Panasonic PT-MZ770 / PT-MW730 (serv.man3) Service Manual ▷ View online
ADJ-17
SECTION 3 ADJUSTMENTS
<MZ770/MW730>
7. After loading the firmware, a checkmark and path name to the firmware and the version will be displayed on the "Version
Information" window.
* Uncheck the firmware name if you do not want to update the firmware.
Click [Update] button to start updating of the firmware if the all information is right
8. Click [OK] button to start updating if the firmware version is right.
During updating, the LED indicators on the projector will light as table below.
ON/STANDBY
LIGHT
TEMP
MAIN
Blink in red
Blink in red alternately
Blink in red alternately
SUB
Off
Light in red
Light in red
NETWORK
Light in red
Blink in red
-
LD DRIVER
Light in green
Light in red
Light in red
DIGITAL LINK
Light in red
Blink in red
-
ADJ-18
SECTION 3 ADJUSTMENTS
<MZ770/MW730>
9. After finishing the updating, the confirmation message is displayed. Click [OK] button.
10. Click [EXIT] button to quit the tool.
After finishing the updating, restart the main power of projector, and check that the version of firmware is updated
definitely. Check the version of each firmware on the sub menu [STATUS] from the main menu [PROJECTOR
SETUP]. As the version of DIGITAL LINK and LD driver are available in the service mode only. Enter the service
mode (EXTRA OPTION) first and check them on the [STATUS] menu.
The updating of the same version
of firmware will be skipped.
ADJ-19
SECTION 3 ADJUSTMENTS
<MZ770/MW730>