Panasonic CF-W5LWEZZBM Service Manual ▷ View online
81
9.3.6.12. Putting Sheet
Bottom sheet
Product number : T1208Z
Safety Work
- Affixes to the concave part.
(Does not begin to over from the concave part)
- The label does not float and there is no bubble.
(Does not begin to over from the concave part)
- The label does not float and there is no bubble.
Standard size
Affixation standard
Space of 0.5mm
Standard size
Space of 0.5mm
Figure 2
Figure 2
Figure 1
Figure 1
Has prepared DIMM cover
Product surface photograph
Edge side standard
in bottom opening
in bottom opening
Sheet edge
side standard
side standard
LCD cable fix sheet
LAN cable fix sheet
The flaking off paper
is not peeled off.
(Peels off in a
finished process)
is not peeled off.
(Peels off in a
finished process)
The flaking off paper
is not peeled off.
(Peels off in a
finished process)
is not peeled off.
(Peels off in a
finished process)
Product inside photograph
Affixation position
standard tool
standard tool
Tape affixation
screw (XSB2+4FNL)
Both sides tape affixation
82
9.3.6.13. Putting Labels
Battery sheet A
Battery sheet B
RJ rubber
Edge match
Externals match
Does not begin to see from externals.
Affixes in the denting part.
The paste does not overflow the edge side.
Does not begin to see from the denting part.
Does not run aground.
It is not possible to recycle.
Does not begin to see from the denting part.
Does not run aground.
It is not possible to recycle.
Top case’s metal mold line match
All aspects are firmly surely pressurized.
It is not possible to recycle.
It is not possible to recycle.
Safety Work
Product number confirmation
: T1208Y
: T1208Y
COA label
Model
name label
name label
S/N label
COA lamination seal
Affixes according to the ruled line.
Affixes according to the ruled line.
The direction of Microsoft of the hologram character
is set in the direction of the character of the COA
label.
is set in the direction of the character of the COA
label.
Left corner
of line match
of line match
The product back ratings signature board
Direction of
character (top)
character (top)
Direction of
character (top)
character (top)
Direction of
character (top)
character (top)
< affixation inclination standard >
The both ends difference is within 0.5mm.
Affixes according to the ruled line.
83
Vista capable label
Intel label
Energy star label
Label externals standard
Intel label externals standard
Intel label externals standard
Direction of
character (top)
character (top)
Vista capable label is put, and Intel label and and Energy star label are put.
< Labels affixation inclination standard >
The both ends difference is within 0.2mm.
Externals inspection after label is affixed
It is confirmed that the label paste has not overflowed.
Fit against the
bottom edge
bottom edge
HDD dumper
Pulls sheet who prevents
line being bitten out.
line being bitten out.
Connector connection
HDD is inserted in HDD case.
HDD case
HDD
PET tape
Round externals standard
HDD installation chart
9.3.6.14. Assembly of the HDD / HDD Cover
84
9.3.6.15. Putting Tapes for WWAN Antenna Cable
9.3.6.16. Assembly of the LCD Rear
LCD LEG rubber
Screw (DFHE5025XA)
HDD cover
Affixes to the concave part.
Tightens while suppressing the cover.
The model of no module installation
Line hold sheet
Screw (DFHE5025XA)
The Antenna cable connector is processed
to the part of board’s square frame.
to the part of board’s square frame.
A
B
LCD unit
Antenna cover
Screw (DXHM0057ZA)
SIMM cover is opened and the screw is tightened.
After the hook in the point part is
inserted (A), the opposite side is
pushed in (B).
inserted (A), the opposite side is
pushed in (B).
It is confirmed that the both ends of
antenna cover and the center of
antenna cover are convex does not
over 0.3mm.
antenna cover and the center of
antenna cover are convex does not
over 0.3mm.
Safety Work
Click on the first or last page to see other CF-W5LWEZZBM service manuals if exist.