DOWNLOAD Sharp CD-BA1700 Service Manual ↓ Size: 1.2 MB | Pages: 36 in PDF or view online for FREE

Model
CD-BA1700
Pages
36
Size
1.2 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Audio / System
File
cd-ba1700.pdf
Date
PREV: Sharp CD-BA160 (serv.man21) Service Manual / Technical Bulletin

Sharp CD-BA1700 User Manual / Operation Manual ▷ View online

29
(Continued)
 Dubbing from tape to tape
1
Press the ON/STAND-BY button to turn the power
on.
2
Load a prerecorded cassette into the TAPE 1 cas-
sette compartment. Insert a blank tape into the
TAPE 2 cassette compartment.
 It is recommended that the recording tape is the same
length as the master tape.
3
Press the TAPE (1   2) button until "TAPE 1"
appears in the display.
4
Press the REC PAUSE (
) button.
5
Press the   /   (TAPE 2  ) button.
To stop dubbing:
Press the   (TAPE  ) button.
 TAPE 1 and TAPE 2 will simultaneously stop.
 Erasing recorded tapes
 Make sure that TAPE 1 is not in use.
1
Load the tape to be erased into the TAPE 2 cassette
compartment.
2
Press the TAPE (1   2) button until "TAPE 2"
appears in the display.
3
Press the REC PAUSE (
) button.
4
Press the   /   (TAPE 2  ) button.
TAPE
TAPE 2
ON/            
STAND-BY
TAPE(1   2)
REC PAUSE
TAPE
(1   2) 
    ON/            
STAND-BY
TAPE 1
TAPE 2
PUSH
EJECT
PUSH
EJECT
30
HOW TO USE THE BUILT-IN TIMER
 Timer playback
 
1
Press the ON/STAND-BY button to turn the power
on.
2
Press the CD, TUNER (BAND), TAPE (1   2) or
VIDEO/AUX button to select the desired function,
and then adjust the sound volume using the VOL-
UME buttons.
3
Press the TIMER/SLEEP button repeatedly until a
white " " is displayed.
 The timer set indicator will flash.
4
Press the TUNING/TIME (  or  ) button to set the
hour start time, then press the MEMORY/SET but-
ton.
 
5
Press the TUNING/TIME (  or  ) button to set the
minute start time, then press the MEMORY/SET but-
ton.
 The unit will enter the stand-by mode automatically, and
the timer set indicator will light up.
6
When the preset time is reached, the timer playback
will start.
 The volume will increase gradually.
7
If you select CD or TAPE, the unit will enter the
stand-by mode after the playback. If you select
TUNER or VIDEO/AUX, it will enter the stand-by
mode one hour after the timer playback starts.
To cancel timer operation:
Press the ON/STAND-BY button to turn the power on.
To change the programmed contents:
Start again from step 1.
Notes:
 When performing timer playback using an external unit
connected to the VIDEO/AUX sockets, only the power of
the main unit will enter the stand-by mode automatically.
(The power of the external unit will not be turned off.)
 Once the time is set, the setting will be retained until a
new time is entered.
The unit will turn on and play the selected source at the pre-
set time.
 Before setting the timer, make sure that the clock setting
is correct (page 10).
(Main unit operation)
ON/
STAND-BY
TIMER/
SLEEP
CD
TUNER/(BAND)
TAPE
(1
2)
VIDEO
/AUX
MEMORY/SET
VOLUME
TUNING/
TIME
(
)
31
(Continued)
 Timer recording
 
1
Press the ON/STAND-BY button to turn the power
on.
 Load a cassette for recording into the TAPE 2 cassette
compartment.
2
Press the TUNER (BAND) or VIDEO/AUX button to
select the desired function, and then adjust the
sound volume using the VOLUME buttons.
3
Press the TIMER/SLEEP button repeatedly until a
red " " is displayed.
 The timer set indicator will flash.
4
Press the TUNING/TIME (  or  ) button to set the
hour start time, then press the MEMORY/SET but-
ton.
 
5
Press the TUNING/TIME (  or  ) button to set the
minute start time, then press the MEMORY/SET but-
ton.
 The unit will enter the stand-by mode automatically, and
the timer set indicator will light up.
6
When the preset time is reached, the timer recording
will start.
 The volume will increase gradually.
7
When the recording tape reaches its end, the timer
recording will end, and the unit will enter the stand-
by mode.
To cancel timer operation:
Press the ON/STAND-BY button to turn the power on.
To change the programmed contents:
Start again from step 1.
Notes:
 When performing timer recording using an external unit
connected to the VIDEO/AUX sockets, only the power of
the main unit will enter the stand-by mode automatically.
(The power of the external unit will not be turned off.)
 Once the time is set, the setting will be retained until a
new time is entered.
The unit will turn on and start recording from the radio at the
preset time.
 Before setting the timer, make sure that the clock setting
is correct (page 10).
(Main unit operation)
ON/
STAND-BY
TIMER/
SLEEP
TUNER/(BAND)
VIDEO
/AUX
MEMORY/SET
VOLUME
TUNING/
TIME
(
)
32
(Continued)
 Sleep operation
 
1
Play back the desired sound source.
2
Press the TIMER/SLEEP button repeatedly until
"SLEEP" is displayed.
To change the sleep time:
Whilst the sleep time is displayed, press the TUNING/TIME
(  or  ) button to adjust the time. (Maximum: 3 hours - Min-
imum: 1 minute) The amount of sleep time can also be
changed during the sleep operation.
 3 hours - 5 minutes   5-minute intervals
 5 minutes - 1 minute   1-minute intervals
3
Press the MEMORY/SET button.
4
The unit will enter the stand-by mode automatically
after the preset sleep time has elapsed.
 The volume will be turned down 1 minute before the
sleep operation finishes.
Note:
 Once the sleep time is set, it will remain the same dura-
tion until the setting is changed.
 
To confirm the remaining sleep time:
Press the TIMER/SLEEP button.
To cancel the sleep operation:
Press the ON/STAND-BY button to enter the stand-by
mode.
The radio, compact disc and cassette deck can all be
turned off automatically.
(Main unit operation)
TIMER/
SLEEP
TUNING/
TIME
(
MEMORY/
SET
)
Page of 36
Display

Click on the first or last page to see other CD-BA1700 service manuals if exist.

RANDOM: