Panasonic PT-MZ770 / PT-MW730 (serv.man3) Service Manual ▷ View online
INF-17
SECTION 1 SERVICE INFORMATION
<MZ770/MW730>
3. 3. 2. Additional function of each menu
1. [POSITION] menu
• [HDMI EQUALIZER] is added to a sub menu.
When noise contamination to HDMI input caused by long cable or ex-
ternal device, set this item so that the noise decreases. (AUTO/LOW/
MID/HIGH)
2. [ADVANCED] menu
• [FRAME LOCK] is added to a sub menu.
Set On if the motion picture is not stabled at RGB input. (ON/OFF)
3. [DISPLAY OPTION] menu
• [CUT OFF] is added to a sub menu.
Cut off the R, G or B color component.
INF-18
SECTION 1 SERVICE INFORMATION
<MZ770/MW730>
(2) The following special mode are added to sub menu [RS232C] - [EMULATE].
- MODE HI (other companies)
- MODE MI (other companies)
- MODE NE (other companies)
- MODE SO (other companies)
- MODE EP (other companies)
- MODE CH (other companies)
- MODE SA (other companies)
- OTHER (other companies/models)
- MODE SH (other companies)
* The sub-CPU firmware can not be updated when the emulate setting is selected to "MODE_**" or OTHER.
4. [PROJECTOR SETUP] menu
(1) The following two items are added to the sub-menu.
• [COOLING CONDITION]
- Fan control can be set manually according to the projection method. (Usually set to [AUTO].)
• [HIGH ALTITUDE MODE]
- Altitude can be set manually. (Usually set to [AUTO].)
INF-19
SECTION 1 SERVICE INFORMATION
<MZ770/MW730>
(3) [MODE IN-INPUT SELECT] is added on sub-menu [RS232C].
Assign the input select command when selecting the MODE_IN at EMULATE setting.
(4) The following items are added to the sub menu [STATUS].
1) Page 2
- VERTICAL TILT
Vertical angle
- HORIZONTAL TILT
Horizontal angle
2) Page 3
- DIGITAL LINK VERSION Firmware version of DIGITAL LINK
- FPGA VERSION
FPGA firmware version (FPGA1/FPGA2)
- LD DRIVER VERSION
LD Driver firmware version
- EMULATE
Emulate Setting status
-VERSION
Emulate version
INF-20
SECTION 1 SERVICE INFORMATION
<MZ770/MW730>
3) Page 5
- MAIN VERSION
Main CPU firmware version
- FPGA VERSION
FPGA firmware version [FPGA1/FPGA2]
- BMP VER.
Bitmap data version
- ENG ~ CC
Version of the each font data
4) Page 6
- TEMP (℃)
Intake temp. (IN)/Exhaust temp. (OUT
LD1 temp.(LD1)/LD2 temp. (LD2)
Filter temp. (FILTER)/LCD temp.(LCD)
Color sensor temp. R (COL R)/ B (COL B)
- FAN MODE
Fan control mode (TYPE A ~ TYPE J)
- CLOG
Clog fan mode up information
(0: non, +1: Level1, +2: Level2)
- atm
Air pressure [hPa]
- P INTAKE
Power intake fan status [rpm]
- P EXHAUST
Power exhaust fan status [rpm]
- LCD R
LCD R cooling fan status [rpm]
- LCD G
LCD G cooling fan status [rpm]
- LCD B
LCD B cooling fan status [rpm]
- PBS
PBS cooling fan status [rpm]
- PW
PW cooling fan status [rpm]
- LD
LD exhaust fan status [rpm]
5) Page 7
- ON COUNT
LD on times
- RUNTIME
LD runtime
- LD STATUS
LD status (0: Off, 1: On)
Click on the first or last page to see other PT-MZ770 / PT-MW730 (serv.man3) service manuals if exist.