Panasonic TH-103PF12E Service Manual ▷ View online
45
TH-103PF12E
Note: when Cabinet or Front Glass is exchanged
• You need new AL Tape kit when you exchange the Cab-
inet or Front Glass.
Note: when Cabinet is exchanged
• Paste the felts and Gaskets in order along each Fixed
Angles (left, right, upper, lower).
• Make sure the felts do not protrude from the edge of the
cabinet.
Note
• The felts are parts which cannot be recycled. Please use
the new article when you exchange the Cabinet.
9.38. Removal of Plasma Display
Panel
The C1 (upper, lower), C2 (upper, lower), C3 (upper, lower),
C4 (upper, lower), C5 (upper, lower), C6 (upper, lower), SS,
SS2, SS3, SC, SU, SM, SD Boards, and flexible cables
between D-C Boards and D-SC Boards, are connected with
the Plasma Display Panel for the repair.
C4 (upper, lower), C5 (upper, lower), C6 (upper, lower), SS,
SS2, SS3, SC, SU, SM, SD Boards, and flexible cables
between D-C Boards and D-SC Boards, are connected with
the Plasma Display Panel for the repair.
1. Remove the Rear Covers.
(Refer to Removal of Rear Cover)
2. Disconnect the connectors (DS15, P34).
46
TH-103PF12E
3. Remove 2 screws ( ).
4. Remove 2 screws ( ) and then slide the Side Power Unit
4. Remove 2 screws ( ) and then slide the Side Power Unit
upward.
5. Remove the Side Power Unit.
6. Remove 24 screws and then remove Cabinet Block.
7. Pull the bottom of the Cabinet Block forward and lift.
8. Remove the Cabinet Block.
8. Remove the Cabinet Block.
9. Remove each 4 screws (R) of the Plates.
10. Remove 3 Eye Bolts.
11. Remove 6 Eye Bolt Covers.
12. Remove 4 screws and then remove the Rear Cover
Angles (H).
47
TH-103PF12E
13. Remove 6 screws ( ).
14. Remove 4 screws ( ) and then remove the Rear Cover
14. Remove 4 screws ( ) and then remove the Rear Cover
Angles (upper_center, lower_center).
15. Disconnect the Fan Relay Connectors.
16. Remove 26 screws and then remove the Fan Blocks (1,
16. Remove 26 screws and then remove the Fan Blocks (1,
2, 3, 4, 5, 6, 7).
17. Disconnect the connectors (DN3, DN5, DN9).
18. Remove the flexible cables from the connectors (DN1,
18. Remove the flexible cables from the connectors (DN1,
DN2).
19. Remove 5 screws and then remove the DN-Board and
Fixed Plate.
20. Disconnect the connector (H51).
21. Remove 2 screws and then remove H5-Borad Block.
21. Remove 2 screws and then remove H5-Borad Block.
48
TH-103PF12E
22. Disconnect the connectors (DS4, DS6).
23. Remove 3 screws and then remove the Slot Block.
23. Remove 3 screws and then remove the Slot Block.
24. Disconnect the connectors of P-Board (Main_1) (CM1,
CM2, CM3, CM4, CM5, P2).
25. Disconnect the connector of C5-Board (lower) (C55).
26. Remove 10 screws and then remove P-Board (MAIN_1).
26. Remove 10 screws and then remove P-Board (MAIN_1).
27. Disconnect the connector of C5-Board (upper) (C55).
28. Disconnect the connectors of P-Board (Main_2) (CM1,
CM2, CM3, CM4, P6, P11).
29. Remove 10 screws and then remove P-Board (MAIN_2).
30. Disconnect the connectors (P9, P25).
31. Remove 9 screws and then remove P-Board (SUB).
31. Remove 9 screws and then remove P-Board (SUB).
32. Remove Duct Barrier K.
33. Disconnect the connector (SS21).
34. Remove the flexible cables from the connectors (D20,
34. Remove the flexible cables from the connectors (D20,
D31, D32, D33, D34).
35. Remove 4 screws and then remove D-Board.
Click on the first or last page to see other TH-103PF12E service manuals if exist.