Panasonic TH-85VX200W Service Manual ▷ View online
29
TH-85VX200W
9.12.2. Removal of V2-Board
1. Remove 2 screws (L).
2. Remove 1 screw (M) and then remove the Side Power
2. Remove 1 screw (M) and then remove the Side Power
SW Cover.
3. Disconnect the connector (V22) and then remove V2-
Board.
4. Remove 2 hooks and then remove the 5 Range Button
from V2-Board.
9.13. Removal of SU-Board
1. Remove the flexible cables from the connectors (SU1,
SU2, SU3, SU4, SU5, SU6, SU11).
2. Disconnect the connector (SU41).
3. Remove 4 screws ( ).
4. Remove 3 screws ( ) and then remove SU-Board.
3. Remove 4 screws ( ).
4. Remove 3 screws ( ) and then remove SU-Board.
Note: when fixing SU-Board
• Screw on 3 screws ( ) firstly.
9.14. Removal of SD-Board
1. Remove the Side Power Unit.
(Refer to Removal of S1-Board and V2-Board)
30
TH-85VX200W
2. Remove the flexible cables from the connectors (SD1,
SD2, SD3, SD4, SD5, SD6, SD11).
3. Disconnect the connectors (SD42, SD46).
4. Remove 5 screws ( ).
5. Remove 3 screws ( ) and then remove SD-Board.
4. Remove 5 screws ( ).
5. Remove 3 screws ( ) and then remove SD-Board.
Note: when fixing SD-Board
• Screw on 3 screws ( ) firstly.
9.15. Removal of SC-Board
1. Remove the Side Power Unit.
(Refer to Removal of S1-Board and V2-Board)
2. Remove 6 screws and then remove the Nuts For M12
Eye Bolt (side).
3. Disconnect the connectors (SU41, SD42, SD46).
4. Remove 9 screws ( ).
5. Remove 6 screws ( ) and then turn over SU-Board and
4. Remove 9 screws ( ).
5. Remove 6 screws ( ) and then turn over SU-Board and
SD-Board to the left.
Note:
Note:
Do not damage the Flexible Cables of SU-Board and
SD-Board, and the parts on SC-Board.
SD-Board, and the parts on SC-Board.
Note: when fixing SU-Board and SD-Board
• Screw on 6 screws ( ) firstly.
31
TH-85VX200W
6. Disconnect the connector (SC2).
7. Remove the flexible cable from the connector (SC20).
8. Remove 9 screws and then remove SC-Board.
7. Remove the flexible cable from the connector (SC20).
8. Remove 9 screws and then remove SC-Board.
9.16. Removal of SS2-Board
1. Disconnect the connector (SS34).
2. Remove the flexible cables from the connectors (SS51,
2. Remove the flexible cables from the connectors (SS51,
SS52, SS53, SS54).
3. Remove 5 screws and then remove SS2-Board.
9.17. Removal of SS3-Board
1. Disconnect the connector (SS32).
2. Remove the flexible cables from the connectors (SS59,
2. Remove the flexible cables from the connectors (SS59,
SS60, SS61, SS62).
3. Remove 5 screws and then remove SS3-Board.
9.18. Removal of SS-Board
Ve adjustment is performed by IIC mode after SS board
exchange.
exchange.
32
TH-85VX200W
1. Disconnect the connectors (SS11, SS21, SS32, SS34).
2. Remove the flexible cables from the connectors (SS55,
2. Remove the flexible cables from the connectors (SS55,
SS56, SS57, SS58).
3. Remove 13 screws and then remove SS-Board.
9.19. Removal of Fan
1. Disconnect the Fan Relay Connectors.
2. Remove 16 screws and then remove the Fan Blocks (1,
2, 3, 4).
3. Remove 8 screws and then remove the Fan (A, B).
4. Remove 8 screws and then remove the Fan (C, D).
5. Remove 4 screws and then remove the Fan (E).
6. Remove 8 screws and then remove the Fan (F, G).
7. Reassemble the Fans in reverse order.
Click on the first or last page to see other TH-85VX200W service manuals if exist.