Panasonic PT-RCQ10 / PT-RCQ80 (serv.man3) Service Manual ▷ View online
DIS-11
SECTION 2 DISASSEMBLY PROCEDURES
< RCQ10 / RCQ80 >
3. Unscrew 3 screws-B and remove the Side cover (R).
4. Release each hook on the Rear cover and remove it.
3. 2. Side cover (L/R), Front cover, Rear cover removal
1. Remove the Top cover following to step [3. 1. Top cover removal].
2. Unscrew 6 screws-A and remove the Side cover (L).
A
A
A
A
A
A
A
Side cover (L)
A
Side cover (R)
B
B
B
B
Rear cover
DIS-12
SECTION 2 DISASSEMBLY PROCEDURES
< RCQ10 / RCQ80 >
E
F
C
D
Front cover
5. 1) Unscrew 2 screws-C and remove NF-PCB.
2) Unscrew 2 screws-D and remove NF-PCB bracket.
6. Unscrew 3 screws-E, 2 screws-F and remove he DMD duct block.
7. Release each hook on the Front cover and remove it.
NF-PCB
NF-PCB bracket
C
D
D
C
DMD duct block
F
E
E
E
F
DIS-13
SECTION 2 DISASSEMBLY PROCEDURES
< RCQ10 / RCQ80 >
3. 3. Signal block removal
1. Remove the Side cover (L) following to step [3. 2. Side cover (L/R), Front cover, Rear cover removal].
2. Unscrew 3 screws-A and remove the Signal processing circuit block.
• To remove the flexible cable, refer to the instructions of [2. 2. Removing/inserting the flexible cable].
A
A
A
A
Signal processing circuit block
B
B
B
B
B
C
D
D
D
D
D
Fixing
scre
ws
DG-PCB
M1-PCB
SLOT cover
3. 1) Unscrew 5 fixing screws on the terminal metal.
2) Unscrew 5 screws-B and remove the DG-PCB.
• DG-PCB is connected to the A-PCB with direct connector. Take care not to damage connectors during
disassembling.
3) Unscrew 1 screw-C and remove the M1-PCB.
4) Unscrew 4 screw-D and remove the SLOT cover.
4
1
B
C
D
DIS-14
SECTION 2 DISASSEMBLY PROCEDURES
< RCQ10 / RCQ80 >
4. Unscrew 4 screws-E and remove the SLOT case.
5. 1) Remove 7 fixing screws of the each terminal.
2) Unscrew 4 screws-F and remove the A-PCB.
3) Unscrew 3 screws-G and remove the MA-PCB.
E
F
G
1
1
4
1
E
E
E
E
SLOT case
Fixing
scre
ws
A-PCB
F
F
F
F
MA-PCB
G G
G
Click on the first or last page to see other PT-RCQ10 / PT-RCQ80 (serv.man3) service manuals if exist.