Panasonic PT-RZ770 / PT-RW730 / PT-RZ660 / PT-RW620 (serv.man2) Service Manual ▷ View online
SECTION
1
INF-1
CONTENTS
1. Main differences of parts in series model . . . . . . . . . . . . . . . . . . . . . INF-2
2. The name of each part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-3
2. The name of each part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-3
2. 1 Projector body
2. 2 Control panel
2. 3 Connecting terminals
2. 4 Remote controls
2. 2 Control panel
2. 3 Connecting terminals
2. 4 Remote controls
3. Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-7
4. Service Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-11
4. Service Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-11
4. 1. Setting to Service Mode
4. 2. Resetting to User Mode
4. 3. Functions of Service Mode
4. 2. Resetting to User Mode
4. 3. Functions of Service Mode
5. Notes on service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-22
5. 1. Before service operation
5. 2. Service
5. 3. Security password
5. 2. Service
5. 3. Security password
6. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-25
6. 1. Power/Light source/Temperature indicators
6. 2. Shutdown system
6. 3. System log data acquisition method
6. 4. Troubleshooting
6. 2. Shutdown system
6. 3. System log data acquisition method
6. 4. Troubleshooting
SECTION 1 SERVICE INFORMATION
INF-2
SECTION 1 SERVICE INFORMATION
< RZ770/RW730/RZ660/RW620 >
1. Main differences of parts in series model
RZ970J/RW930J/RX110J
RZ770J/RW730J
RZ660J/RW620J
LD unit layout
LD unit (8 elements) × 8
LD unit (8 elements) × 6
LD shield plate × 2
LD unit (8 elements) × 2
LD unit (6 elements) × 4
LD shield plate × 2
PW1 fan
PW2 fan
PW1 fan and PW2 fan is mounted
Fan is not mounted
DMD cooling
Heat pipe type
Heatsink type
Projection lens
(models with lens)
Aluminum lens
tube type
Resin lens tube type
DMD chip
A - P.C.Board
DG - P.C.Board
D - P.C.Board
DR - P.C.Board
• Parts number of each models is different.
Please check the parts list.
LD shield plate
LD unit (6 elements)
PW1 fan
PW2 fan
INF-3
SECTION 1 SERVICE INFORMATION
< RZ770/RW730/RZ660/RW620 >
2. The name of each part
2. 1 Projector body
1
2
3
4
5
6
7
7
10
8
8
11
9
16
17
14
13
15
7
7
Front
Side
Rear
8
8
8
12
Projection direction
Bottom
1 Remote control signal receiver (front)
2 Power indicator <ON (G)/STANDBY (R)>
2 Power indicator <ON (G)/STANDBY (R)>
Indicates the status of the power.
3 Light source indicator <LIGHT1>
Indicates the status of light source 1.
4 Light source indicator <LIGHT2>
Indicates the status of light source 2.
5 Temperature indicator <TEMP>
Indicates the internal temperature status.
6 (Not used with this projector)
7 Adjustable feet
7 Adjustable feet
Adjusts the projection angle.
8 Air intake port
9 Projection lens
9 Projection lens
(Only models with lens)
10 Remote control signal receiver (rear)
11 Air exhaust port
12 Burglar hook port
11 Air exhaust port
12 Burglar hook port
Attaches a burglar prevention cable, etc.
13 Control panel
14 Connecting terminals
15 Security slot
14 Connecting terminals
15 Security slot
This security slot is compatible with the Kensington security
cables.
16 <MAIN POWER> switch
Turns on/off the main power.
17 <AC IN> terminal
Connect the supplied power cord.
Attention
f
Do not block the ventilation ports (intake and exhaust) of the projector.
INF-4
SECTION 1 SERVICE INFORMATION
< RZ770/RW730/RZ660/RW620 >
2. 2 Control panel
9
10
11
10
11
12
13
14
13
14
2
4
3
1
5
6
7
8
6
7
8
1 Power on <b> button
Sets the projector to projection mode when the <MAIN
POWER> switch on the projector is set to <ON> and the power
is turned off (standby mode).
2 Power standby <v> button
Sets the projector to the state where the projector is turned
off (standby mode) when the <MAIN POWER> switch on the
projector is set to <ON> and in projection mode.
3 <RGB1> button
Switches the input to RGB1.
4 <RGB2> button
Switches the input to RGB2.
5 <DVI-D> button
Switches the input to DVI-D.
6 <HDMI> button
Switches the input to HDMI.
7 <DIGITAL LINK> button
Switches the input to DIGITAL LINK.
8 <SDI> button
Switches the input to SDI.
(Only for PT-RZ770, PT-RZ660)
9 <MENU> button
Displays or hides the main menu.
Returns to the previous menu when a sub-menu is displayed.
If you press the <MENU> button on the control panel for at least
three seconds while the on-screen display is off (hidden), the
on-screen display is turned on.
10 <LENS> button
Adjusts the focus, zoom, and shift (position) of the lens.
11 <ENTER> button
Determines and executes an item in the menu screen.
12 <SHUTTER> button
Used to temporarily turn off the image.
13 asqw selection buttons
13 asqw selection buttons
Used to select an item in the menu screen, change the setting,
and adjust the level.
Also used to enter a password in [SECURITY] or enter
characters.
14 <AUTO SETUP> button
Automatically adjusts the image display position while
the image is projected. [PROGRESS] is displayed during
the automatic adjustment.
Click on the first or last page to see other PT-RZ770 / PT-RW730 / PT-RZ660 / PT-RW620 (serv.man2) service manuals if exist.