DOWNLOAD Panasonic TH-85VX200W Service Manual ↓ Size: 6.87 MB | Pages: 82 in PDF or view online for FREE

9

TH-85VX200W

200 - 240  V AC, 50/60 Hz

Power on

1,200 W

Stand-by condition

0.5 W

Power off condition

0.3 W

Drive method: AC type 85-inch,
16:9 aspect ratio

1,889 mm (W) 

× 1,062 mm (H) × 2,167 mm (diagonal)

(No. of pixels)

2,073,600 (1,920 (W) 

× 1,080 (H))   [5,760 × 1,080 dots]

Temperature

0 

°C - 40 °C

Humidity

20 % - 80 %

Colour System

NTSC, PAL, PAL60, SECAM, Modified NTSC

Scanning format

525 (480) / 60i 60p, 625 (575) / 50i 50p, 750 (720) / 60p 50p, 1125 (1080) / 
60i 60p 50i 50p 24p 25p 30p 24sF, 1250 (1080) / 50i

PC signals

VGA, SVGA, XGA, SXGA
UXGA ..... (compressed)
Horizontal scanning frequency 15 - 110 kHz
Vertical scanning frequency 48 - 120 Hz

LAN

RJ45 10BASE-T/100BASE-TX, compatible with PJLink

TM

COMPONENT / RGB IN

Y / G (RCA Pin jack)

with sync 1.0 Vp-p (75-ohm)

P

B

/C

B

/B (RCA Pin jack)

0.7 Vp-p (75-ohm)

P

R

/C

R

/R (RCA Pin jack)

0.7 Vp-p (75-ohm)

AUDIO L-R (RCA Pin jack 

× 2)

0.5 Vrms

PC IN

(High-Density Mini-D-sub 15 Pin)

Y or G with sync 1.0 Vp-p (75-ohm)
Y or G without sync 0.7 Vp-p (75-ohm)

P

B

 / C

B

 / B: 0.7 Vp-p (75-ohm)

P

R

 / C

R

 / R: 0.7 Vp-p (75-ohm)

HD / VD: 1.0 - 5.0 Vp-p (high impedance)

VBS (use HD port)

with picture 1.0 Vp-p (high impedance)
without picture 0.3 Vp-p (high impedance)

AUDIO (Stereo mini jack (M3) 

× 1)

0.5 Vrms

AV IN

HDMI 1-4 (TYPE A Connector 

× 4)

HDMI (Version 1.4 with 3D)

SERIAL

External Control Terminal (D-sub 9 Pin) 

RS-232C compatible

3D SHUTTER OUT

(M3 jack 

× 1, for 3D IR TRANSMITTER)

AUDIO OUT

L-R (RCA Pin Jack 

× 2 (L / R))

Output level : Variable (-

 -  0 dB)

[INPUT 1 kHz / 0 dB, 10 kohm Load]

Remote Control Transmitter

N2QAYB000562

Batteries

R6 (UM3) Size 

× 2

Fixing band

TMME203 

× 2

Clamper

TMM15412-2 

× 1 

× H × D)

2,015 mm 

× 1,195 mm × 99 mm 

approx. 117.0 kg net

• Design and specifications are subject to change without notice. Mass and dimensions shown are approximate.
• This equipment complies with the EMC standards listed below.

EN55022, EN55024, EN61000-3-2, EN61000-3-3.

10

TH-85VX200W

Option Menu for GPF13DMONV series

Option menus

default setting

Contents

Onscreen display

On

Enable/Disable to display input mode indication after power on and no signal
indication.

All Aspect

Off

Sets All Aspect mode (advanced aspect setting) or default aspect mode.

Auto Setup

Manual

Sets the operational mode of the automatic position adjustment in the POS./
SIZE memu.

Studio mode

Off

Switching functions in setting menus used for television studio applications.

3D Emitter

INT

Set the infrared transmitter for the 3D Eyewear.

Function button assign 1

3D settings

Set the function to operate when the FUNCTION button 1 to 2 on the remote
control is pressed.

Function button assign 2

Signal

3D Safety Precautions

On

Set show/hide 3D Safety Precautions during power ON.

Memory lock

Locks or unlocks saved profi les. Also for setting passwords.

11

TH-85VX200W

To exit the CAT mode, access the ID mode and switch off the main power.

Select the IIC mode by Up/Down button on the remote control at the front page of CAT mode and then press the OK button on the
remote control.

Subject and item are mentioned on [IIC mode structure].
To exit the IIC mode, press the RETURN button on the remote control.

12

TH-85VX200W

Select the CD mode by Up/Down button on the remote control at the front page of CAT mode and then press the [5] button on the
remote control more than 3 seconds.

Memory data change

To exit the CD mode, press the RETURN button on the remote control.

To use the network function, set each [Network Setup] setting and make sure to set the [Control I/F Select] to [LAN].

Select the NW mode by Up/Down button on the remote control at the front page of CAT mode and then press the OK button on
the remote control.

To exit the NW mode, press the RETURN button on the remote control.