DOWNLOAD Sharp CD-BA1700 Service Manual ↓ Size: 1.2 MB | Pages: 36 in PDF or view online for FREE

 Disc number selection

 The next disc playback will begin, after which each fol-

lowing disc will be played sequentially.

 When the DISC SKIP button is pressed during playback,

playback will begin automatically from the next disc. (It is
not necessary to press the   /   (   ) button.)

 When one of the disc number buttons (  1 -   3) is

pressed during playback, playback of the selected disc
will begin automatically. (It is not necessary to press the

 /   (   ) button.)

 Cue and review

 When the end of the disc is reached whilst cueing, "END"

will appear in the display and CD operation will be
paused. (Even though the next disc has been loaded, the
disc will not be switched.) Press the 

 button for fast

reverse or press the   (CD  ) button to stop CD opera-
tion.

 If the beginning of the disc is reached whilst reviewing,

the mode will automatically switch to normal playback at
that point.

 APSS (Auto Program Search System)

APSS automatically locates the beginning of any track.

To listen again to the track being played:
Press the 

 button for less than 0.5 seconds during play-

back.

To move to the beginning of the next track:
Press the 

 button for less than 0.5 seconds during play-

back.

 To skip a number of tracks at one time, press the 

 or

 button repeatedly until the desired track number is

shown.

 To start playback from a desired track, press the 

 or

 button whilst in the stop mode to select the track

number, and then press the   /   (   ) button.

 APSS can only search for music on a single disc.

 APMS (Automatic Programmable Music 

You can playback the tracks on the CDs in the disc 1 - 3
positions in any order. By specifying the disc numbers from
1 to 3, and the track numbers from 1 to 99, you can choose
up to 32 selections for playback in the order you like.

 "MEMORY" will appear to show that the programmed

sequence is being entered into memory.

 If you make a mistake whilst in the programming mode

("MEMORY" will appear) or if you wish to change your
selections, the programmed tracks can be cleared by
pressing the CLEAR button on the remote control. The
tracks will be cleared sequentially, starting with the last
track entered.

To clear the programmed selections:
Press the CLEAR button on the remote control whilst the
disc is stopped.

 Each time the button is pressed, one track will be

cleared, beginning with the last track programmed.

 Opening the disc tray automatically cancels the pro-

grammed sequence.

 Even if you press the ON/STAND-BY button to enter the

stand-by mode or the function is changed from CD to
some other function, the programmed selections will not
be cleared.

 During APMS operation, random play is not possible.

Selected disc number

Selected track number

Playback order

MEMORY

Total number of tracks

 Repeat play

All tracks on up to 3 discs, or a programmed sequence can
be continuously repeated.

To repeat all tracks on up to 3 discs:
Press the   /   (   ) button twice.

 " " will appear.

To repeat a programmed sequence:
1

Programme a sequence of up to 32 tracks.

2

Press the   /   (   ) button twice.

 " " will appear.

To cancel repeat play:
Press the   /   (   ) button again.
 " " will go out.

 When using repeat play, be sure to press the   (CD  )

button after you are through listening. Otherwise, the
CD(s) will play continuously.

 Random play

(Remote control operation)
The tracks on the disc(s) can be played in random order
automatically.

 "R" will appear.

 If you press the 

 button during random play, you can

move to the next track. On the other hand, the 

 button

does not allow you to move to the previous track. The
beginning of the track being played will be located.

 When using random play, be sure to press the   (CD  )

button after you are through listening. Otherwise, the
disc(s) will play continuously.

 In random play, the unit will select and play tracks auto-

matically. (You cannot select the order of the tracks.)

To cancel random play:
Press the   /   (   ) button.

 "R" will go out.

Repeat play indicator

 Do not carry the unit with discs left in the disc tray.

 Do not place two CDs in one disc position.
 Do not push the disc tray whilst it is moving.
 Do not turn the disc tray by hand. This may cause mal-

functions.

 If the power fails whilst the tray is open, wait until the

power is restored.

 If the disc tray is stopped forcibly, "ERR" will appear in

the display and the unit will not function. If this occurs,
press the ON/STAND-BY button to enter the stand-by
mode and then turn the power on again.

 If TV or radio interference occurs during CD operation,

move the unit away from the TV or radio.

 If a disc is damaged, dirty, or loaded upside down, the

disc will be skipped and the next disc will automatically
play.

 Tuning

 

Manual tuning:
Press the TUNING/TIME (  or  ) button as many times as
required to adjust the frequency shown on the display to the
frequency of the desired station.

Auto tuning:
When the TUNING/TIME (  or  ) button is pressed for
more than 0.5 seconds, scanning will start automatically
and the tuner will stop at the first receivable broadcast sta-
tion.

 When radio interference occurs during auto scan tuning,

auto scan tuning may stop automatically at that point.

 If a weak station signal is found during auto scan tuning,

the station will be skipped.

 To stop the auto tuning, press the TUNING/TIME (  or

) button again.

 When an RDS (Radio Data System) station is tuned in,

the frequency will be displayed first, and then the RDS
indicator will light. Finally, the station name will appear.

 " " will appear when an FM broadcast is in stereo.

 The reception changes to monaural, the sound becomes

clearer.

 
After use:
Press the ON/STAND-BY button to enter the stand-by
mode.

 The last station tuned in will be recalled, even after

changing the tuning band or the function, or after switch-
ing the unit to the stand-by mode.