DOWNLOAD Panasonic TH-42PR11EH Service Manual ↓ Size: 20.33 MB | Pages: 127 in PDF or view online for FREE

25

TH-42PR11EH

18. Remove 26 screws and then remove the Glass Fixed

Plate (A, B, C, D).

19. Remove the Front Glass.
20. Remove 2 screws ( ) and then remove the Plate (L, R).
21. Remove 8 screws ( ) and then remove the Speaker (L,

R).

1. Remove the Cabinet.

(Refer to Removal of Cabinet and Speaker (L, R))
Note: when Front Glass is exchanged

• Along each fixed Angles of an top and bottom, right and

left order and the sponge for the Front Glass is pasted to
the Front Glass. 

• The sponges are parts which cannot be recycled. Please

use the new article when you exchange the Front Glass.

1. Remove 3 screws ( ) and then remove the Ferrite Core

from the Stand Block (L, R) and Plasma Panel.

2. Remove 12 screws ( ) and then remove the Stand Black

(L, R).

26

TH-42PR11EH

3. Remove the flexible cables from the connectors (DS1,

DS3).

4. Disconnect the connectors (DS4, DS6, DS7).
5. Disconnect the Relay Connectors (DS2, DS8, DS15).
6. Remove 5 screws and then remove the Slot Block.

7. Disconnect the connector (DN5).
8. Remove 4 screws and then remove the DN-Board and

Fixed Plate.

9. Disconnect the connector (D25).

10. Remove the flexible cables from the connectors (C11,

C21, SC20).

11. Remove 4 screws and then remove D-Board.

12. Disconnect the connectors (P2, P9, P11, P12).
13. Remove 10 screws and then remove P-Board.

14. Remove the flexible cables from the connectors (SU1,

SU2, SU3, SU4, SU11, SD1, SD2, SD3, SD4).

15. Disconnect the connectors (SU41, SD42, SD46).
16. Remove 8 screws and then remove SU-Board and SD-

Board.

27

TH-42PR11EH

17. Remove 6 screws and then remove SC-Board.
18. Remove the SC-Barrier.

19. Disconnect the connectors (C23, SS34).
20. Remove the flexible cables from the connectors (SS53A,

SS56A).

21. Remove 5 screws and then remove SS-Board.

22. Remove the flexible cable from the connectors (C10,

C20).

23. Remove 3 screws and then remove the AC-Inlet Block.

24. Remove 6 screws.

28

TH-42PR11EH

25. Lift up the bottom of the Plasma Panel in the direction of

the arrow 1 and pull the Plasma Panel in the direction of
the arrow 2 and then remove the Plasma Panel.

26. Remove the Rear Cover Hook Right and Rear Cover

Hook Left from the Plasma Panel.

27. Remove the 6 Spacers and Spacer Rings from the

Plasma Panel.

• Please confirm the installation place of Rear Cover Hook

Right, Rear Cover Hook Left, Spacer and Spacer Ring
when you exchange the Plasma Panel, and install them
in an original installation place after exchanging the
Plasma Panel.