Panasonic TH-103PF12E Service Manual ▷ View online
41
TH-103PF12E
1. Remove the Reinforcement Angle (lower_center).
(Refer to Removal of C3-Board (lower))
2. Remove the flexible cables from the connectors (C40,
C41, C42).
3. Remove 6 screws ( ) and then remove the flexible
cables from the connectors (CA9, CA10, CA11).
4. Remove 6 screws ( ) and then remove C4-Board (lower).
9.34. Removal of C5-Board (lower)
1. Remove the Reinforcement Angle (lower_right).
(Refer to Removal of SD-Board)
2. Disconnect the connector (C55).
3. Remove the flexible cables from the connectors (C50,
3. Remove the flexible cables from the connectors (C50,
C51).
4. Remove 6 screws ( ) and then remove the flexible
cables from the connectors (CA12, CA13, CA14).
5. Remove 6 screws ( ) and then remove C5-Board (lower).
9.35. Removal of C6-Board (lower)
1. Remove the Reinforcement Angle (lower_right).
(Refer to Removal of SD-Board)
2. Remove the flexible cable from the connector (C61).
3. Remove 4 screws ( ) and then remove the flexible
3. Remove 4 screws ( ) and then remove the flexible
cables from the connectors (CA15, CA16).
4. Remove 4 screws ( ) and then remove C6-Board (lower).
9.36. Removal of AC Inlet
42
TH-103PF12E
1. Remove 2 screws and then remove AC Inlet Cover.
2. Disconnect the connector (P9).
3. Remove 3 screws and then remove the AC Inlet.
3. Remove 3 screws and then remove the AC Inlet.
9.37. Removal of Front Glass, V1,
V3-Board and Cabinet Assy
1. Disconnect the connectors (DS15, P34).
2. Remove 2 screws ( ).
3. Remove 2 screws ( ) and then slide the Side Power Unit
3. Remove 2 screws ( ) and then slide the Side Power Unit
upward.
4. Remove the Side Power Unit.
5. Remove 24 screws and then remove Cabinet Block.
6. Pull the bottom of the Cabinet Block forward and lift.
7. Remove the Cabinet Block.
7. Remove the Cabinet Block.
43
TH-103PF12E
9.37.1. Removal of Front Glass
1. Remove 44 screws and then remove the Fixed Angles
(left, right, upper, lower).
2. Remove the Front Glass.
Note: when fixing Fixed Angle
• Screw on 4 screws (1) firstly.
(Note)
• When removing the Front Glass from Cabinet, there
is a risk of the glass center bending damage.
• Be sure to lift the instruction six positions of the fig-
ure, when remove the Front Glass.
Note: when Cabinet or Front Glass is exchanged
• You need new Aluminum Tape kit when you exchange
the Cabinet or Front Glass.
Note: when Front Glass is exchanged
• Paste the Sponges in order along each Fixed Angles
(left, right, upper, lower).
Note
• The sponges are parts which cannot be recycled. Please
use the new article when you exchange the Front Glass.
44
TH-103PF12E
9.37.2. Removal of V1-Board and V3-Board
1. Remove 1 screw (P).
2. Disconnect the connector (V1) and then remove V1-
2. Disconnect the connector (V1) and then remove V1-
Board.
3. Remove 1 screw (Q).
4. Disconnect the connector (V3) and then remove V3-
4. Disconnect the connector (V3) and then remove V3-
Board.
9.37.3. Removal of Cabinet Assy
1. Remove the Front Glass.
(Refer to Removal of Front Glass)
2. Remove V1-Board and V3-Board.
(Refer to Removal of V1-Board and V3-Board)
3. Remove the LED Panel and Remote Sensor Panel.
4. Remove 20 screws and then remove the Cabinet Joint
Metals (B, BS).
5. Remove 8 screws.
6. Remove the Cabinet Joint Metals (A, AS) and Cabinet
6. Remove the Cabinet Joint Metals (A, AS) and Cabinet
(left, right, upper, lower)
Click on the first or last page to see other TH-103PF12E service manuals if exist.