DOWNLOAD Panasonic KX-TG8095RUJ / KX-TG8095RUS / KX-TG8095RUT / KX-TGA807RUJ / KX-TGA807RUS / KX-TGA807RUT / KX-TGA809RUS / KX-TGA809RUT Service Manual ↓ Size: 2.65 MB | Pages: 69 in PDF or view online for FREE

17

Battery Charge (P.13)

18

19

ex.)

(*1) Refer to Registering a Handset to a Base Unit (P.16). If a Handset is already registered to a Base Unit, you do not have to
register it again.
(*2) When you enter the address or New Data, please refer to the table on the next page.
(*3) When copying the last digit, press [#] to left-shift the whole address string by 1 digit and duplicate the last digit to the right.
To change the copied hex. digit (A-F) to other hex. digit, press [ ] several times until desired hex. digit appears. In this case, the
table on the next page is not applicable.
ex.) When entering “0 x 00EC”, press the keys in the following order.
1. Press [ ] x 5.
2. Press [#].
3. Press [ ] x 4.
(*4) Refer to step 6 in the “Base Unit” section (P.18) in Engineering Mode.
(*5) Refer to How to Clear User Setting (P.23).

C-ID (FSK) sensitivity

0x0135

0x35

When  reducing "35" (hex) from default value,
sensitivity increases.

C-ID (DTMF) sensitivity

0x061D

0x02

When increasing "02" (hex) from default value,
sensitivity increases.

Frequency for BBIC: Ref_CL

0x0132

depends on each unit Use these items in a READ-ONLY mode to 

confirm the contents. Careless rewriting may
cause serious damage to the computer system.

ID of Base Unit: RFPI (*4)

0x011F to 0x0123

depends on each unit.

ID of restored H/S on 
Base Unit: IPEI
  H/S #1
         #2
         #3
         #4
         #5 

0x0000 to 0x0004

0x0028 to 0x002C

0x0050 to 0x0054

0x0078 to 0x007C
0x00A0 to 0x00A4

depends on each unit. The number of H/S depends on the model 

number. 

Bell length

0x0292

6 sec: 0x3C

This is time until bell stops ringing. 
(Unit: 100ms)

Reference Voltage level: RVREF

0x0130

depends on each unit.

-

BBIC Version check (*4)

-

EEPROM Version check

0x0187

depends on each unit.

-

All parameters reset; user setting 

→ factory default, User OGM, Caller ID, Registration ID → clear (*5)

20

0

0

A

[ ]  x  1

1

1

B

[ ]  x  2

.

.

C

[ ]  x  3

.

.

D

[ ]  x  4

.

.

E

[ ]  x  5

9

9

F

[ ]  x  6