Sharp CD-C491H User Manual / Operation Manual ▷ View online
(Continued)
ON/
STAND-BY
STAND-BY
TUNER
(BAND)
(BAND)
ASPM
(4 seconds)
(4 seconds)
■
ASPM (Auto Station Program Memory)
It is recommended that you store stations in memory using
ASPM.
(This memory can be used for PTY searches and EON
switching.)
When the ASPM button is pressed, whilst tuned to the FM
band, the RDS (Radio Data System) function will automati-
cally search for new RDS stations. Up to 40 stations can be
stored in memory. (If you have already stored some stations
in memory, the number of new stations you can store will
be less.)
ASPM.
(This memory can be used for PTY searches and EON
switching.)
When the ASPM button is pressed, whilst tuned to the FM
band, the RDS (Radio Data System) function will automati-
cally search for new RDS stations. Up to 40 stations can be
stored in memory. (If you have already stored some stations
in memory, the number of new stations you can store will
be less.)
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button.
3
Press the TUNER (BAND) button to select the FM ST or
FM band.
FM band.
4
Press and hold down the ASPM button for at least 3
seconds.
seconds.
①
After "ASPM" has flashed for about 4 seconds, scanning
will start. (87.50 - 108.00 MHz )
will start. (87.50 - 108.00 MHz )
②
When an RDS station is found, the RDS will appear for
a short time and the station will be stored in memory.
a short time and the station will be stored in memory.
③
After scanning, the number of stations that have been
automatically stored in memory will be displayed for 4
seconds, and then "END" will appear for 4 seconds.
automatically stored in memory will be displayed for 4
seconds, and then "END" will appear for 4 seconds.
Notes:
●
Only RDS stations will be stored in memory.
●
If the same station is broadcasting on different frequen-
cies, the transmission with the strongest broadcast fre-
quency will be stored in memory.
cies, the transmission with the strongest broadcast fre-
quency will be stored in memory.
●
Any station which has the same frequency as one which
has been already stored in memory will not be stored
again.
has been already stored in memory will not be stored
again.
●
If a 40th station is stored in memory during a scan, the
scanning will stop at that station. The number of stations
and "END" will each be displayed for 4 seconds.
scanning will stop at that station. The number of stations
and "END" will each be displayed for 4 seconds.
●
If no stations have been stored in memory, "END" will
flash for about 4 seconds.
flash for about 4 seconds.
●
If 40 stations have already been stored in memory and
the ASPM button is pressed, "END" will appear im-
mediately and the scan will be aborted.
If you want to redo the ASPM operation from the begin-
ning, erase the preset memory, and then perform steps 1
- 4.
the ASPM button is pressed, "END" will appear im-
mediately and the scan will be aborted.
If you want to redo the ASPM operation from the begin-
ning, erase the preset memory, and then perform steps 1
- 4.
To stop the ASPM operation before it is complete:
Press the ASPM button whilst it is scanning for stations.
●
The stations that have already been stored in memory will
be kept there.
be kept there.
To erase all of the contents of preset memory:
The unit is in the stand-by mode.
Hold down the TUNER button and the
Hold down the TUNER button and the
■
button, and then
press the ON/STAND-BY button.
●
"TUNER CL" will appear.
●
After performing this operation, all of the preset memory
information will be erased.
information will be erased.
CD-C491H(SUK) TINSE0229AWZZ
20
(Continued)
ON/
STAND-BY
STAND-BY
TUNER
(BAND)
(BAND)
PTY.TI
SEARCH
SEARCH
PTY.TI
PRESET
TUNER
(BAND)
(BAND)
ON/STAND-BY
Jog dial
4
5
6
■
To recall stations that have been stored in
memory (PTY search)
memory (PTY search)
You can select a group of stations by specifying the pro-
gramme type (news, sports, traffic programme, etc. ... see
page 19) from among the stations that have been stored in
memory.
(ASPM is convenient for storing stations in memory.)
gramme type (news, sports, traffic programme, etc. ... see
page 19) from among the stations that have been stored in
memory.
(ASPM is convenient for storing stations in memory.)
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button.
3
Press the TUNER (BAND) button to select the FM ST or
FM band.
FM band.
4
Press the PTY.TI SEARCH button.
●
"PTY.TI" and "SELECT" will appear alternately for about
4 seconds.
4 seconds.
5
Within 4 seconds, turn the jog dial on the main unit or
press the
press the
X
or
W
button on the remote control to select
the programme type you want.
NEWS
DRAMA
ROCK M
ALARM
DRAMA
ROCK M
ALARM
AFFAIRS
CULTURE
M.O.R. M
TP*
CULTURE
M.O.R. M
TP*
INFO
SCIENCE
LIGHT M
TA
SCIENCE
LIGHT M
TA
SPORT
VARIED
CLASSICS
VARIED
CLASSICS
EDUCATE
POP M
OTHER M
POP M
OTHER M
Programme type:
●
Each time the button on the remote control is pressed the
programme type will appear in order as shown above. If
the button is held down for more than 0.5 seconds the
programme type will continuously change.
programme type will appear in order as shown above. If
the button is held down for more than 0.5 seconds the
programme type will continuously change.
6
Whilst the selected programme type is flashing (within 4
seconds), press the PTY.TI SEARCH button again.
seconds), press the PTY.TI SEARCH button again.
●
After the name of the selected programme type has been
lit for 2 seconds, "SEARCH" will appear, and the search
operation will start.
lit for 2 seconds, "SEARCH" will appear, and the search
operation will start.
Note:
If the programme type has changed from flashing to steadily
lit and the PTY.TI SEARCH button is pressed, nothing will
happen. In this case, start again from step 4.
Each time a station of the programme type you want is en-
countered, you will be able to listen to the broadcast.
The channel number will flash for about 3 seconds. The sta-
tion name will flash for 7 seconds, and then remain lit.
If the programme type has changed from flashing to steadily
lit and the PTY.TI SEARCH button is pressed, nothing will
happen. In this case, start again from step 4.
Each time a station of the programme type you want is en-
countered, you will be able to listen to the broadcast.
The channel number will flash for about 3 seconds. The sta-
tion name will flash for 7 seconds, and then remain lit.
●
If you want to listen to another station of that programme
type, press the PTY.TI SEARCH button whilst the channel
number or station name is flashing. The unit will look for
the next station of that type.
type, press the PTY.TI SEARCH button whilst the channel
number or station name is flashing. The unit will look for
the next station of that type.
Note:
●
If no station of the programme type you want can be found,
"NOT FOUND" will appear for 4 seconds.
"NOT FOUND" will appear for 4 seconds.
★
If you have selected the traffic programme:
If you select traffic programme (TP) as the programme type
in step 5, to receive only radio stations which broadcast traffic
programmes, the TP will appear. (However, this does not
necessarily mean that you will hear any traffic announce-
ments at that time.)
When a traffic announcement is actually being made, the TA
will appear.
(When both the TP and TA will appear, an announcement
is being made.)
in step 5, to receive only radio stations which broadcast traffic
programmes, the TP will appear. (However, this does not
necessarily mean that you will hear any traffic announce-
ments at that time.)
When a traffic announcement is actually being made, the TA
will appear.
(When both the TP and TA will appear, an announcement
is being made.)
CD-C491H(SUK) TINSE0229AWZZ
21
(Continued)
Jog dial
DISPLAY
MODE
MODE
■
To manually recall the stations stored in
memory
memory
Each time you turn the jog dial one step the channel number
will change.
will change.
●
After the channel number has been displayed for 2 sec-
onds, the frequency for that channel will appear for 2 sec-
onds, and then the station name will appear.
onds, the frequency for that channel will appear for 2 sec-
onds, and then the station name will appear.
■
To switch the display:
Each time the DISPLAY MODE button is pressed whilst an
FM station is tuned in, the display will switch as follows:
FM station is tuned in, the display will switch as follows:
Station name (PS)
→
Programme type (PTY)
→
Frequency
■
Notes for RDS operation
If any of the following events occur, it does not mean that
the unit is faulty.
the unit is faulty.
●
"PS" and a station name appear alternately, and the unit
does not operate properly.
does not operate properly.
●
If a particular station is not broadcasting properly or a sta-
tion is conducting tests, the RDS reception function may
not work properly.
tion is conducting tests, the RDS reception function may
not work properly.
When the station you are tuning in is not an RDS station or
even if it is an RDS station but there is no station name or
programme type information available, the display will switch
as follows:
even if it is an RDS station but there is no station name or
programme type information available, the display will switch
as follows:
"NO PS"
→
"NO PTY"
→
Frequency
Notes:
●
"NO PS" or "NO PTY" will flash for about 5 seconds, and
then the frequency will be displayed.
then the frequency will be displayed.
●
The display can only be switched whilst tuned to the FM
band.
band.
CD-C491H(SUK) TINSE0229AWZZ
22
(Continued)
PTY.TI
SEARCH
SEARCH
Jog dial
EON
1
2
3
4
5
■
EON-PTY
1
Tune in the desired RDS station, then the PS name will
be displayed.
be displayed.
2
Press the EON button when "EON" appears.
●
"PTY.TI" and "SELECT" will appear alternately for about
4 seconds.
4 seconds.
3
Whilst they are being displayed, select the desired pro-
gramme type turning the jog dial.
gramme type turning the jog dial.
●
The selected programme type will flash.
4
Within 4 seconds, press the PTY.TI SEARCH button.
●
The programme type and "WAITING" will be displayed for
2 seconds each.
2 seconds each.
●
"PTY" will appear, and the unit will enter the EON-PTY
stand-by mode.
stand-by mode.
5
When a programme of the type specified starts on an ON
(other network) station, the unit will automatically switch
to the station broadcasting the selected programme type,
and "PTY" will flash.
(other network) station, the unit will automatically switch
to the station broadcasting the selected programme type,
and "PTY" will flash.
6
When the programme specified for the ON station is over,
the unit will automatically return to the original station you
were tuned to.
the unit will automatically return to the original station you
were tuned to.
Note:
●
If the EON button is pressed when "EON" is not displayed,
"NO EON" will appear for 4 seconds to indicate that the
unit cannot enter the EON stand-by mode.
"NO EON" will appear for 4 seconds to indicate that the
unit cannot enter the EON stand-by mode.
Checking the stand-by mode setting:
When in the EON stand-by mode, press the EON button.
("Programme type"
("Programme type"
→
"WAITING")
To cancel the EON stand-by mode:
When in the EON stand-by mode, press the EON button.
Within 4 seconds, press it again. The EON stand-by mode
will be cancelled.
Within 4 seconds, press it again. The EON stand-by mode
will be cancelled.
●
"PTY" will go out.
Notes:
In the following cases, the EON stand-by mode will be can-
celled.
In the following cases, the EON stand-by mode will be can-
celled.
●
When the unit is set in the stand-by mode
●
When the unit is switched to another band in the EON stand-by
mode
mode
●
When you change the FM station whilst in the EON stand-by mode
●
When a preset call is made
About the TP and TA indicators
TP indicator
TA indicator
Meaning
Not lit
Not lit
This programme does not carry traffic announcements nor does it refer,
via EON, to a programme that does.
via EON, to a programme that does.
Not lit
Lit
This programme carries EON information about another programme
which gives traffic information.
which gives traffic information.
Lit
Not lit
This programme carries traffic announcements but none are being
broadcast at present and may also carry EON information about other
traffic announcements.
broadcast at present and may also carry EON information about other
traffic announcements.
Lit
Lit
A traffic announcement is being broadcast on this programme at present.
CD-C491H(SUK) TINSE0229AWZZ
23
Click on the first or last page to see other CD-C491H service manuals if exist.