Panasonic KX-TGP500B09 / KX-TPA50B09 (serv.man2) Service Manual ▷ View online
29
KX-TGP500B09/KX-TPA50B09
8.3.6.
TX-CW Mode for Handset
Note:
(*1) LCD displays the Channel number.
(exception: default/ CH01 = 01ch.)
(*2) Refer to Check Table for RF part (P.76).
(exception: default/ CH01 = 01ch.)
(*2) Refer to Check Table for RF part (P.76).
30
KX-TGP500B09/KX-TPA50B09
8.3.7.
RX-CW Test Mode for Handset
Note:
(*1) LCD displays the Channel number.
(exception: default/ CH01 = 01ch.)
(*2) Refer to Check Table for RF part (P.76).
(exception: default/ CH01 = 01ch.)
(*2) Refer to Check Table for RF part (P.76).
31
KX-TGP500B09/KX-TPA50B09
8.3.8.
Test Link Mode for Handset
Note:
(*1) LCD displays the Channel number.
(exception: default/ CH01 = 01ch.)
(*2) If can not proceed to the next step, refer to Registering a handset to the base unit in the Operating Instructions.
(*3) for factory use only.
(*4) Refer to Check Table for RF part (P.76).
(*5) Operation for regular base unit. Refer to CHART1 in the TEST RANGE Check (P.77).
(exception: default/ CH01 = 01ch.)
(*2) If can not proceed to the next step, refer to Registering a handset to the base unit in the Operating Instructions.
(*3) for factory use only.
(*4) Refer to Check Table for RF part (P.76).
(*5) Operation for regular base unit. Refer to CHART1 in the TEST RANGE Check (P.77).
32
KX-TGP500B09/KX-TPA50B09
8.3.9.
Adjustment Mode for Handset
Cross Reference
(*1) Adjust Battery Low Detector Voltage (Handset) (P.93)
Note:
(*2) These are the default values.
(*3) These values may not be fixed depending on the battery strength.
(*3) These values may not be fixed depending on the battery strength.
p
Click on the first or last page to see other KX-TGP500B09 / KX-TPA50B09 (serv.man2) service manuals if exist.