Panasonic PT-VMZ60 / PT-VMZ50 / PT-VMZ40 / PT-VMW60 / PT-VMW50 (serv.man3) Service Manual ▷ View online
INF-7
SECTION 1 SERVICE INFORMATION
<VMZ60/VMZ50/VMZ40/VMW60/VMW50>
2. Menu Navigation
On-screen menu
The on-screen menu (menu screen) is used to perform various settings and adjustments of the projector.
Navigating through the menu
Operating procedure
button
1) Press the <MENU> button on the remote control or the control panel.
f
The main menu screen appears.
POSITION
PICTURE
PT-VMZ50
PICTURE MODE
STANDARD
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR TEMPERATURE
BRIGHTNESS
SHARPNESS
COLOR TEMPERATURE
DEFAULT
GAMMA
ADVANCED MENU
ADVANCED MENU
AUTO
OFF
OFF
1280x768/60
DAYLIGHT VIEW
DYNAMIC CONTRAST
DYNAMIC CONTRAST
RGB-SYSTEM
LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
SECURITY
NETWORK
ENTER
SELECT
RETURN
FUNCTION
ASSIGNED FUNCTION:
DISABLE
RGB/YP
B
P
R
2) Press as to select an item from the main menu.
f
The selected item is highlighted in yellow.
POSITION
PICTURE
PT-VMZ50
LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
SECURITY
NETWORK
ENTER
SELECT
RETURN
FUNCTION
ASSIGNED FUNCTION:
DISABLE
AUTO
AUTO
AUTO
AUTO
ON
BLUE
ON
BLUE
DEFAULT LOGO
ON-SCREEN DISPLAY
HDMI SIGNAL LEVEL
DIGITAL LINK SIGNAL LEVEL
CLOSED CAPTION SETTING
DIGITAL LINK SIGNAL LEVEL
CLOSED CAPTION SETTING
SCREEN SETTING
STARTUP LOGO
STARTUP LOGO
AUTO SETUP SETTING
SHUTTER SETTING
SIGNAL SEARCH
BACK COLOR
P-TIMER
OTHER FUNCTIONS
BACK COLOR
P-TIMER
OTHER FUNCTIONS
3) Press the <ENTER> button.
f
You can operate the sub-menus of the selected main menu.
POSITION
PICTURE
PT-VMZ50
LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
SECURITY
NETWORK
ENTER
SELECT
RETURN
FUNCTION
ASSIGNED FUNCTION:
DISABLE
AUTO
AUTO
AUTO
AUTO
ON
BLUE
ON
BLUE
DEFAULT LOGO
ON-SCREEN DISPLAY
HDMI SIGNAL LEVEL
DIGITAL LINK SIGNAL LEVEL
CLOSED CAPTION SETTING
DIGITAL LINK SIGNAL LEVEL
CLOSED CAPTION SETTING
SCREEN SETTING
STARTUP LOGO
STARTUP LOGO
AUTO SETUP SETTING
SHUTTER SETTING
SIGNAL SEARCH
BACK COLOR
P-TIMER
OTHER FUNCTIONS
BACK COLOR
P-TIMER
OTHER FUNCTIONS
4) Press as to select the desired sub-menu item, press qw or the <ENTER> button to switch or adjust
settings.
f
Depending on the item, each time you press the qw button, items are switched in order as shown below.
A
B
C
ENGLISH - 59
Chapter 4 Settings - On-screen menu
2.1. On-screen
INF-8
SECTION 1 SERVICE INFORMATION
<VMZ60/VMZ50/VMZ40/VMW60/VMW50>
f
Depending on the item, each time you press the qw button, the individual adjustment screen with a bar
scale is displayed as shown below.
+5
CONTRAST
Note
f
Pressing the <MENU> button while the menu screen is displayed will return the previous menu. You can operate in the same way by pressing
the <RETURN> button.
f
Some items may not be adjusted or used depending on the selected signals or input signals to the projector. The menu items that cannot be
adjusted or used are shown in gray characters, and they cannot be selected.
f
Some items can be adjusted even if signals are not input.
f
Individual adjustment screen disappears automatically if no ope
f
For menu items, refer to “Main menu” and “Sub menu” .
Resetting adjustment values to the factory default
If the <DEFAULT> button on the remote control is pressed, the values adjusted in the menu items are restored to
the factory default settings.
button
1) Press the <DEFAULT> button on the remote control.
Note
f
You cannot reset all the settings to the factory default at a time.
f
To reset all the settings adjusted in the sub-menu item to the factory default at a time, execute the [PROJECTOR SETUP] menu →
[INITIALIZE ALL].
f
Some items cannot be reset by pressing the <DEFAULT> button on the remote control. Adjust these items individually.
Main menu
The main menu consists of the following seven menu items.
When a main menu item is selected, the cursor moves to its sub menu.
Main-menu item
[PICTURE]
[POSITION]
[LANGUAGE]
[DISPLAY OPTION]
[PROJECTOR SETUP]
[SECURITY]
[NETWORK]
60 - ENGLISH
Chapter 4 Settings - On-screen menu
INF-9
SECTION 1 SERVICE INFORMATION
<VMZ60/VMZ50/VMZ40/VMW60/VMW50>
Sub menu
You can set and adjust the items in each submenu.
[PICTURE]
Sub-menu item
Factory default
[PICTURE MODE]
[STANDARD]
[CONTRAST]
[0]
[BRIGHTNESS]
[0]
[COLOR]
[0]
*1
[TINT]
[0]
[SHARPNESS]
[9]
[COLOR TEMPERATURE]
[DEFAULT]
[GAMMA]
[0]
[ADVANCED MENU]
—
[DAYLIGHT VIEW]
[AUTO]
[DIGITAL CINEMA REALITY]
[ON]
[NOISE REDUCTION]
[OFF]
[DYNAMIC CONTRAST]
[OFF]
[TV-SYSTEM]
[AUTO]
[RGB/YP
B
P
R
] / [RGB/YC
B
C
R
]
[AUTO]
[RGB-SYSTEM]
[1280x768/60]*
1
*1 It depends on the input signal.
[POSITION]
Sub-menu item
Factory default
[REALTIME KEYSTONE]
[ON]
[SCREEN ADJUSTMENT]
—
[SHIFT]
—
[DOT CLOCK]
[0]
[CLOCK PHASE]
[0]
[OVER SCAN]
[0]*
1
[ASPECT]
[NORMAL]*
1
[FRAME LOCK]
[ON]
[CLAMP POSITION]
[24]
*1
*1 It depends on the input signal.
[LANGUAGE]
● Various menus, settings, adjustment screens, control button names, etc., are displayed in the selected language.
● The language can be changed to English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Finnish,
Norwegian, Danish, Polish, Hungarian, Romanian, Czech, Russian, Turkish, Arabic, Kazakh, Vietnamese, Korean,
Chinese, Japanese and Thai.
[DISPLAY OPTION]
Sub-menu item
Factory default
[ON-SCREEN DISPLAY]
-
[HDMI SIGNAL LEVEL]
[AUTO]
[DIGITAL LINK SIGNAL LEVEL]
*1
[AUTO]
[CLOSED CAPTION SETTING]
-
[SCREEN SETTING]
-
[STARTUP LOGO]
[DEFAULT LOGO]
[SHUTTER SETTING]
—
[AUTO SETUP SETTING]
[AUTO]
[SIGNAL SEARCH]
[ON]
[BACK COLOR]
[BLUE]
[P-TIMER]
-
[OTHER FUNCTIONS]
-
*1 Not available for PT-VMZ40.
ENGLISH - 61
Chapter 4 Settings - On-screen menu
INF-10
SECTION 1 SERVICE INFORMATION
<VMZ60/VMZ50/VMZ40/VMW60/VMW50>
[PROJECTOR SETUP]
Sub-menu item
Factory default
[STATUS]
-
[COMPUTER2 SELECT]
[COMPUTER2 IN]
[PROJECTOR ID]
[ALL]
[INITIAL START UP]
[LAST MEMORY]
[PROJECTION METHOD]
[AUTO]
[ECO MANAGEMENT]
-
[RS-232C]
-
[FUNCTION BUTTON]
-
[AUDIO SETTING]
-
[TEST PATTERN]
-
[FILTER COUNTER]
-
[INITIALIZE ALL]
-
[SECURITY]
Sub-menu item
Factory Default
[PASSWORD]
[OFF]
[PASSWORD CHANGE]
-
[TEXT DISPLAY]
[OFF]
[TEXT CHANGE]
-
[MENU LOCK]
[OFF]
[MENU LOCK PASSWORD]
-
[CONTROL DEVICE SETUP]
-
[NETWORK]
Sub-menu item
Factory default
[DIGITAL LINK MODE]
*1
[AUTO]
[DIGITAL LINK STATUS]
*1
-
[DIGITAL LINK MENU]
*1
-
[WIRED LAN]
-
[PROJECTOR NAME]
-
[NETWORK CONTROL]
-
[MEMORY VIEWER]
-
[NETWORK STATUS]
-
[INITIALIZE]
-
Note
f
Some items may not be adjusted or used for certain signal formats to be input to the projector.
The menu items that cannot be adjusted or used are shown in gray characters, and they cannot be selected.
f
Sub-menu items and factory default settings differ depending on the selected input.
62 - ENGLISH
Chapter 4 Settings - On-screen menu
*1 Not available for PT-VMZ40.
Click on the first or last page to see other PT-VMZ60 / PT-VMZ50 / PT-VMZ40 / PT-VMW60 / PT-VMW50 (serv.man3) service manuals if exist.