Panasonic TX-P65VT60Y / TX-PR65VT60 Service Manual ▷ View online
17
6.6.
Data Copy by USB Memory
Note:
SD card can not be used for Data Copy.
6.6.1.
Purpose
(a) Board replacement (Copy the data when exchanging A-board):
When exchanging A-board, the data in original A-board can be copied to USB Memory and then copy to new A-board.
(b) Hotel (Copy the data when installing a number of units in hotel or any facility):
When installing a number of units in hotel or any facility, the data in master TV can be copied to USB Memory and then copy to
other TVs.
other TVs.
6.6.2.
Preparation
Make pwd file as startup file for (a) or (b) in a empty USB Memory.
1. Insert a empty USB Memory to your PC.
2. Right-click a blank area in a USB Memory window, point to New, and then click text document. A new file is created by default
2. Right-click a blank area in a USB Memory window, point to New, and then click text document. A new file is created by default
(New Text Document.txt).
3. Right-click the new text document that you just created and select rename, and then change the name and extension of the
file to the following file name for (a) or (b) and press ENTER.
File name:
(a) For Board replacement : boardreplace.pwd
(b) For Hotel : hotel.pwd
(b) For Hotel : hotel.pwd
Note:
Please make only one file to prevent the operation error.
No any other file should not be in USB Memory.
No any other file should not be in USB Memory.
18
6.6.3.
Data copy from TV set to USB Memory
1. Turn on the TV set.
2. Insert USB Memory with a startup file (pwd file) to USB terminal.
2. Insert USB Memory with a startup file (pwd file) to USB terminal.
On-screen Display will be appeared according to the startup file automatically.
3. Input a following password for (a) or (b) by using remote control.
(a) For Board replacement : 2770
(b) For Hotel : 4850
(b) For Hotel : 4850
Data will be copied from TV set to USB Memory.
It takes around 2 to 6 minutes maximum for copying.
It takes around 2 to 6 minutes maximum for copying.
4. After the completion of copying to USB Memory, remove USB Memory from TV set.
5. Turn off the TV set.
5. Turn off the TV set.
Note:
Following new folder will be created in USB Memory for data from TV set.
(a) For Board replacement : user_setup
(b) For Hotel : hotel
(b) For Hotel : hotel
19
6.6.4.
Data copy from USB Memory to TV set
1. Turn on the TV set.
2. Insert USB Memory with Data to USB terminal.
2. Insert USB Memory with Data to USB terminal.
On-screen Display will be appeared according to the Data folder automatically.
3. Input a following password for (a) or (b) by using remote control.
(a) For Board replacement : 2771
(b) For Hotel : 4851
(b) For Hotel : 4851
Data will be copied from USB Memory to TV set.
4. After the completion of copying to USB Memory, remove USB Memory from TV set.
(a) For Board replacement : Data will be deleted after copying (Limited one copy).
(b) For Hotel : Data will not be deleted and can be used for other TVs.
(b) For Hotel : Data will not be deleted and can be used for other TVs.
5. Turn off the TV set.
Note:
1. Depending on the failure of boards, function of Data copy for board replacement does not work.
2. This function can be effective among the same model numbers.
2. This function can be effective among the same model numbers.
20
7 Troubleshooting Guide
Use the self-check function to test the unit.
1. Checking the IIC bus lines
2. Power LED Blinking timing
2. Power LED Blinking timing
7.1.
Check of the IIC bus lines
7.1.1.
How to access
7.1.1.1.
Self-check indication only:
Produce TV reception screen, and while pressing [VOLUME ( - )] button on the main unit, press [OK] button on the remote control
for more than 3 seconds.
for more than 3 seconds.
7.1.1.2.
Self-check indication and forced to factory shipment setting:
Caution:
New key will be generated and previous TV programmes recorded in USB HDD will not be viewed. (See USB HDD
Recording)
Recording)
Produce TV reception screen, and while pressing [VOLUME ( - )] button on the main unit, press [MENU] button on the remote
control for more than 3 seconds.
control for more than 3 seconds.
7.1.2.
Screen display
7.1.3.
Check Point
Confirm the following parts if NG was displayed.
7.1.4.
Exit
Disconnect the AC cord from wall outlet or press the [POWER] button on the main unit for 3 seconds to turn off and then turn on
automatically.
automatically.
DISPLAY
Check Ref. No.
Description
Check Point
H14TUN
TU6708
TUNER
A-BOARD
H90STBY
IC8000
PEAKS-PRO4 (STM)
A-BOARD
H91MEM2
IC8900
NAND FLASH
A-BOARD
H30AVSW
IC3000
AV SW
A-BOARD
H38PANEL
PLASMA PANEL
A-BOARD/PLASMA PANEL
H38PD6
IC9300
PD6H
A-BOARD
H07TEMP
IC2001
TEMP SENSOR
A-BOARD
H17LAN
IC8650
ETHERPHY
A-BOARD
H00FE
IC6800, 31
DEMODULATOR
A-BOARD
H00SAT-TU
TU6707
SAT-TUNER
A-BOARD
H96ID
ID
A-BOARD
H97ID2
ID2
A-BOARD
H45BT
BLUETOOTH
A-BOARD/BLUETOOTH
H42WiFi
WiFi
A-BOARD/WiFi
H03FAN
FAN
A-BOARD/FAN
H21DSP
IC4900
AUDIO AMP
A-BOARD
H52CAMERA
CAMERA
A-BOARD/CAMERA
Click on the first or last page to see other TX-P65VT60Y / TX-PR65VT60 service manuals if exist.