Panasonic TH-85VX200W Service Manual ▷ View online
37
TH-85VX200W
4. Remove 16 screws and then remove Cabinet Block.
5. Pull the bottom of the Cabinet Block forward and lift.
6. Remove the Cabinet Block.
6. Remove the Cabinet Block.
9.29.1. Removal of Front Glass
1. Remove 40 screws and then remove the Fixed Angles
(left, right, upper, bottom).
2. Remove the Front Glass.
(Note)
• When removing the Front Glass from Cabinet, there
is a risk of the glass center bending damage.
• Be sure to lift the instruction six positions of the fig-
ure, when remove the Front Glass.
Note: when Front Glass is exchanged
• Paste the Sponges in order along each Fixed Angles
(upper, bottom, left, right).
Note
• The sponges are parts which cannot be recycled. Please
use the new article when you exchange the Front Glass.
9.29.2. Removal of V1-Board and V3-Board
38
TH-85VX200W
1. Remove 1 screw (N).
2. Disconnect the connector (V11) and then remove V1-
2. Disconnect the connector (V11) and then remove V1-
Board.
3. Remove 1 screw (P).
4. Disconnect the connector (V33) and then remove V3-
4. Disconnect the connector (V33) and then remove V3-
Board.
9.29.3. Removal of V-Board
1. Remove the Fixed Angle (bottom).
(Refer to Removal of Front Glass)
2. Disconnect the connectors (V1(L), V1(R)).
3. Remove 4 screws (Q).
4. Remove the V-Board Fixing Metals and then remove V-
3. Remove 4 screws (Q).
4. Remove the V-Board Fixing Metals and then remove V-
Board.
9.29.4. Removal of Cabinet Assy
1. Remove the Front Glass.
(Refer to Removal of Front Glass)
2. Remove V1-Board and V3-Board.
(Refer to Removal of V1-Board and V3-Board)
3. Remove the LED Panel and Remote Sensor Panel.
4. Remove 16 screws and then remove the Cabinet Corner
Stopper Metals.
39
TH-85VX200W
5. Remove the Cabinet Corner Joint Metals and Cabinets
(left, right, upper, bottom)
Note: when Cabinet is exchanged
• Paste the felts in order along each Fixed Angles (left,
right, upper, bottom).
• Make sure the felts do not protrude from the edge of the
cabinet.
Note
• The felts are parts which cannot be recycled. Please use
the new article when you exchange the Cabinet.
9.30. Removal of Plasma Display
Panel
The C1 (upper, lower), C2 (upper, lower), C3 (upper,
lower),C4 (upper, lower), SS, SS2, SS3, SC, SU, SD Boards
and, flexible cables between D-C Boards and D-SC Boards,
are connected with the Plasma Display Panel for the repair.
lower),C4 (upper, lower), SS, SS2, SS3, SC, SU, SD Boards
and, flexible cables between D-C Boards and D-SC Boards,
are connected with the Plasma Display Panel for the repair.
1. Remove the Rear Covers.
(Refer to Removal of Rear Cover)
2. Disconnect the connectors (A22, S34).
3. Disconnect 4 Relay Connectors.
4. Remove 1 screw ( ).
5. Remove 1 screw ( ) and then remove the Side Power
5. Remove 1 screw ( ) and then remove the Side Power
Unit.
40
TH-85VX200W
6. Remove 16 screws and then remove Cabinet Block.
7. Pull the bottom of the Cabinet Block forward and lift.
8. Remove the Cabinet Block.
8. Remove the Cabinet Block.
9. Remove 4 screws and then remove the Cabinet Position-
ing Metals (left, right).
10. Remove 1 Eye Bolt (M12).
11. Remove 2 Eye Bolt Covers M12.
12. Remove 2 Eye Bolt Covers.
13. Remove 4 screws and then remove the Rear Cover Fix-
ing Metals (upper_center, lower_center).
14. Remove 4 screws and then remove the Rear cover Angle
Block (center).
Click on the first or last page to see other TH-85VX200W service manuals if exist.