DOWNLOAD Panasonic TH-42PR11EH Service Manual ↓ Size: 20.33 MB | Pages: 127 in PDF or view online for FREE

21

TH-42PR11EH

1. Disconnect the connectors (P2, P6, P7 P9, P11, P12,

P25).

2. Remove 10 screws and then remove P-Board.

1. Remove the flexible cables from the connectors (SU1,

SU2, SU3, SU4, SU11, SD1, SD2, SD3, SD4).

2. Disconnect the connectors (SU41, SD42, SD46).
3. Remove 8 screws and then remove SU-Board and SD-

Board.

1. Disconnect the connectors (SU41, SD42, SD46).
2. Remove 8 screws.
3. Slide SU-Board and SD-Board to the left.

4. Disconnect the connectors (SC2, SC20).
5. Remove 6 screws and then remove SC-Board.

22

TH-42PR11EH

1. Disconnect the connectors (SS11, SS12, SS23, SS34).
2. Remove the flexible cables from the connectors (SS53A,

SS56A).

3. Remove 5 screws and then remove SS-Board.

1. Remove the Slot Block.

(Refer to remove of Slot Block).

2. Remove 2 screws ( ) and then remove the Ferrite Core

from the Stand Block (L, R).

3. Remove 12 screws ( ) and then remove the Stand Block

(L, R).

1. Remove the flexible cables from the connectors (C10,

C11).

2. Remove 8 screws ( ) and then remove the flexible

cables from the connectors (CB1, CB2, CB3, CB4).

3. Remove 4 screws ( ) and then remove C1-Board.

1. Remove 3 screws and then remove the AC-Inlet Block.

2. Remove the flexible cables from the connectors (C20,

C21).

3. Disconnect the connector (C23).
4. Remove 8 screws ( ) and then remove the flexible

cables from the connectors (CB5, CB6, CB7, CB8).

5. Remove 4 screws ( ) and then remove C2-Board.

23

TH-42PR11EH

1. Disconnect the connector (S1).
2. Remove 1 screw and then remove the Ground wire from

the S-Board Block.

3. Remove 1 screw (A) and then remove the S-Board Block.
4. Remove 2 screws (B) and then remove S-Board.

1. Remove 2 screws (C) and then remove the Plate (A).
2. Remove 2 screws (D).
3. Disconnect the connector (GK3) and then remove GK-

Board.

1. Remove 1 screw ( ) and then remove the Ferrite Core

from the Stand Block (L).

2. Remove 6 screws ( ).

3. Remove 2 screws.
4. Remove K-Board and disconnect the connector (K1).

24

TH-42PR11EH

1. Disconnect the Relay connectors (DS2, DS8, DS15).
2. Disconnect the connector (S1).
3. Remove 1 screw ( ) from the S-Board Block.
4. Remove 1 screw ( ) and then remove the Ferrite core

from the Stand Block (L).

5. Connected terminal hook is pushed, and the speaker lead

in 4 places is pulled out.

6. Remove 1 screw ( ) and then remove the Ferrite core

from the Stand Block (R).

7. Remove 10 screws ( ).

8. Pull the bottom of the Plasma Panel forward (arrow1).
9. Slide the Plasma Panel and then remove the Plasma

Panel (arrow2).

10. Remove the S-Board Block.

(Refer to Removal of S-Board)

11. Remove the K-Board.

(Refer to Removal of K-Board)

12. Remove the GK-Board.

(Refer to Removal of GK-Board)

13. Remove 5 screws (E) and then remove the Plate (B).
14. Remove 2 screws (F) and then remove the Control Panel.

15. Remove 1 screw (G) and then remove the Spring.
16. Remove 3 hooks and then remove the Door.
17. Remove 4 hooks and then remove the Power SW.