Panasonic PT-RCQ10 / PT-RCQ80 (serv.man3) Service Manual ▷ View online
DIS-15
SECTION 2 DISASSEMBLY PROCEDURES
< RCQ10 / RCQ80 >
3. Unscrew 5 screws-B and remove the LD driver block.
4. 1) Unscrew 2 screws-C and remove the LD driver fan.
2) Unscrew 2 screws-D and remove the Exhaust 3 fan.
LD driver block
B
B
B
B
B
B
C
D
D
C
LD driver fan
Exhaust 3 fan
C
D
3. 4. LD driver block removal
1. Remove the Signal block following to step [3. 3. Signal block removal].
2. Unscrew 3 screws-A and remove the Exhaust fan block.
A
Exhaust fan block
A
A
A
DIS-16
SECTION 2 DISASSEMBLY PROCEDURES
< RCQ10 / RCQ80 >
5. 1) Unhook 4 clamps.
2) Unscrew 4 screws-E and remove the D-PCB top plate.
E
E
E
E
D-PCB top plate
Clampers
E
6. 1) Unscrew 4 screws-F and remove the DR-PCB for LD2.
2) Unscrew 4 screws-G and remove the DR-PCB for LD1.
3) Unscrew 4 screws-H and remove the D-PCB.
F
G
H
G
G
F
F
FF
H
H
H
H
F
G
G
DR-PCB (LD1)
D-PCB
DR-PCB (LD2)
DIS-17
SECTION 2 DISASSEMBLY PROCEDURES
< RCQ10 / RCQ80 >
A
A
A
A
A
A
Power unit block
A
3. 5. Power unit assy removal
1. Remove the Signal block following to step [3. 3. Signal block removal].
2. Unscrew 6 screws-A and remove the Power unit block.
3. 6. DMD block removal
1. Remove the Side cover (L) following to step [3. 2. Side cover (L/R), Front cover, Rear cover removal].
2. Unscrew 3 screws-A and remove the Lens cover.
A
A
A
Lens cover
A
DIS-18
SECTION 2 DISASSEMBLY PROCEDURES
< RCQ10 / RCQ80 >
3. 1) Unscrew 1 screw-B and remove the earth cable.
2) Unscrew 3 Torx screws-C and remove the CW cover.
t
Pay attention not to damage the flexible cable from the color wheel.
t
When assembling, make sure flexible cable is properly placed without slackness.
B
C
C
C
CW cover
Earth cable
• Color wheel removal
1) Unscrew 2 screws and remove the CW plate.
2) Unscrew 3 screws and remove the Color wheel.
Color wheel
CW plate
1)
2)
4. Unscrew 6 screws-D and remove the DMD block.
• To remove the flexible cable, refer to the instructions of [2. 2. Removing/inserting the flexible cable].
D
D
D
D
D
D
DMD block
D
B
C
Click on the first or last page to see other PT-RCQ10 / PT-RCQ80 (serv.man3) service manuals if exist.