-C491H(SUK) TINSE0229AWZZ
37
(Continued)
SLEEP
MEMORY
Jog dial
1
2
4
3
Sleep timer setting
Timer playback setting
Start time
(Wake-up start)
(Wake-up start)
Sleep operation will
automatically stop.
automatically stop.
1 minute - 2 hours
Desired time
End time
(Wake-up end)
(Wake-up end)
■
Sleep operation
The radio, compact disc and cassette deck can all be turned
off automatically.
off automatically.
1
Play back the desired sound source.
2
Press the SLEEP button.
●
The sleep timer is initially set to 2 hours.
To change the sleep time:
Whilst the sleep time is displayed, every time the jog dial is
turned, the time will decrease by the following intervals.
(Maximum: 2 hours - Minimum: 1 minute)
turned, the time will decrease by the following intervals.
(Maximum: 2 hours - Minimum: 1 minute)
3
Within 5 seconds, press the MEMORY button.
4
The unit will enter the stand-by mode automatically after
the preset sleep time has elapsed.
the preset sleep time has elapsed.
Note:
●
Once the sleep time is set, it will remain the same duration
until the setting is changed.
until the setting is changed.
To confirm the sleep timer setting:
Press the SLEEP button.
To cancel the sleep operation:
Press the SLEEP button until "SLEEP" disappears.
■
Simultaneous sleep and timer operation
The sound source selected for the sleep operation will be
used for the timer operation.
(Different sound sources cannot be selected for the sleep
operation and the timer operation.)
used for the timer operation.
(Different sound sources cannot be selected for the sleep
operation and the timer operation.)
1
Start the sleep operation.
2
Prepare for timer playback.
(Perform steps 2 - 6 on page 36.)
(Perform steps 2 - 6 on page 36.)
3
When the preset sleep time has elapsed, the unit will
automatically enter the stand-by mode.
automatically enter the stand-by mode.
4
When the timer preset time is reached, timer playback
will start.
will start.
Caution:
●
When using the cassette deck, be sure the tape length is
long enough to perform both functions.
If you want to sleep and wake up listening to a tape, and
the length of the tape is shorter than the sleep timer set-
ting, timer playback will not be possible.
long enough to perform both functions.
If you want to sleep and wake up listening to a tape, and
the length of the tape is shorter than the sleep timer set-
ting, timer playback will not be possible.
CD-C491H(SUK) TINSE0229AWZZ
38
EXTERNAL UNIT CONNECTION
■
Leads required to connect an external unit
When external units are connected, the following, commercially available leads are needed.
Audio signal
Optical digital lead
Coaxial digital lead
RCA lead
Video signal
Video lead
■
When connecting the unit to a DVD player
When connecting an audio signal using an optical digital lead
To the video input socket
TV
To the video output socket
To the audio (line)
output sockets
output sockets
To the audio (digital)
output socket
output socket
DVD player
When connecting an audio signal using a coaxial digital lead
To the video input socket
TV
To the video output socket
To the audio (line)
output sockets
output sockets
To the audio (digital)
output socket
output socket
DVD player
Caution: A DVD player allows you to select the "PCM" or "DOLBY DIGITAL" audio output mode. Before playing a Dolby
digital sound disc, be sure to set the unit in the "DOLBY DIGITAL" mode. For more details, see the operation
manual for your DVD player.
manual for your DVD player.
CD-C491H(SUK) TINSE0229AWZZ
39
Click on the first or last page to see other CD-C491H service manuals if exist.