Panasonic UB-5335 / UB-5835 (serv.man2) Service Manual ▷ View online
29
(2) Attach the tray (C2) to the Screen Unit.
(3) Fix the tray (C2) with a screw.
• For UB-5335: Use 2 screws (a) (S4) and a screw (b) (S5).
• For UB-5835: Use 2 screws (a) (S4) and 2 screws (b) (S5).
• For UB-5835: Use 2 screws (a) (S4) and 2 screws (b) (S5).
30
4.6.9.
Attaching the Rear Cover (only for use of the optional Stand)
4.6.10. Cleaning the Screen Film Surface
After removing the double-sided tape at the Rear Cover (included
in the Stand), attach the rear cover while aligning it to the upper
end of the board attachment. Then, attach the rivets and the poly-
sliders (included in the Stand).
in the Stand), attach the rear cover while aligning it to the upper
end of the board attachment. Then, attach the rivets and the poly-
sliders (included in the Stand).
Gently wipe the screen film with a water-dampened cloth that has
been thoroughly wrung.
been thoroughly wrung.
Note:
1. Do not use thinner, benzine or cleaners containing abra-
sives, as this may result in discoloration.
2. Do not wipe the screen film with a dry cloth. (Doing so
can generate a static charge.)
31
4.7.
Installing the Thermal Transfer Film
(1) Connect the Power Cord (PW) to the outlet.
(2) Pull out the insulation sheet from the battery holder.
(3) Press the "Power Key", then set the current time.
(Refer to the Operating Instructions for details on setting the
current time.)
current time.)
Note:
When the power is turned on for the first time, the current
time needs to be set.
time needs to be set.
At first, the default setting of the lower 2 digits of
Christian year, month or day (depending on the
destination) is displayed. For example "01" ("12" for
China) is displayed.
Christian year, month or day (depending on the
destination) is displayed. For example "01" ("12" for
China) is displayed.
(4) Push down the Printer Open Lever to open the Printer Door.
Note:
Check that the display on the Display Window changes to
U -> 14 -> U -> 14 ->......
U -> 14 -> U -> 14 ->......
32
(5) Place the Thermal Transfer Film (F).
Click on the first or last page to see other UB-5335 / UB-5835 (serv.man2) service manuals if exist.