Panasonic KX-TGF310RUM / KX-TGF320RUM / KX-TGF320UCM / KX-TGFA30RUM Service Manual ▷ View online
49
KX-TGF310RUM/KX-TGF320RUM/KX-TGF320UCM/KX-TGFA30RUM
(N) Audio Check and
Confirmation
(for UC)
(for UC)
-
1. Link to BASE which is connected to Line Simulator.
2. Set line voltage to 48 V and line current to 50 mA.
3. Input -45 dBm (600
2. Set line voltage to 48 V and line current to 50 mA.
3. Input -45 dBm (600
)/1 kHz to MIC of Handset. Measure the Level at Line I/F
and distortion level.
4. Confirm that the level is -2.5 dBm (for UC) and that the distortion level is < 5 %
at TEL Line (600
Load).
5. Input -20 dBm (600
)/1 kHz to Line I/F. Measure the Level at Receiver of
Handset and distortion level (Receive volume set to second position from
minimum).
minimum).
6. Confirm that the level is -23.0 dBm ± 4 dB and that the distortion level is < 5 %
at Receiver (34
Load).
IC1, C12, C11,
C13, MIC,
R23, R24,
R23, R24,
R25, RA4,
C70, C71
(O) SP phone Audio Check
and Confirmation
-
1. Link to Base which is connected to Line Simulator.
2. Set line voltage to 48 V and line current to 50 mA.
3. Set the handset off-hook using SP-Phone key.
4. Input -30 dBm (600
2. Set line voltage to 48 V and line current to 50 mA.
3. Set the handset off-hook using SP-Phone key.
4. Input -30 dBm (600
)/1 KHz to Line I/F and measure Receiving level at SP+
and SP-.
5. Confirm that the level is -7 dBm ± 3 dB and that the distortion level is < 5 %.
(vol = Max at SP (8
Load))
IC1, C78, C79,
R76, R77
Items
Check
Point
Procedure
Check or
Replace Parts
50
KX-TGF310RUM/KX-TGF320RUM/KX-TGF320UCM/KX-TGFA30RUM
10 Disassembly and Assembly Instructions
10.1. Disassembly Instructions
10.1.1. Base Unit
10.1.1.1. KX-TGF310/320
Cabinet Cover
ձ
Remove 8 screw to remove
the cabinet cover.
the cabinet cover.
8 screws
51
KX-TGF310RUM/KX-TGF320RUM/KX-TGF320UCM/KX-TGFA30RUM
ղ
Remove screws and solders
to remove the Jack Holder.
to remove the Jack Holder.
ղ
Main P.C. board
Solders
Jack holder
2 screws
52
KX-TGF310RUM/KX-TGF320RUM/KX-TGF320UCM/KX-TGFA30RUM
LCD Connector
Unsolder to remove the Main P.C.Board
Main P.C. board
Solders
4
Take out the LCD connector from Main P.C.
board
board
4
Solders
Remove screw to remove Hook Switch P.C.Board
5
1 screw
5
Hook Switch P.C.Board
Main P.C. board
Click on the first or last page to see other KX-TGF310RUM / KX-TGF320RUM / KX-TGF320UCM / KX-TGFA30RUM service manuals if exist.