Panasonic TH-85VX200W Service Manual ▷ View online
25
TH-85VX200W
2. Remove screws (
×21 ) and then remove the Rear
Cover ( D ).
9.3.
Removal of HX-Board
1. Disconnect the connector (A14).
2. Remove 2 Hexagonal-Head screws, 5 screws ( ), 1
2. Remove 2 Hexagonal-Head screws, 5 screws ( ), 1
screw ( ) and 4 screws ( ) and then remove the HX-
Board Block.
Board Block.
3. Turn over the HX-Board Block.
4. Disconnect the connector (HX1).
5. Remove 2 Hexagonal-Head screws, 1 screw ( ) and 1
4. Disconnect the connector (HX1).
5. Remove 2 Hexagonal-Head screws, 1 screw ( ) and 1
screw ( ) and then remove HX-Board.
9.4.
Removal of DS-Board
1. Remove HX-Board Block.
(Refer to Removal of HX-Board)
2. Remove 3 screws and then remove the DS-Board Fixing
Metal.
3. Disconnect the connector (DS44).
4. Remove the flexible cable from the connector (DS1).
5. Remove 2 screws and then remove DS-Board.
4. Remove the flexible cable from the connector (DS1).
5. Remove 2 screws and then remove DS-Board.
26
TH-85VX200W
9.5.
Removal of A-Board
Check that no bright points appears by Ve Life adjustment
after both D and A board exchange.
after both D and A board exchange.
1. Remove HX-Board Block.
(Refer to Removal of HX-Board)
2. Remove the DS-Board Fixing Metal.
(Refer to Removal of DS-Board)
1. Disconnect the connectors (A3, A6, A7, A8, A9, A22,
A33, A44).
2. Remove the flexible cables from the connectors (A1, A10,
A16).
3. Remove 3 screws and then remove A-Board.
Note:
A re-setup of the destination is performed by MS
mode after A-Board exchange.
mode after A-Board exchange.
9.6.
Removal of DN-Board
1. Disconnect the connectors (DN1, DN4, DN5, DN8).
2. Remove the flexible cables from the connectors (DN10,
2. Remove the flexible cables from the connectors (DN10,
DN16).
3. Remove 4 screws and then remove DN-Board.
9.7.
Removal of PB-Board
1. Disconnect the connectors (PB30, PB31, PB56, PB61,
PB62, PB64, PB66, PB69, PB71).
2. Remove 4 screws and then remove PB-Board.
27
TH-85VX200W
9.8.
Removal of D-Board
Check that no bright points appears by Ve Life adjustment
after both D and A board exchange.
after both D and A board exchange.
1. Remove the Eye Bolt (M12).
2. Remove 4 screws and then remove the Rear Cover Fix-
2. Remove 4 screws and then remove the Rear Cover Fix-
ing Metals (upper_center, lower_center).
3. Remove 4 screws and then remove the Rear Cover Angle
block (center).
4. Disconnect the connectors (D3, D4, D5, D21, D25).
5. Remove the flexible cables from the connectors (D20,
5. Remove the flexible cables from the connectors (D20,
D31, D32, D33, D34).
6. Remove 4 screws and then remove D-Board.
9.9.
Removal of P-Board (MAIN_1)
1. Disconnect the connectors (CM1, CM2, CM3, CM4, CM5,
P2, P6, P35).
2. Remove 3 screws ( ) and then remove P-Board protect
spacers.
3. Remove 7 screws ( ) and then remove P-Board
(MAIN_1).
9.10. Removal of P-Board (MAIN_2)
28
TH-85VX200W
1. Disconnect the connectors (CM1, CM2, CM3, CM4, P6,
P11, P35).
2. Remove 3 screws ( ) and then remove P-Board protect
spacers.
3. Remove 7 screws ( ) and then remove P-Board
(MAIN_2).
9.11. Removal of P-Board (SUB)
1. Remove the Rear Cover Angle block (center).
(Refer to Removal of D-board)
2. Disconnect the connectors (CS1, CS2, CS3, CS4, CS5,
CS6, CS7, CS8, CS9, P7, P9, P25, P34).
3. Remove 9 screws and then remove P-Board (SUB).
9.12. Removal of S1-Board and V2-
Board
1. Remove 1 screw ( ).
2. Remove 1 screw ( ) and then remove the Side Power
2. Remove 1 screw ( ) and then remove the Side Power
Unit.
9.12.1. Removal of S1-Board
1. Remove 2 screws (J) and then remove the Power Button
Bracket.
2. Remove 1 screw (K).
3. Disconnect the connector (S34) and then remove S1-
3. Disconnect the connector (S34) and then remove S1-
Board.
4. Remove 2 hooks and then remove the Power Button and
Power Button Spring.
Click on the first or last page to see other TH-85VX200W service manuals if exist.