Panasonic PT-DZ13KU / PT-DZ13KE / PT-DZ13KT / PT-DS12KU / PT-DS12KE / PT-DW11KU / PT-DW11KE / PT-DZ10KU / PT-DZ10KE (serv.man2) Service Manual ▷ View online
DIS-3
1. 3. Mechanism element parts location
Upper Case
Engine Block Case(Top)
DMD Block
Power Supply Block
Signal Processing Block
Synthesis Block
Analysis Block
Rear Cover
Ballast Block
Analysis Mirror
Lens Mount (Assy)
Intake Duct
Bottom Cover
Air Filter
DIS-4
2. Disassembly Instructions
2. 1. Flowchart for Disassembly
* Before Disassembly the projector, turn off the POWER switch and disconnect the power plug from the wall outlet.
* To assemble, reverse the disassembly procedures.
* When tore off sticky tapes, please use a new thing without reusing it on the occasion of assembling.
(R/RM/RL/M2/F/R2-P.C.Board)
(B/Q-P.C.Board)
(P-P.C.Board)
(S-P.C.Board)
(A/G/WF/WL-P.C.Board)
Completed Product
2. 2.
Removal of Lamp Unit
2. 3.
Removal of Upper Case
2.10.
Removal of
Signal Processing Block
Signal Processing Block
2.11.
Removal of Ballast Block
2. 4.
2. 6.
2. 9.
Removal of Terminal Cover
2.12.
Removal of
Power Supply Block
Power Supply Block
Removal of Intake
Duct (Assy)
Duct (Assy)
2. 5.
Removal of Engine Block
Case (Top)/DMD Block
Case (Top)/DMD Block
2. 7.
Removal of Rod(Assy)/
Iris Unit (Assy) / Relay Lens
Iris Unit (Assy) / Relay Lens
2. 8.
Removal of Analysis/Synthesis
Block/Synthetic Mirror
Block/Synthetic Mirror
Removal of
Analysis Mirror (Assy)
Analysis Mirror (Assy)
2.13.
Removal of
Lens Mount (Assy)
Lens Mount (Assy)
DIS-5
2. 2. Removal of Lamp Unit
1. Loosen the 1 screw until it idles, then remove the Rear cover (Assy).
2. Loosen the 2 screws until they idle, hold the handles and pull the lamp unit out from the main unit.
2. 3. Removal of Upper Case (R/RM/RL/M2/F/R2 -P.C.Board)
1. Remove the projection lens. (* Move the lens to the home position before removing the projection lens.)
1) Remove the “Lens fixing screw”. (* Some types of the lens do not have the projection lens fixing screw hole.)
2) While holding down the “LOCK button”, turn the projection lens counterclockwise, and then pull it off.
2. Loosen the 1 screw until it idles, then remove the Rear cover (Assy).
Rear cover (Assy)
Lamp unit 1
Lamp unit 2
Lens fixing screw
Remove the first screw on the right side of the
mark (orange) of the projection lens with a
Phillips-head screwdriver.
mark (orange) of the projection lens with a
Phillips-head screwdriver.
Turn the projection lens counterclockwise until
its mark (orange) is aligned with the mark on
the projector ( on the left side of LOCK).
its mark (orange) is aligned with the mark on
the projector ( on the left side of LOCK).
DIS-6
3. Unscrew the 8 screws and remove the upper case.
Unscrew the 2 screws and remove the R-P.C.Board.
Unscrew the 2 screws and remove the RM-P.C.Board.
Unscrew the 2 screws and remove the RL-P.C.Board.
Unscrew the 1 screw and remove the M2-P.C.Board.
Unscrew the 2 screws and remove the F-P.C.Board.
Unscrew the 2 screws and remove the R2-P.C.Board.
2. 4. Removal of Intake Duct (Assy)
1. Remove the upper case according to the section 2.3. "Removal of Upper Case".
2. Unscrew the 5 screws and remove the Intake Duct (Assy).
XSB4+10FJK
XSB4+10FJK
Intake duct (assy)
XYN3+F8FJ
XYC3+FG10FJK
XTW3+8PFJ
XTW3+8PFJ
XYN3+F8FJ
R2-P.C.Board
RL-P.C.Board
M2-P.C.Board
F-P.C.Board
RM-P.C.Board
R-P.C.Board
Click on the first or last page to see other PT-DZ13KU / PT-DZ13KE / PT-DZ13KT / PT-DS12KU / PT-DS12KE / PT-DW11KU / PT-DW11KE / PT-DZ10KU / PT-DZ10KE (serv.man2) service manuals if exist.