Panasonic PT-MZ770 / PT-MW730 (serv.man3) Service Manual ▷ View online
INF-9
SECTION 1 SERVICE INFORMATION
<MZ770/MW730>
Chapter 4 Settings — Menu navigation
82 - ENGLISH
Main menu item
[DISPLAY LANGUAGE]
[DISPLAY OPTION]
[PROJECTOR SETUP]
[TEST PATTERN]
[SIGNAL LIST]
[SECURITY]
[NETWORK/USB]
Sub-menu
The sub-menu of the selected main menu item is displayed, and you can set and adjust items in the sub-menu.
[PICTURE]
Sub-menu item
Factory default
[PICTURE MODE]
[STANDARD]
*1
[CONTRAST]
[0]
[BRIGHTNESS]
[0]
[COLOR]
[0]
*2
[TINT]
[0]
[COLOR TEMPERATURE]
[DEFAULT]
*2
[GAMMA]
[0]
[DAYLIGHT VIEW]
[AUTO]
*2
[SHARPNESS]
[+6]
*2
[NOISE REDUCTION]
[OFF]
*2
[DYNAMIC CONTRAST]
[OFF]
*2
[SYSTEM SELECTOR]
[AUTO]
*1
*1 Depends on the signal input.
*2 Depends on the [PICTURE MODE].
[POSITION]
Sub-menu item
Factory default
[SHIFT]
―
[ASPECT]
[NORMAL]
*1
[ZOOM]
―
[CLOCK PHASE]
[0]
*1
[REALTIME KEYSTONE]
[OFF]
[SCREEN ADJUSTMENT]
[OFF]
*1 Depends on the signal input.
[ADVANCED MENU]
Sub-menu item
Factory default
[DIGITAL CINEMA REALITY]
[AUTO]
*1
[BLANKING]
―
[INPUT RESOLUTION]
―
[CLAMP POSITION]
[24]
*1
INF-10
SECTION 1 SERVICE INFORMATION
<MZ770/MW730>
Chapter 4 Settings — Menu navigation
ENGLISH - 83
Sub-menu item
Factory default
[RASTER POSITION]
―
*1 Depends on the signal input.
Note
f
The factory default setting varies depending on the selected input terminal.
[DISPLAY LANGUAGE]
You can select the language of the on-screen display.
Various menus, settings, adjustment screens, control button names, etc., are displayed in the selected language.
The language can be switched to English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Finnish,
Norwegian, Danish, Polish, Hungarian, Romanian, Czech, Russian, Turkish, Arabic, Kazakh, Vietnamese, Chinese,
Korean, Japanese, and Thai.
[DISPLAY OPTION]
Sub-menu item
Factory default
[COLOR ADJUSTMENT]
[OFF]
[COLOR CORRECTION]
[OFF]
[SCREEN SETTING]
―
[AUTO SIGNAL]
[OFF]
[AUTO SETUP]
―
[RGB IN]
―
[HDMI IN]
―
[DIGITAL LINK IN]
―
[ON-SCREEN DISPLAY]
―
[CLOSED CAPTION SETTING]
―
[SIGNAL SEARCH]
[ON]
[BACK COLOR]
[BLUE]
[STARTUP LOGO]
[DEFAULT LOGO]
[SHUTTER SETTING]
―
[P-TIMER]
―
[FREEZE]
―
[DIGITAL ZOOM]
―
[PROJECTOR SETUP]
Sub-menu item
Factory default
[PROJECTOR ID]
[ALL]
[PROJECTION METHOD]
―
[ECO MANAGEMENT]
―
[LightID]
[OFF]
[INITIAL STARTUP]
[LAST MEMORY]
[STARTUP INPUT SELECT]
[LAST USED]
[DATE AND TIME]
―
[SCHEDULE]
[OFF]
[RS-232C]
―
[REMOTE1 MODE]
[DEFAULT]
[FUNCTION BUTTON]
―
[LENS CALIBRATION]
―
[AUDIO SETTING]
―
[FILTER COUNTER]
―
[DC OUT]
[ON]
[STATUS]
―
[DATA CLONING]
―
[SAVE ALL USER DATA]
―
[LOAD ALL USER DATA]
―
[INITIALIZE]
―
[SERVICE PASSWORD]
―
INF-11
SECTION 1 SERVICE INFORMATION
<MZ770/MW730>
Chapter 4 Settings — Menu navigation
84 - ENGLISH
[TEST PATTERN]
Display the test pattern built-in to the projector.
Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before
performing various adjustments.
[SIGNAL LIST]
Registering new signals.
Renaming the registered signal.
Deleting the registered signal.
[SECURITY]
Sub-menu item
Factory default
[SECURITY PASSWORD]
[OFF]
[SECURITY PASSWORD CHANGE]
―
[DISPLAY SETTING]
[OFF]
[TEXT CHANGE]
―
[MENU LOCK]
[OFF]
[MENU LOCK PASSWORD]
―
[CONTROL DEVICE SETUP]
―
[CONTROL DEVICE PASSWORD CHANGE]
―
[NETWORK/USB]
Sub-menu item
Factory default
[DIGITAL LINK MODE]
[AUTO]
[DIGITAL LINK STATUS]
―
[DIGITAL LINK MENU]
―
[WIRED LAN]
―
[WIRELESS LAN]
*1
[SIMPLE]
[PROJECTOR NAME]
―
[NETWORK CONTROL]
―
[MEMORY VIEWER]
―
[Panasonic APPLICATION]
―
[MIRRORING]
*1
―
[NETWORK STATUS]
―
*1 The sub-menu item can be selected when the optional Wireless Module (Model No.: ET-WM300) is attached.
Note
f
Some items may not be adjusted or used for certain signal formats to be input to the projector.
The item in the menu screen is displayed in black text when it cannot be adjusted or selected.
f
Display of the sub-menu item and the value of factory default setting vary depending on the selected input.
INF-12
SECTION 1 SERVICE INFORMATION
<MZ770/MW730>
3. Service Mode
This projector has Service Mode in addition to standard on-screen menus (User Mode).
This mode enables some menu settings for the service operation.
3. 1. Setting to Service Mode
1. Press the [MENU] button on the control panel of the projector or on the remote controller to display
the main menu on the screen.
2. Select a sub menu "service password" of the main menu "projector setup" and press the [ENTER] button.
3. Input the password "1565" by remote controller and press the [ENTER] button.
4. Press the [MENU] button. "SERVICE MODE" (MAIN MENU) will be displayed.
3. 2. Resetting to User Mode
1. Press the [MENU] button on the control panel of the projector or on the remote controller to display the main menu.
2. Select a sub menu "service password" of the main menu "projector setup" and press the [ENTER] button.
3. Input the password "0000" by remote controller and press the [ENTER] button.
4. Press the [MENU] button. "USER MODE" (MAIN MENU) will be displayed.
3. 3. Functions of Service Mode
* Function varies according to a version of the main microcomputer software.
3. 3. 1. EXTRA OPTION
"EXTRA OPTION" is added to the bottom of the main menu.
SERVICE PASSWORD
INPUT
SET
ENTER
SERVICE PASSWORD
SERVICE MODE
RETURN
MENU
SERVICE PASSWORD
INPUT
SET
ENTER
SERVICE PASSWORD
USER MODE
RETURN
MENU
1. CMS
• Setting of the Color Management (Color space converter) System operation.
- ON : Enable the Color Management system function. (Default setting)
- OFF : Disable the Color Management system function.
EXTRA OPTION
1/2
CMS
SELF CHECK
SHUTTER KEEP
ON
OFF
L
NORMAL
FLICKER ADJUST
POWER OFF MESSAGE
ERROR OSD
MODEL
PANEL TYPE SETTING
PANEL DRIVE SETTING
KEYSTONE CALIBRATION
CLOG SENSOR CALIBRATION
RGB PIXEL ADJUST
GHOST FB CALIBRATION
POWER OFF MESSAGE
ERROR OSD
MODEL
PANEL TYPE SETTING
PANEL DRIVE SETTING
KEYSTONE CALIBRATION
CLOG SENSOR CALIBRATION
RGB PIXEL ADJUST
GHOST FB CALIBRATION
MENU SELECT
SUB MENU
ENTER
1.
2.
4.
8.
6.
9.
5.
3.
7.
11.
12.
10.
EXTRA OPTION
2/2
INDICATOR SETTING
DIGITAL LINK OPTION
DIGITAL LINK OPTION
NORMAL
ON
0
DEFAULT
COLOR CONTROL
DEFAULT NETWORK ACCOUNT
WIRELESS REGION SELECT
DEFAULT NETWORK ACCOUNT
WIRELESS REGION SELECT
ON
HDMI NOISE MUTE
0ms
WAIT UNMUTE
0
SIGNAL SENSITIVITY
MENU SELECT
SUB MENU
ENTER
0SEC.
COMMAND CONTROL TIMEOUT
13.
15.
14.
16.
17.
18.
18.
19.
20.
20.
21.
Click on the first or last page to see other PT-MZ770 / PT-MW730 (serv.man3) service manuals if exist.